Items where Year is 2006

Annual Reports

Goswami, N G (2006) Annual Report 2005-2006. NML, Jamshedpur. ISBN 0972-4273

Article

Agrawal, A and Kumar, Vinay and Pandey, B D (2006) Remediation options for the treatmentf electroplating and leather tanning effluent containing chromium - A review. Mineral Processing & Extractive Metalllurgy, 27 . pp. 99-130.

Agrawal, A and Kumar, Vinay and Pandey, B D and Sahu, K K (2006) A comprehensive review on the hydro metallurgical process for the production of nickel and copper powders by hydrogen reduction. Materials Research Bulletin, 41 (4). pp. 879-892.

Agrawal, A and Kumari, S and Bagchi, D and Kumar, Vinay and Pandey, B D (2006) Hydrogen reduction of copper bleed solution from an Indian copper smelter for producing high purity copper powders. Hydrometallurgy, 84 (3-4). pp. 218-224.

Agrawal, A and Sahu, K K (2006) Kinetic and isotherm studies of cadmium adsorption on manganese nodule residue. Journal of Hazardous Materials, 137 (2). pp. 915-924.

Agrawal, A and Sahu, K K (2006) Separation and recovery of lead from a mixture of some heavy metals using Amberlite IRC 718 chelating resin. Journal of Hazardous Materials, 133 (1-3). pp. 299-303.

Alex, T C and Godiwalla, K M and Kumar, Sanjay and Jana, R K and Rao, A S and Singh, Manjit and Premchand, (2006) Studies on the extraction of manganese from sea nodule residue as ferrosilicomanganese. Steel Research International, 77 (3). pp. 147-151.

Balaraju, J N and Sankara Narayanan, T S N and Seshadri, S K (2006) Structure and phase transformation behaviour of electroless Ni–P composite coatings. Materials Research Bulletin, 41 (4). pp. 847-860.

Baskaran, Irusen and Sakthi Kumar, R and Sankara Narayanan, T S N and Stephen, A (2006) Formation of electroless Ni–B coatings using low temperature bath and evaluation of their characteristic properties. Surface and Coatings Technology, 200 (24). pp. 6888-6894.

Baskaran, Irusen and Sankara Narayanan, T S N and Stephen, A (2006) Effect of accelerators and stabilizers on the formation and characteristics of electroless Ni–P deposits. Materials Chemistry and Physics, 99 (1). pp. 117-126.

Baskaran, Irusen and Sankara Narayanan, T S N and Stephen, A (2006) Pulsed electrodeposition of nanocrystalline Cu–Ni alloy films and evaluation of their characteristic properties. Materials Letters, 60 (16). pp. 1990-1995.

Bhagat, R P and Chattoraj, U S and Sil, S K (2006) Porosity of Sinter and its relation with the sintering indices. ISIJ International, 46 (11). pp. 1728-1730.

Bhattamishra, A K (2006) Study of hot-dip galvanised zinc and zinc-copper alloy coatings in chloride and chloride containing carboxylic acids media. Journal of Metallurgy and Materials Science, 48 (4). pp. 215-220.

Bhunia, D and Mehrotra, S P and Shekhar, R (2006) A novel probe for measuring current distribution in Wood's metal in a simulated Hall–Heroult cell. Mineral Processing and Extractive Metallurgy, 115 (4). pp. 206-212.

Biswas, R K and Jana, R K and Habib, M A and Hasan, M M (2006) Processing of copper dust for tolerable iron containing electrolyte. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 115 (4). pp. 234-240.

Chaudhuri, S (2006) Some aspects of metallurgical assessment of boiler tubes—Basic principles and case studies. Materials Science and Engineering A, 432 (1-2). pp. 90-99.

Das, Goutam and Chakravarty, S and Dutta, A K and Das, Swapan K and Gupta, K K and Ghosh, R N (2006) Failure analysis of a high mast lamp post. Engineering Failure Analysis, 13 (7). pp. 1153-1158.

Das, Goutam and Ghosh, Sabita and Bose, S C and Ghosh, Sukomal (2006) Use of ball indentation technique to evaluate room temperature mechanical properties of a gas turbine blade. Materials Science and Engineering A, 424 (1-2). pp. 326-332.

Das, Goutam and Ghosh, Sabita and Ghosh, Sukomal (2006) Structure–property correlation of EN steel and evaluation of mechanical properties through BIT. NDT & E International, 39 (2). pp. 155-161.

Das, N N and Jana, R K (2006) Adsorption of some bivalent heavy metal ions from aqueous solutions by manganese nodule leached residues. Journal of Colloid and Interface Science, 293 (2). pp. 253-262.

Das, Suchandan K and Godiwalla, K M (2006) Mathematical modelling of thermal transport processes in Coke oven. 18th National & 7th ISHMT - ASME Heat and Mass Transfer Conference . pp. 2154-2161.

Das, Suchandan K and Godiwalla, K M and Mehrotra, S P and Dey, P K (2006) Mathematical modelling of erosion behaviour of impacted fly ash particles on coal fired boiler components at elevated temperature. High Temperature Materials And Processes , 25 (5-6). pp. 323-335.

