Items where Year is 2005

Annual Reports

Director, NML (2005) Annual Report 2004-2005. NML, Jamshedpur. ISBN 0972-4273

Article

Agrawal, A (2005) Effluent treatment and by-product recovery from the sludge of an alumina plant. Minerals Engineering, 18 (4). pp. 463-465.

Agrawal, A and Sahu, K K (2005) Influence of temperature on the exchange of alkaline earth and transition metals on iminodiacetate resin. Solvent Extraction and Ion Exchange, 23 (2). pp. 265-287.

Agrawal, A and Sahu, K K (2005) Potential utilisation of manganese nodule leach residue as a scavenger for cadmium from industrial effluents. Journal of Metallurgy and Materials Science, 47 (3). pp. 141-148.

Agrawal, A and Sahu, K K and Pandey, B D (2005) Systematic studies on adsorption of lead on sea nodule residues. Journal of Colloid and Interface Science, 281 (2). pp. 291-298.

Alphonsa, J and Tiwari, S K and Jhala, G and Rayjada, P A and Raole, P M and Mukherji, S (2005) Influence of alloying elements on the corrosion properties of steels during plasma nitriding process. Journal of Metallurgy and Materials Science, 47 (1). pp. 31-38.

Bhagat, R P and Vijaya Kumar, T V (2005) Study on removal of suspended particles and colour impurities from the paint effluent of an automotive industries by adsorption. Journal of Metallurgy and Materials Science, 47 (3). pp. 159-168.

Bhattacharjee, S and Chakravarty, S and Maity, S and Dureja, V and Gupta, K K (2005) Metal contents in the groundwater of Sahebgunj district, Jharkhand, India, with special reference to arsenic. Chemosphere, 58 (9). pp. 1203-1217.

Bhattacharjee, S and Gupta, K K and Chakravarty, S and Thakur, P and Bhattacharyya, G (2005) Separation of iron, nickel, and cobalt from sulphated leach liquor of low nickel lateritic oxide ore. Separation Science and Technology, 39 (2). pp. 413-429.

Bhattamishra, A K and De, P K and Mandhyan, A and Das, S K (2005) Localised corrosion of 2124SiCp composite. Journal of Metallurgy and Materials Science, 47 (4). pp. 215-222.

Chakraborty, Dolly and Ranganathan, S and Sinha, S N (2005) Investigations on the carbothermic reduction of chromite ores. Metallurgical and Materials Transactions B, 36 (4). pp. 437-444.

Chaudhury, S K and Singh, A K and Sivaramakrishnan, C S and Panigrahi, S C (2005) Effect of processing parameters on physical properties of spray formed and stir cast Al–2Mg–TiO2 composites. Materials Science and Engineering A, 393 (1-2). pp. 196-203.

Chaudhury, S K and Singh, A K and Sivaramakrishnan, C S and Panigrahi, S C (2005) Wear and friction behavior of spray formed and stir cast Al–2Mg–11TiO2 composites. Wear, 258 (5-6). pp. 759-767.

Das, G S and Khanna, A S (2005) Role of corrosion product on the protectiveness of corrosion layers for microalloyed pipline steel. Journal of Metallurgy and Materials Science, 47 (1). pp. 39-44.

Das, Goutam and Ghosh, Sabita and Ghosh, Sukomal and Ghosh, R N (2005) Materials characterization and classification on the basis of materials pile-up surrounding the indentation. Materials Science and Engineering A, 408 (1-2). pp. 158-164.

Das, Goutam and Ghosh, Sabita and Sahay, S K (2005) Use of ball indentation technique to determine the change of tensile properties of SS316L steel due to cold rolling. Materials Letters, 59 (18). pp. 2246-2251.

Das, N N and Pattanaik, Pragyan and Das, Rita (2005) Defluoridation of drinking water using activated titanium rich bauxite. Journal of Colloid and Interface Science, 292 (1). pp. 1-10.

Das, Suchandan K and Godiwalla, K M and Mehrotra, S P and Chatterjee, Amit and Krishnan, S H and Choudhary, P C (2005) Mathematical modelling of volatile matter evolution during carbonisation in metallurgical coke ovens. High Temperature Materials And Processes , 24 (5). pp. 301-314.

Deb, Arnab and Sarma, Deepankar and Banerjee, M K (2005) Current attenuation test (Cat) survey for impressed current cathodic protection service for underground crude oil pipelines. Journal of Metallurgy and Materials Science, 47 (4). pp. 207-214.