Das, Suchandan K and Godiwalla, K M and Mehrotra, S P and Sastry, K K M and De, P K (2006) Analytical model for erosion behaviour of impacted fly-ash particles on coal-fired boiler components. Sadhana, 31 (5). pp. 583-595.

Das, Suchandan K and Goel, R P and Mehrotra, S P (2006) Mathematical Modelling of Blast Furnace Processes for Characterisation of the Internal State. Steel Tech, 1 (1). pp. 25-33.

Das, Swapan K and Chatterjee, S and Tarafder, S (2006) Tensile fracture behaviour of microstructurally engineered Cu bearing high strength low alloy steel. Materials Science and Technology, 22 (12). pp. 1409-1414.

Das, Swapan K and Sivaprasad, S and Das, S and Tarafder, S (2006) The effect of variation of microstructure on fracture mechanics parameters of HSLA-100 steel. Materials Science and Engineering A, 431 (1-2). pp. 68-79.

Das Bakshi, Srimanta and Basu, Bikramjit and Mishra, Suman K (2006) Fretting wear properties of sinter-HIPed ZrO2–ZrB2 composites. Composites Part A Applied Science and Manufacturing, 37 (10). pp. 1652-1659.

Das Bakshi, Srimanta and Basu, Bikramjit and Mishra, Suman K (2006) Microstructure and mechanical properties of sinter-HIPed ZrO2–ZrB2 composites. Composites Part A Applied Science and Manufacturing, 37 (11). pp. 2128-2135.

Datta, A K and Das, Goutam and De, P K and Ramachandrarao, P and Mukhopadhyay, M (2006) Finite element modeling of rolling process and optimization of process parameter. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing , 426 (1-2). pp. 11-20.

Dey, A K and Poddar, Palash and Singh, K K and Sahoo, K L (2006) Mechanical and wear properties of rheocast and conventional gravity die cast A356 alloy. Materials Science and Engineering A, 435-436 . pp. 521-529.

Dey, Swapna and Mandhyan, A K and Sondhi, S K and Chattoraj, I (2006) Hydrogen entry into pipeline steel under freely corroding conditions in two corroding media. Corrosion Science, 48 (9). pp. 2676-2688.

Dutta, A K and Das, Goutam and De, P K (2006) Finite element modelling of steel rolling process. Journal of Metallurgy and Materials Science, 48 (3). pp. 173-180.

Dutta, A K and Das, Goutam and De, P K (2006) Steel production in India and its impact in construction - A review. Journal of Metallurgy and Materials Science, 48 (4). pp. 205-214.

Garai, Subhadra and Upadhyay, A K and Sircar, J K (2006) Potassium ion-selective membrane electrode based on heterogeneous precipitate and PVC matrix. Journal of Metallurgy and Materials Science, 48 (2). pp. 103-108.

Ghosh, Arindam and Das, S and Chatterjee, S and Ramachandrarao, P (2006) Effect of cooling rate on structure and properties of an ultra-low carbon HSLA-100 grade steel. Materials Characterization, 56 (1). pp. 59-65.

Ghosh, Arindam and Shukla, R and Das, S and Chatterjee, S (2006) The structure and properties of a thermo-mechanically processed low carbon high strength steel. Steel Research International , 77 (4). pp. 276-283.

Ghosh Chowdhury, S and Das, Samar and Ravi Kumar, B and De, P K (2006) Twinning-induced sluggish evolution of texture during recrystallization in AISI 316L stainless steel after cold rolling. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials, 37 A (8). pp. 2349-2359.

Ghosh Chowdhury, S and Dutta, Abhijit and Ravi Kumar, B and Kumar, Amit (2006) Textural evolution during accumulative roll bonding of an Al–Li alloy. Materials Science and Engineering A, 428 (1-2). pp. 351-357.

Ghosh Chowdhury, S and Srivastava, V C and Ravi Kumar, B and Soren, S (2006) Evolution of texture during accumulative roll bonding (ARB) and its comparison with normal cold rolled aluminium–manganese alloy. Scripta Materialia, 54 (9). pp. 1691-1696.

Guria, Chandan and Varma, Mohan and Mehrotra, S P and Gupta, Santosh K (2006) Simultaneous optimization of the performance of flotation circuits and their simplification using the jumping gene adaptations of genetic algorithm-II: More complex problems. International Journal of Mineral Processing, 79 (3). pp. 149-166.

Humane, M M and Vaish, A K and Swaminathan, J and Ravi Kumar, B and De, P K and Peshwe, D R and Paretkar, R K (2006) Comparison of hot rolled textures in different grades of high formable steels. Steel Research International, 77 (6). pp. 445-449.

Jegannathan, S and Sankara Narayanan, T S N and Ravichandran, K and Rajeswari, S (2006) Evaluation of the corrosion resistance of phosphate coatings obtained by anodic electrochemical treatment. Progress in Organic Coatings, 57 (4). pp. 392-399.

Jegannathan, S and Sankara Narayanan, T S N and Ravichandran, K and Rajeswari, S (2006) Formation of zinc phosphate coating by anodic electrochemical treatment. Surface and Coatings Technology, 200 (20-21). pp. 6014-6021.

Jegannathan, S and Sankara Narayanan, T S N and Ravichandran, K and Rajeswari, S (2006) Formation of zinc–zinc phosphate composite coatings by cathodic electrochemical treatment. Surface and Coatings Technology, 200 (12-13). pp. 4117-4126.

Jha, Manis K and Upadhyay, R R and Lee, Jae-chun and Kumar, Vinay (2006) Recycling of zinc from textile effluent using ion-exchange process. Proceedings of Fall meetings and 28th conference . pp. 67-71.

Jindal, Vikas and De, P K and Venkateswarlu, K (2006) Effect of Al3Sc precipitates on the work hardening behavior of aluminum–scandium alloys. Materials Letters, 60 (28). pp. 3373-3375.

Jindal, Vikas and Srivastava, V C and Das, Arpan and Ghosh, R N (2006) Reactive diffusion in the roll bonded iron–aluminum system. Materials Letters, 60 (13-14). pp. 1758-1761.

Kailath, A J and Kumar, Arvind and Mitra, A (2006) Effect of metalloids on crystallization and magnetic behaviour of FeCoSiB based metallic glass. Bulletin of Material Science, 29 (2). pp. 127-131.

Kar, Abhijit and Mandal, Sudipta and Rathod, S and Ray, Ajoy K (2006) Effect of Ti diffusivity on the formation of phases in the interface of alumina-alumina brazed with 97(Ag40Cu)3Ti filler alloy. Brazing And Soldering, Proceedings . pp. 219-225.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2006) Electrodeposited Ni–B coatings: Formation and evaluation of hardness and wear resistance. Materials Chemistry and Physics, 99 (2-3). pp. 300-308.

Kumar, Manoj and Prasad, Sanjay and Ranganathan, S (2006) Kinetics of reduction of manganese ore under different flow rates of inert gas. Journal of Metallurgy and Materials Science, 48 (1). pp. 23-30.

Kumar, Sanjay and Bandopadhyay, A and Alex, T C and Kumar, Rakesh (2006) Influence of mechanical activation on the synthesis and hydraulic activity of calcium dialuminate. Ceramics International, 32 (5). pp. 555-560.

Kumar, Sanjay and Kumar, Rakesh and Bandopadhyay, A (2006) Innovative methodologies for the utilisation of wastes from metallurgical and allied industries. Resources Conservation and Recycling, 48 (4). pp. 301-314.

Kumar, Vinay and Bagchi, D and Pandey, B D (2006) Extraction of zinc-cobalt from sulphate solution of cobalt cake by D2EHPA in the processing of indian ocean nodules. Minerals Processing, 77 (5). pp. 299-304.

Kumari, S and Panda, A K and Mitra, A and Datta, J and Chattoraj, I (2006) Effect of hydrogen on the magnetic behavior of CoFeCrSiB amorphous. Journal of Materials Science, 41 (17). pp. 5510-5513.

Kumari, Seema and Chattoraj, I and Pal, S K and Mitra, A (2006) Study of Giant Magneto-Impedance Behavior in Co–Fe Based Amorphous/Nanocrystalline Materials. Materials and Manufacturing Processes, 21 . pp. 683-686.

Kumari, Seema and Chattoraj, I and Panda, A K and Mitra, A and Pal, S K (2006) Effect of Fe addition on the magnetic and giant magneto-impedance behaviour of CoCrSiB rapidly solidified alloys. Journal of Physics D: Applied Physics, 39 . pp. 2001-2006.

Kundu, Sukumar and Ghosh, M and Chatterjee, S (2006) Diffusion bonding of commercially pure titanium and 17-4 precipitation hardening stainless steel. Materials Science and Engineering A, 428 (1-2). pp. 18-23.

Lakshmipathiraj, P and Narasimhan, B R V and Prabhakar, S and Bhaskar Raju, G (2006) Adsorption of arsenate on synthetic goethite from aqueous solutions. Journal of Hazardous Materials, 136 (2). pp. 281-287.

Lakshmipathiraj, P and Narasimhan, B R V and Prabhakar, S and Bhaskar Raju, G (2006) Adsorption studies of arsenic on Mn-substituted iron oxyhydroxide. Journal of Colloid and Interface Science, 304 (2). pp. 317-322.

Mahere, Vishesh and Nigam, S P (2006) Identification of Isomorphism and Structural Properties of Kinematic chains with the help of Adjancency matrices. Journal of Metallurgy and Materials Science, 48 (1). pp. 31-44.

Maity, S K and Ballal, N B and Kawalla, R (2006) Development of ultrahigh strength steel by electroslag refining: Effect of inoculation of titanium on the microstructures and mechanical properties. ISIJ International, 46 (9). pp. 1361-1370.

Mishra, Suman K and Das, Swapan K and Pathak, L C (2006) Sintering behaviour of self-propagating high temperature synthesised ZrB2–Al2O3 composite powder. Materials Science and Engineering A, 426 (1-2). pp. 229-234.

Mishra, Suman K and Gaur, H and Rupa, P K P and Pathak, L C (2006) Deposition of nanostructured Si–C–N superhard coatings by rf magnetron sputtering. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures , 24 (3). pp. 1311-1317.