Deb, Arnab and Sarma, Deepankar and Banerjee, M K (2005) Significance of logarithmic averaging of soil resistivity data for underground piplines using impressed current cathodic protection system. Journal of Metallurgy and Materials Science, 47 (3). pp. 169-176.

Dey, Shobhana (2005) Flotation responses of Gondwana coal in release analysis. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 114 (4). pp. 248-254.

Dey, Shobhana and Pathak, P N (2005) Comparative studies of amenability to processing of Graphite from different sources. Transactions of the Indian Institute of Metals, 58 (5). pp. 905-910.

Ghosh, Arindam and Chatterjee, S and Mishra, B and Das, Samar (2005) Microstructure, properties, and age hardening behavior of a thermomechanically processed ultralow-carbon cu-bearing high-strength steel. Metallurgical and Materials Transactions A, 36 (3). pp. 703-713.

Ghosh, Arindam and Das, Samar and Chatterjee, S (2005) Ultrahigh strength hot rotted microalloyed steel: microstructure and properties. Materials Science and Technology, 21 (3). pp. 325-333.

Ghosh, Arindam and Mishra, B and Das, Samar and Chatterjee, S (2005) Structure and properties of a low carbon Cu bearing high strength steel. Materials Science and Engineering A, 396 (1-2). pp. 320-332.

Ghosh, M and Chatterjee, S (2005) Effect of interface microstructure on the bond strength of the diffusion welded joints between titanium and stainless steel. Materials Characterization, 54 (4-5). pp. 327-337.

Ghosh, M and Das, Samar and Banarjee, P S and Chatterjee, S (2005) Variation in the reaction zone and its effects on the strength of diffusion bonded titanium–stainless steel couple. Materials Science and Engineering A, 390 (1-2). pp. 217-226.

Ghosh Chowdhury, S (2005) Development of texture during cold rolling in AA5182 alloy. Scripta Materialia, 52 (2). pp. 99-105.

Ghosh Chowdhury, S and Das, Samar and De, P K (2005) Cold rolling behaviour and textural evolution in AISI 316L austenitic stainless steel. Acta Materialia, 53 (14). pp. 3951-3959.

Ghosh Chowdhury, S and Ray, R K (2005) Violation of Schmid's law and tension-compression asymmetry in L1(2) structured alloys: role of ordered structure. Materials Science and Technology, 21 (2). pp. 211-217.

Guria, Chandan and Verma, Mohan and Gupta, Santosh K and Mehrotra, S P (2005) Simultaneous optimization of the performance of flotation circuits and their simplification using the jumping gene adaptations of genetic algorithm. International Journal of Mineral Processing, 77 (3). pp. 165-185.

Guria, Chandan and Verma, Mohan and Mehrotra, S P and Gupta, Santosh K (2005) Multi-objective optimal synthesis and design of froth flotation circuits for mineral Processing, using the jumping gene adaptation of genetic algorithm. Industrial & Engineering Chemistry Research, 44 (8). pp. 2621-2633.

Harmain, G A (2005) An investigation on single overload fatigue crack growth retardation, Part-2(Crack closure decomposition). Journal of Metallurgy and Materials Science, 47 (4). pp. 189-197.

Harmain, G A (2005) An investigation on single overload fatigue crack growth retardation, Part-I (Plasticity zone interactions). Journal of Metallurgy and Materials Science, 47 (3). pp. 129-140.

Harmain, G A (2005) A numerical investigation on constant amplitude loading. Journal of Metallurgy and Materials Science, 47 (2). pp. 103-117.

Jegannathan, S and Sankara Narayanan, T S N and Ravichandran, K and Rajeswari, S (2005) Performance of zinc phosphate coatings obtained by cathodic electrochemical treatment in accelerated corrosion tests. Electrochimica Acta, 51 (2). pp. 247-256.

Jha, Manis K and Kumar, Vinay (2005) Recovery of zinc from aqueous solutions by ion exchange process - A review. Journal of Metallurgy and Materials Science, 47 (3). pp. 119-128.

Jha, Manis K and Kumar, Vinay and Maharaj, L and Singh, R J (2005) Extraction and separation of Zn and Ca from solution using thiophosphinic extractant. Journal of Metallurgy and Materials Science, 47 (2). pp. 71-83.

Jha, Manis K and Upadhyay, A K and Bagchi, D and Kumar, Vinay (2005) Recovery of zinc from electroplating effluent using cationic resins. Journal of Metallurgy and Materials Science, 47 (4). pp. 177-187.