Mishra, Suman K and Rupa, P K P and Das, Swapan K and Shcherbakov, V (2006) Effect of alumina diluent on the fabrication of in-situ Al2O3-Ti/ZrB2 composite by self propagating high temperature synthesis dynamic compaction. Metallurgical and Materials Transactions B, 37 (1). pp. 641-647.

Mishra, Suman K and Rupa, P K P and Pathak, L C (2006) Nucleation and growth of DC magnetron sputtered titanium diboride thin films. Surface and Coatings Technology, 200 (12-13). pp. 4078-4081.

Mishra, T and Parida, K M (2006) Effect of sulfate on the surface and catalytic properties of iron–chromium mixed oxide pillared clay. Journal of Colloid and Interface Science, 301 (2). pp. 554-559.

Mishra, T and Tiwari, S K (2006) Studies on sorption properties of zeolite derived from Indian fly ash. Journal of Hazardous Materials, 137 (1). pp. 299-303.

Mohapatra, J N and Panda, A K and Gunjan, M K and Mitra, A (2006) Evaluation of ageing behavior in modified 9Cr-1Mo steel by magnetic barkhausen emission technique. Journal of Metallurgy and Materials Science, 48 (3). pp. 167-171.

Mohapatra, P and Mishra, T and Parida, K M (2006) Effect of microemulsion composition on textural and photocatalytic activity of titania nanomaterial. Applied Catalysis A: General, 310 . pp. 183-189.

Narasaiah, N and Tarafder, S and Ray, K K (2006) Technique for direct measurement of effective fatigue threshold of materials. Materials Science and Technology, 22 (5). pp. 547-552.

Nayar, S and Pramanick, A K and Sharma, Binay Kumar and Mishra, Rahul Kumar and Bansal, Satyendra Kumar and Prajapati, Amardeep and Sahu, K K and Das, Swapan K and Pathak, L C and Sinha, Arvind (2006) Hydroxyapatite coating on stainless steel pre-coated with bovine serum albumin at ambient conditions. Colloids and Surfaces B: Biointerfaces, 48 (2). pp. 183-187.

Nayar, S and Sinha, M K and Basu, D and Sinha, Arvind (2006) Synthesis and sintering of biomimetic hydroxyapatite nanoparticles for biomedical applications. Journal of Materials Science: Materials in Medicine, 17 (11). pp. 1063-1068.

Pal, J (2006) Thermodynamic analysis of nitrogen removal in EAF by DRI fines injection. Ironmaking & Steelmaking, 33 (6). pp. 466-470.

Pal, S K and Manik, N B and Mitra, A (2006) Dependence of frequency and amplitude of the ac current on the GMI properties of Co based amorphous wires. Materials Science and Engineering A, 415 (1-2). pp. 195-201.

Pal, S K and Manik, N B and Mitra, A (2006) Dependence of the driving current on the harmonic behavior of giant magneto-impedance voltage of Co-based amorphous wires. Journal of Magnetism and Magnetic Materials, 305 (1). pp. 240-246.

Pal, S K and Panda, A K and Vazquez, M and Mitra, A (2006) The effect of magnetoelastic interaction on the GMI behaviour of Fe-, Co- and Co–Fe-based amorphous wires. Journal of Materials Processing Technology, 172 (2). pp. 182-187.

Palit Sagar, S and Das, S and Parida, N and Bhattacharya, D K (2006) Non-linear ultrasonic technique to assess fatigue damage in structural steel. Scripta Materialia, 55 (2). pp. 199-202.

Palit Sagar, S and Das, S and Parida, N and Bhattacharya, D K (2006) Non-linear ultrasonic technique to assess fatigue damage in structural steel. Scripta Materialia, 55 (2). pp. 199-202.

Panda, A K and Das, Swapan K and Mitra, A and Jiles, D C and Lo, C C H (2006) Evaluation of deformation behavior of HSLA-100 steel using magnetic hysteresis technique. IEEE Transactions on Magnetics, 42 (10). pp. 3264-3266.

Panda, A K and Ghosh Chowdhury, S and Mitra, A and Nishiyama, N (2006) Electron transport behaviour and soft magnetic properties of bulk amorphous Fe72Si4B20Nb4 alloy. Journal of Physics D: Applied Physics, 39 . pp. 3536-3542.

Panda, E and Mazumdar, D and Mehrotra, S P (2006) Mathematical modeling of particle segregation during centrifugal casting of metal matrix composites. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science , 37 A (5). pp. 1675-1687.

Paria, S (2006) The mixing behavior of n-alkylpyridinium bromide-NP-9 mixed surfactant systems. Colloids And Surfaces A-Physicochemical And Engineering Aspects , 281 (1). pp. 113-118.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2006) Effect of fretting amplitude and frequency on the fretting corrosion behaviour of tin plated contacts. Surface and Coatings Technology, 201 (6). pp. 2181-2192.

Park, Y W and Sankara Narayanan, T S N and Lee, K Y (2006) Fretting wear behaviour of Tin plated contacts: Influence on contact resistance. Surface Review and Letters (srl), 13 (5). pp. 635-644.

Pathak, B C and Kumar, Arvind and Sahoo, K L and Talukdar, P (2006) Effect of Ni–Mg on the microstructure and properties of Al–(4–5)Fe–1V–1Si alloys. Materials Science and Engineering A, 433 (1-2). pp. 310-315.

Phuong, To Duy and Bach, Tran Ngoc and Park, Y H and Lee, Z H (2006) Effect of nitrogen and rare earth metals in duplex stain-less steel on transformation of ferrite-austenite structure. Journal of Metallurgy and Materials Science, 48 (1). pp. 13-21.

Prakash, S and Bhaskar Raju, G and Subba Rao, S (2006) Beneficiation of sillimanite by column flotation - a pilot scale study. International Journal of Mineral Processing, 81 (3). pp. 159-165.

Rao, A S and Gupta, K K and Singh, Manjit and Upadhyay, A K and Sircar, J K (2006) Interelemental interference correction by computational method in flame atomic absorption spectroscopy (FAAS): Study of Fe-Mn system in silico-manganese ferro-alloy. Indian Journal of Chemical Technology, 13 (1). pp. 77-80.

Rao, A S and Gupta, K K and Singh, Manjit and Upadhyay, A K and Sircar, J K (2006) Interelemental interference correction by computational method in flame atomic absorption spectroscopy (FAAS): Study of Fe-Mn system in silico-manganese ferro-alloy. Indian Journal Of Chemical Technology , 13 (1). pp. 77-80.

Rao, V V (2006) A modified gun technique for melt quenching of reactive alloys. Indian Journal Of Engineering And Materials Sciences , 13 (5). pp. 451-454.

Rao, V V (2006) A structural study of copper-43at% cadmium alloy. Indian Journal Of Engineering And Materials Sciences , 13 (6). pp. 531-534.

Ravi Kumar, B and Singh, A K and Mahato, B and De, P K and Bandopadhyay, N R and Bhattacharya, D K (2006) Deformation-induced transformation textures in metastable austenitic stainless steel. Materials Science and Engineering A, 429 (1-2). pp. 205-211.

Ray, Ashok K and Das, D K (2006) Accelerated creep resistance of thermal barrier coated superalloy. Materials Letters, 60 (25-26). pp. 3019-3022.

Ray, Ashok K and Goswami, B and Singh, M P and Das, D K and Roy, Nilima and Ravi Kumar, B and Dash, Byomkesh and Ray, Ajoy K and Das, Goutam and Rupa, P K P and Parida, N and Das, Arpan and Swaminathan, J and Dwarakadasa, E S (2006) Characterization of bond coat in a thermal barrier coated superalloy used in combustor liners of aero engines. Materials Characterization, 57 (3). pp. 199-209.

Ray, Ashok K and Roy, Nilima and Dash, Byomkesh and Das, D K and Ranganath, V R and Goswami, B and Singh, M P and Tiwari, Y N and Roy, P K and Das, H K and Sanyal, D and Dwarakadasa, E S (2006) High temperature mechanical properties of thermal barrier coated superalloy applied to combustor liner of aero engines. High Temperature Materials And Processes , 25 (3). pp. 109-119.

Ray, Ashok K and Singh, S R and Swaminathan, J and Roy, P K and Tiwari, Y N and Bose, S C and Ghosh, R N (2006) Structure property correlation study of a service exposed first stage turbine blade in a power plant. Materials Science and Engineering A, 419 (1-2). pp. 225-232.

Roy, Rajat K and Das, Siddhartha (2006) New combination of polishing and etching technique for revealing grain structure of an annealed aluminum (AA1235) alloy. New combination of polishing and etching technique for revealing grain structure of an annealed aluminum (AA1235) alloy, 41 . pp. 289-292.

Roy, Rajat K and Kar, Sujoy and Das, Karabi and Das, Siddhartha (2006) A study of precipitation and recrystallization behaviour of aluminium alloy AA1235. A study of precipitation and recrystallization behaviour of aluminium alloy AA1235, 41 . pp. 1039-1045.

Sahay, S K and Singh, S K and Goswami, B and Ray, A K (2006) Perspectives of innovation scenarios in Titanium base alloys - A review. Journal of Metallurgy and Materials Science, 48 (4). pp. 181-204.

Sahay, S K and Singh, S K and Goswami, B and Ray, Ashok K (2006) Studies of oxidation behavior in Ti-base alloys. Corrosion Reviews , 24 (5). pp. 353-394.

Sahay, S K and Singh, S K and Kumar, S B and Goswami, B and Ray, A K (2006) Recent developments in cobalt base alloys. Journal of Metallurgy and Materials Science, 48 (3). pp. 129-166.

Sahu, K K and Alex, T C and Mishra, D and Agrawal, A (2006) An overview on the production of pigment grade titania from titania-rich slag. Waste Management & Research, 24 (1). pp. 74-79.

Sahu, Ranjan K (2006) Effect of Mo doping on magnetic and transport properties of La0.5Sr0.5CoO3. Journal of Magnetism and Magnetic Materials, 305 (1). pp. 47-52.