Khanra, A K and Godkhindi, M M and Pathak, L C (2005) Comparative studies on sintering behavior of self-propagating high-temperature synthesized ultra-fine titanium diboride powder. Journal of the American Ceramic Society, 88 (6). pp. 1619-1621.

Khanra, A K and Pathak, L C and Mishra, Suman K and Godkhindi, M M (2005) Sintering of ultrafine zirconium diboride powder prepared by modified SHS technique. Advances in Applied Ceramics: Structural, Functional and Bioceramics Journal - Advances in Psychiatric Treatment, 104 (6). pp. 282-284.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2005) Electroless Ni–B coatings: preparation and evaluation of hardness and wear resistance. Surface and Coatings Technology, 190 (1). pp. 115-121.

Kumar, Manoj and Ranganathan, S and Sinha, S N (2005) Reduction of manganese ores - A comparative study. Journal of Metallurgy and Materials Science, 47 (3). pp. 149-157.

Kumar, Rakesh and Kumar, Sanjay and Badjena, S and Mehrotra, S P (2005) Hydration of mechanically activated granulated blast furnace slag. Metallurgical and Materials Transactions B, 36 (6). pp. 873-883.

Kundu, Sukumar and Ghosh, M and Laik, A and Bhanumurthy, K and Kale, G B and Chatterjee, S (2005) Diffusion bonding of commercially pure titanium to 304 stainless steel using copper interlayer. Materials Science and Engineering A, 407 (1-2). pp. 154-160.

Mahato, D K and Chaudhary, R K and Srivastava, S C (2005) Dielectric behaviour of spray dried Pb0.98(La1−x/3Nax)0.02(Zr0.53Ti0.47)0.9950O3 system. Journal of Materials Science, 40 (2). pp. 381-386.

Maity, S and Chakravarty, S and Bhattacharjee, S and Roy, B C (2005) A study on arsenic adsorption on polymetallic sea nodule in aqueous medium. Water Research, 39 (12). pp. 2579-2590.

Mishra, Suman K and Das, Swapan K (2005) Sintering and microstructural behaviour of SHS produced zirconium diboride powder with the addition of C and TiC. Materials Letters, 59 (27). pp. 3467-3470.

Mishra, Suman K and Pathak, L C (2005) Deposition of crystalline C–N film by arc evaporation process. Materials Letters, 59 (27). pp. 3481-3484.

Mitra, A and Panda, A K (2005) Development of nanocrystalline materials for soft-magnetic applications. Transactions of Indian Institute of Metals, 58 (6). pp. 981-991.

Mohapatra, B K and Nayak, B (2005) Petrology of Mn carbonate–silicate rocks from the Gangpur Group, India. Journal of Asian Earth Sciences, 25 (5). pp. 773-780.

Murugananthan, M and Bhaskar Raju, G and Prabhakar, S (2005) Removal of tannins and polyhydroxy phenols by electro-chemical techniques. JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY , 80 (10). pp. 1188-1197.

Narasaiah, N and Chakraborti, P C and Maiti, R and Ray, K K (2005) Fatigue Crack Initiation in an Interstitial Free Steel. ISIJ International, 45 (1). pp. 127-132.

Narasaiah, N and Ray, K K (2005) Small crack formation in a low carbon steel with banded ferrite–pearlite structure. Materials Science and Engineering A, 392 (1-2). pp. 269-277.

Nayak, B R and Mohapatra, B K (2005) Morpho-chemistry of hematite in manganese-rich formation of Gangpur Group, Orissa. Journal of the Geological Society of India, 66 (4). pp. 486-490.

Pal, J and Goswami, M C and Goel, R P (2005) Some Thermodynamic and Kinetic Aspects of Nitrogen Removal in Arc Furnace Steel Melting. Indian Foundry Journal, 51 (6). pp. 33-40.

Palit Sagar, S and Parida, N and Das, S and Dobmann, G and Bhattacharya, D K (2005) Magnetic Barkhausen emission to evaluate fatigue damage in a low carbon structural steel. International Journal of Fatigue, 27 (3). pp. 317-322.

Palit Sagar, S and Parida, N and Das, Samar and Dobmann, G and Bhattacharya, D K (2005) Magnetic Barkhausen emission to evaluate fatigue damage in a low carbon structural steel. International Journal of Fatigue, 27 (3). pp. 317-322.

Palit Sagar, S and Ravi Kumar, B and Dobmann, G and Bhattacharya, D K (2005) Magnetic characterization of cold rolled and aged AISI 304 stainless steel. NDT & E International, 38 (8). pp. 674-681.