Sahu, Ranjan K and Krishnan, P S R and Das, Arpan and Shinde, A B and Ramanasham, M (2006) Ru-induced spin rotation in La1.2Sr1.8Mn1.9Ru0.1O7 bilayered manganite. Journal of Magnetism and Magnetic Materials, 297 (2). pp. 84-87.

Sahu, Ranjan K and Ray, Ashok K and Das, Swapan K and Kailath, A J and Pathak, L C (2006) Microwave-assisted combustion synthesis of Ni powder using urea. Journal of Materials Research, 21 (7). pp. 1664-1673.

Sahu, S K and Sahu, K K and Pandey, B D (2006) Leaching of zinc sulfide concentrate from the ganesh-himal deposit of nepal. Metallurgical and Materials Transactions B, 37 (4). pp. 541-549.

Sankar, M and Batra, N K and Shekhar, R and Mehrotra, S P (2006) Roasting, reduction and leaching of an Indian ilmenite ore for producing synthetic rutile. Transactions Of The Indian Institute Of Metals , 59 (3). pp. 381-387.

Sankara Narayanan, T S N and Baskaran, Irusen and Krishnaveni, K and Parthiban, S (2006) Deposition of electroless Ni–P graded coatings and evaluation of their corrosion resistance. Surface and Coatings Technology, 200 (11). pp. 3438-3445.

Sankara Narayanan, T S N and Jegannathan, S and Ravichandran, K (2006) Corrosion resistance of phosphate coatings obtained by cathodic electrochemical treatment: Role of anode–graphite versus steel. Progress in Organic Coatings, 55 (4). pp. 355-362.

Sasikumar, C and Srikanth, S and Das, S K (2006) Analysis of premature failure of a tie bar in an injection molding machine. Engineering Failure Analysis, 13 (8). pp. 1246-1259.

Satendra, Kumar and Sankara Narayanan, T S N and Suresh Kumar, M and Manimaran, A (2006) Dezincification of Brass in Sulfide Polluted Sodium Chloride Medium: Evaluation of the Effectiveness of 2-Mercaptobenzothiazole. International Journal of Electrochemical Science, 1 (8). pp. 456-469.

Sawaguchi, Takahiro and Sahu, Puspendu and Kikuchi, Takehiko and Ogawa, Kazuyuki and Kajiwara, Setsuo and Kushibe, Atsumichi and Higashino, Masahiko and Ogawa, Takatoshi (2006) Vibration mitigation by the reversible fcc/hcp martensitic transformation during cyclic tension–compression loading of an Fe–Mn–Si-based shape memory alloy. Scripta Materialia, 54 (11). pp. 1885-1890.

Sen, S and Choudhary, R N P and Tarafder, A and Pramanik, P (2006) Impedance spectroscopy study of strontium modified lead zirconate titanate ceramics. Journal of Applied Physics , 99 (12). pp. 124114-124118.

Singh, D D N and Ghosh, Rita (2006) Electroless nickel–phosphorus coatings to protect steel reinforcement bars from chloride induced corrosion. Surface and Coatings Technology, 201 (1-2). pp. 90-101.

Singh, Raghuvir and Kurella, A and Dahotre, N B (2006) Laser Surface Modification of Ti–6Al–4V: Wear and Corrosion Characterization in Simulated Biofluid. Journal of Biomaterials Applications, 21 (1). pp. 49-73.

Sinha, Arvind and Kannde, D (2006) Self-assembly-assisted growth of two-dimensional Penrose tiling. Philosophical Magazine Letters Online ISSN 1362-3036, 86 (2). pp. 75-80.

Sircar, J K and Upadhyay, A K and Gupta, K K (2006) Determination of phosphorus in steel by precipitation as silverphosphate and subsequent determination by spectrophotometric method. Journal of Metallurgy and Materials Science, 47 (1). pp. 45-50.

Siruguri, V and Gutiérrez, J and Barandiaràn, J M and Làzpita, P and Singh, Brajendra and Sahu, Ranjan K and Sundar Manoharan, S and Henry, P and Mondelli, C (2006) Neutron diffraction evidence for double exchange coupling in Ru-substituted La0.6Pb0.4Mn1−xRuxO3, 0x0.5. Physica B: Condensed Matter, 385-386 (1). pp. 408-410.

Sivaprasad, S and Narang, S K and Singh, Raghubir (2006) Failure of high pressure ammonia line in a fertilizer plant – A case study. Engineering Failure Analysis, 13 (6). pp. 867-875.

Sivaprasad, S and Tarafder, S and Ranganath, V R and Tarafder, Mita and Ray, K K (2006) Corrosion fatigue crack growth behaviour of naval steels. Corrosion Science, 48 (8). pp. 1996-2013.

Srinivasan, A and Pillai, U T S and Swaminathan, J and Das, Swapan K and Pal, B C (2006) Observations of microstructural refinement in Mg–Al–Si alloys containing strontium. Journal of Materials Science, 41 (18). pp. 6087-6089.

Srinivasan, A and Pillai, U T S and Swaminathan, J and Pai, B C (2006) Enhanced high temperature properties of low pressure cast AZ91 Mg alloy. International Journal of Cast Metals Research, The, 19 (5). pp. 265-268.

Srivastava, A K and Srivastava, V C and Gloter, A and Ojha, S N (2006) Microstructural features induced by spray processing and hot extrusion of an Al–18% Si–5% Fe–1.5% Cu alloy. Acta Materialia, 54 (7). pp. 1741-1748.

Srivastava, V C and Ojha, S N (2006) Effect of aspiration and gas–melt configuration in close coupled nozzle on powder productivity. Powder Metallurgy, 49 (3). pp. 213-218.

Srivastava, V C and Sahoo, K L (2006) Metallic Foams : Current Status and Future Prospects. IIM Metal News, 9 (4). pp. 9-13.

Upadhyay, A K and Gupta, K K and Sircar, J K and Deb, M K and Mundhara, G L (2006) Heavy metals in freshly deposited sediments of the river Subernarekha, India: an example of lithogenic and anthropogenic effects. Environmental Geology, 50 (3). pp. 397-403.

Vaish, A K and Gupta, R C and Mehrotra, S P (2006) Thermodynamic and kinetic aspects of the smelting reduction of multimetallic Indian magnetite ore. Journal of Metallurgy and Materials Science, 48 (1). pp. 1-12.

Vaish, A K and Mehrotra, S P and Gupta, R C (2006) Thermodynamics and reduction kinetics of iron ore in direct reduction processes. Journal of Metallurgy and Materials Science, 48 (2). pp. 59-73.

Vaish, A K and Singh, S D and Humane, M M and Goswami, N G (2006) Woodchar - A sustainable reductant and renewable source of thermal energy for tribal iron making. Journal of Metallurgy and Materials Science, 48 (1). pp. 51-58.

Venkataraman, R and Das, Goutam and Venkataraman, B and Narashima, Rao and Krishnamurty, R (2006) Image processing and statistical analysis of microstructures of as plasma sprayed Alumina–13 wt.% Titania coatings. Surface and Coatings Technology, 201 (6). pp. 3691-3700.

Venkataraman, R and Krishnamurty, R (2006) Evaluation of fracture toughness of as plasma sprayed alumina-13 wt.% titania coatings by micro-indentation techniques. Journal of the European Ceramic Society, 26 (15). pp. 3075-3081.

Venkataraman, R and Parmanick, B and Ravi Kumar, B and Pathak, L C and Das, D K and Venkataraman, B (2006) The influence of substrate on partially rapidly solidified Alumina-3 wt % titania nanocrystalline coatings deposited by plasma spray technique. Surface Engineering for Manufacturing Applications , 890 . pp. 69-75.

Venkataraman, R and Ravi Kumar, B and Krishnamurty, R and Das, D K (2006) A study on phase stability observed in as sprayed Alumina-13 wt.% Titania coatings grown by detonation gun and plasma spraying on low alloy steel substrates. Surface and Coatings Technology, 201 (6). pp. 3087-3095.

Venkateswarlu, K and Das, Goutam and Pramanick, A K and Xu, Cheng and Langdon, T G (2006) Using ball-indentation to evaluate the properties of an ultrafine-grained Al–2% Si alloy processed by ECAP. Materials Science and Engineering A, 427 (1-2). pp. 188-194.

Venkateswarlu, K and Mohapatra, S and Rao, R G and Ray, Ajoy K and Pathak, L C and Mondal, D P (2006) High abrasive wear response of diamond reinforced composite coating: a factorial design approach. Tribology Letters, 24 (1). pp. 7-14.

Venkateswarlu, K and Ray, Ajoy K and Gunjan, M K and Mondal, D P and Pathak, L C (2006) Tribological wear behavior of diamond reinforced composite coating. Materials Science and Engineering A, 418 (1-2). pp. 357-363.

Vijaya Kumar , T V and Rao, D S and Bhaskar Raju, G and Prabhakar, S and Subba Rao, S (2006) Processing of iron ore fines by column flotation – Part I & part II. Minerals & Metals Review, June . pp. 48-51.

Book or NML Publication

Ray, K K and Narasaiah, N and Tarafder, S (2006) Comparative Assessment of Fatigue-Thresholds Estimated by Short and Long Cracks. In: Fracture of Nano and Engineering Materials and Structures. Proceedings of the 16th European Conference of Fracture, Alexandroupolis, Greece, July 3–7, 2006 (B.). Springer, Netherlands, pp. 221-222. ISBN 978-1-4020-4971-2 (Print) 978-1-4020-4972-9 (Online)

Tarafder, Mita and Dey, Swati and Sivaprasad, S and Tarafder, S (2006) A Novel Technique for Extracting Stretch Zone Features from Fractographs. In: Fracture of Nano and Engineering Materials and Structures. Proceedings of the 16th European Conference of Fracture, Alexandroupolis, Greece, July 3–7, 2006, B. ( 2T3). Springer, Netherlands, pp. 145-146. ISBN 978-1-4020-4971-2 (Print) 978-1-4020-4972-9 (Online)

Conference or Workshop Item

Bhattacharyya, P and Bhattacharyya, K K and Kumar, V and Nayak, B and Mohandas, P N and Vidyadhar, A and Swamy, Narayana and Chattoraj, U S and Maulik, S C (2006) Studies on Medium Grade Ilmenite-Depleted Beach Placer deposit of Chavakkad Ponnani Coast, Kerala. In: International Seminar on Mineral Processing Technology (MPT-2006), March 8-10, 2006, Chennai.