Panda, A K and Kumari, S and Chattoraj, I and Svec, P and Mitra, A (2005) Effect of Fe addition on the crystallization behaviour and Curie temperature of CoCrSiB-based amorphous alloys. Philosophical Magazine, 85 (7). pp. 1835-1845.

Panda, A K and Manimaran, A and Basu, S and Mitra, A and Chattoraj, I (2005) Effect of structural evolution and surface morphological changes on the electrochemical response of an FeNbAlMnCuSiB alloy. Journal of Materials Science, 40 (17). pp. 4579-4584.

Pathak, L C and Mishra, Suman K (2005) A review on the synthesis of Y-Ba-Cu-oxide powder. SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 18 (9). R 67-R 89.

Phuong, To Duy and Chien, Pham Tien and Binh, Hoang Thi and Linh, Do Chi (2005) The effect of phase composition and microstructure of 25Cr-6Ni-3Mo-0.25N duplex stainless steel on corrosion resistance. Journal of Metallurgy and Materials Science, 47 (1). pp. 15-23.

Prabhakar, S and Hanumantha Rao, K and Forsling, Willis (2005) Dissolution of wollastonite and its flotation and surface interactions with tallow-1,3-diaminopropane (duomeen T). Minerals Engineering, 18 . pp. 691-700.

Prabhakar, S and Rao, K Hanumantha and Fodor, W (2005) Dissolution of wollastonite and its flotation and surface interactions with tallow-1,3-diaminopropane (duomeen T. Minerals Engineering, 18 (7). pp. 691-700.

Prakash, S and Mukherjee, K and Mehrotra, S P (2005) Cold model study of metal droplet descent through fluids including a treatment of the non-Newtonian behaviour as exhibited by molten stag system. Ironmaking & Steelmaking, 32 (6). pp. 494-502.

Quraishi, M A and Jamal , D (2005) Inhibition of metals corrosion by a new vapour phase corrosion inhibitor. Journal of Metallurgy and Materials Science, 47 (1). pp. 45-50.

Ranganathan, S and Mishra, S N and Mishra, R and Singh, B K (2005) Control of silicon in high carbon ferrochromium produced in submerged arc furnace through redistribution of quartzite in the charge bed. Ironmaking & Steelmaking, 32 (2). pp. 177-184.

Rao, D S and Subba Rao, S and Vijaya Kumar, T V and Reddy, P S R and Bhaskar Raju, G and Prabhakar, S and More, P (2005) Beneficiation of iron ore fines by conventional flotation, flotation column and dual extraction column – A pilot scale study. Powder Handling & Processing, 17 (2). pp. 88-93.

Rao, D S and Vijaya Kumar, T V and Bhaskar Raju, G and Prabhakar, S and Ghosh, T K (2005) Alteration characteristics of illmenites from south India. Journal of Minerals and Materials Characterization and Engineering, 4 (1). pp. 47-59.

Rao, D S and Vijaya Kumar, T V and Subba Rao, S and Bhaskar Raju, G and Prabhakar, S (2005) Alteration characteristics of manavalakurichi beach placer illmenite, Tamilnadu. Journal of Applied Geochemistry, 7 (2). pp. 195-200.

Ravi Kumar, B and Mahato, B and Bandopadhyay, N R and Bhattacharya, D K (2005) Comparison of rolling texture in low and medium stacking fault energy austenitic stainless steels. Materials Science and Engineering A, 394 (1-2). pp. 296-301.

Ravi Kumar, B and Mahato, B and Bandopadhyay, N R and Bhattacharya, D K (2005) Influence of strain-induced phase transformation on the surface crystallographic texture in cold-rolled-and-aged austenitic stainless steel. Metallurgical and Materials Transactions A, 36 (11). pp. 3165-3174.

Ravi Kumar, B and Singh, Raghuvir and Mahato, B and De, P K and Bandopadhyay, N R and Bhattacharya, D K (2005) Effect of texture on corrosion behavior of AISI 304L stainless steel. Materials Characterization, 54 (2). pp. 141-147.

Ray, Ashok K and Das, D K and Venkataraman, B and Roy , P K and Goswami, B and Roy, Nilima and Das, S K and Parida, N and Tarafder, S and Chaudhuri, S and Sahay, S K and Ghosh, R N (2005) Characterization of rupture and fatigue resistance of TBC superalloy for combustion liners. Materials Science and Engineering A, 405 (1-2). pp. 194-200.