Das, S K and Godiwalla, K M and Mehrotra, S P (2006) A Mathematical Model to Characterize Volatile Matter Evolution during Carbonisation in Metallurgical Coke Ovens. In: International Symposium on Environment Friendly Technology in Mineral Processing and Metal Extraction (AETMME-2006), Nov, 2006, AETMME-2006.

Das, Suchandan K and Godiwalla, K M (2006) Heat transfer characterization in the mould of a high speed continuous steel slab caster. In: 18th National & 7th ISHMT-ASME Heat and Mass Transfer Conference, Jan, 2006, IIT Guwahati.

Das, Suchandan K and Godiwalla, K M and Hedge, Shubha S and Mehrotra, S P and De, P K (2006) A stochastic model for prediction of Erosion-oxidation interaction on boiler grade steel Surfaces. In: Proceedings of International Conference on Industrial Tribology – 2006, Nov 30-Dec 02, 2006, Indian Institute of Science, Bangalore, India.

Das, Suchandan K and Godiwalla, K M and Hegde, Shubha and Mehrotra, S P and Dey, P K (2006) A stochastic model for prediction of Erosion-oxidation interaction on boiler grade steel Surfaces. In: Proceedings of International Conference on Industrial Tribology – 2006, Nov 30-Dec 02, 2006, Indian Institute of Science, Bangalore, India.

Das, Suchandan K and Godiwalla, K M and Mehrotra, S P (2006) A mathematical model to characterize volatile matter evolution during carbonisation in metallurgical coke ovens. In: International Symposium on Environment Friendly Technnology in Mineral Processing & Metal Extraction (AETMME-2006), 1-3 November, 2006, Bhubaneswar, India.

Das, Suchandan K and Godiwalla, K M and Panda, Lopamudra and Bhattacharyya, K K and Singh, Ratnakar and Mehrotra, S P (2006) Mathematical modeling of separation behaviour of a spiral for washing high ash coal. In: International Symposium on Environment Friendly Technnology in Mineral Processing & Metal Extraction (AETMME-2006), 1-3 November, 2006, Bhubaneswar, India.

Das, Swapan K and Godiwalla, K M and Panda, Lopamudra and Bhattacharya, K K and Singh, Ratnakar and Mehrotra, S P (2006) Mathematical Modelling of Seperation Behaviour of a Spiral for Washing high ash Coal. In: International Symposium on Environment Friendly Technology in Mineral Processing and Metal Extraction (AETMME -2006), Nov, 2006, AETMME -2006.

Jha, Manis K and Kumar, Vinay and Bagchi, D and Singh, R J and Lee, Jae-chun (2006) Recycling of rayon industry effluent for the recovery and separation of Zn/Ca using Thiophosphinic extractant. In: Proceeding of spring meeting and 27th conference, May, 2006, KIGAM.

Mehrotra, S P and Kumar, Rakesh and Kumar, Sanjay (2006) Mechanical activation of solids in processing of minerals and wastes. In: Proceedings of the XXIII International Mineral Processing Congress, 3-8 Sept. 2006, Istanbul, Turkey.

Rao, K V and Vidyadhar, A (2006) Comparative Studies between Jigging and HMS for Lowering of Ash in a Coal Sample from Assam. In: International Seminar on Mineral Processing Technology (MPT-2006), March 8-10, 2006, Chennai.

Singh, Ratnakar and Banerjee , B and Bhattacharyya, K K and Srivastava, J P (2006) Upgradation of Barite waste to Marketable Grade Concentrate. In: Proceeding of the XXIII International Mineral Processing Congress, 2006, IMPC.

Singh, Ratnakar and Das, Avimanyu and Dey, Shobhana and Vidyadhar, A and Rath, R K and Bhattacharyya, K K (2006) Beneficiation of Indian Coking Coal Fines- An Alternate Circuit for Improved Performance. In: International Seminar on Mineral Processing Technology (MPT-2006), March 8-10, 2006, Chennai.

Swaminathan, J and Singh, Raghubir and Das, Swapan K and Das, Goutam (2006) Failure Analysis of Welded Reformer Tubes of a Fertilizer Unit. In: Proceeding of the International Conference & Exhibition on Pressure Vessels and Piping, 7-9, February 2006, Chennai.

Patent

EP2002000708620 (2006) Process for the recovery of nickel from spent catalyst. EP1488015B1.

Project Reports

Tarafder, Mita and Tarafder, S and Dash, Byomkesh and Dey, Swati and Sivaprasad, S and Das, Swapan K (2006) Modelling of Crack-tip Blunting using Finite Element Method (FEM) (GAP-0088). Grant in Aid (GAP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Video

Abhilash, and Mehta, K D and Pandey, B D (2006) Video on Operational COlumn Bioleaching of Uranium at 100kg scale at UCIL premises. [Video]