Ray, Ashok K and Mondal, S and Das, Swapan K and Ramachandrarao, P (2005) Bamboo—A functionally graded composite-correlation between microstructure and mechanical strength. Journal of Materials Science, 40 (19). pp. 5249-5253.

Ray, Ashok K and Singh, S R and Kailath, A J and Roy, P K and Das, Swapan K and Ghosh, R N (2005) Fatigue and creep damage and its correlation with microstructure of a service exposed first stage turbine blade in a power plant. Journal of Metallurgy and Materials Science, 47 (2). pp. 59-69.

Roy, Rajat K and Kar, Sujoy and Das, Karabi and Das, Siddhartha (2005) Microstructures and tensile properties of commercial purity aluminium alloy AA1235 under different annealing conditions. Materials Letters, 59 . pp. 2418-2422.

Sahay, S K and Singh, S K and Goswami, B and Ray, Ashok K (2005) Studies of phase transformations in Ti-Al-X alloys. HIGH TEMPERATURE MATERIALS AND PROCESSES , 24 (6). pp. 345-358.

Sahoo, K L and Mitra, A and Ghosh, S (2005) Effect of rare-earth Elements on Nanophase Evolution, Crystallization Behaviour and Mechanical Properties in Al-Ni-R (R = La/Mischmetal) Amorphous Alloys. Pramana - journal of physics, 65 (4). pp. 745-751.

Sahoo, K L and Stone, I C (2005) Effect of Si on the formation and stability of the icosahedral quasicrystalline phase in Al-Fe-Cr-Ti alloys. Philosophical Magazine Letters Online ISSN 1362-3036, 85 (5). pp. 231-245.

Sahoo, K L and Wollgarten, M and Haug, J and Banhart, J (2005) Effect of La on the crystallization behaviour of amorphous Al94 − xNi6Lax (x = 4–7) alloys. Acta Materialia, 53 (14). pp. 3861-3870.

Sahoo, K L and Wollgarten, M and Kim, K B and Banhart, J (2005) Crystallization behavior and microhardness evolution in Al92-xNi8Lax amorphous alloys. Journal of Materials Research, 20 (11). pp. 2927-2933.

Sahu, A Kumar and Panda, P K (2005) Ceramic coatings on metals prepared by sol-gel technique for corrosion resistance study. Journal of Metallurgy and Materials Science, 47 (1). pp. 25-29.

Sahu, K K and Agrawal, A and Pandey, B D (2005) Nickel recovery from spent nickel catalyst. Waste Management & Research, 23 (2). pp. 148-154.

Saleem, Sheikh shahid and Nigam, S P (2005) Noise prediction model for Indian traffic conditions using L10 approach. Journal of Metallurgy and Materials Science, 47 (2). pp. 91-101.

Sankara Narayanan, T S N (2005) Surface pretreatment by phosphate conversion coatings - A review. Reviews on Advanced Materials Science, 9 (2). pp. 130-177.

Sankara Narayanan, T S N (2005) Surface pretretament by phosphate conversion coatings - A review. Reviews in Advanced Materials Science, 9 . pp. 130-177.

Shaik, Abdul azees and Pal, Saumit and Jha, Rajeev (2005) Briquetting : A new approach to recycle the waste iron-bearing materials generated in steel plants. Journal of Metallurgy and Materials Science, 47 (4). pp. 199-206.

Singh, D D N and Ghosh, Rita (2005) Unexpected deterioration of fusion-bonded epoxy-coated rebars embedded in chloride-contaminated concrete environments. Corrosion Science, 61 (8). pp. 815-829.

Singh, Raghuvir and Dahotre, N B (2005) Tribology of laser modified surface of stainless steel in physiological solution. Journal of Materials Science, 40 . pp. 5619-5626.

Singh, Raghuvir and Martin, M and Dahotre, N B (2005) Influence of laser surface modification on corrosion behavior of stainless steel 316L and Ti-6Al-4V in simulated biofluid. Surface Engineering, 21 (4). pp. 297-306.

Singh, Raghuvir and Swaminathan, J and Das, Swapan K and Ravi Kumar, B and Chattoraj, I (2005) Effects of Cold Deformation Prior to Sensitization on Intergranular Stress Corrosion Cracking of Stainless Steel. Corrosion, 61 (9). pp. 907-916.

Singh, Ratnakar and Goswami, M C and Vaish, A K and Das, S K and Goel , R P (2005) NML's Contribution to Development of Indian Steel Industry. Motif . pp. 1-4.

Sinha, Arvind and Nayar, S (2005) Design and synthesis of nanosized bioceramic-particles, composites and coating. Transactions Of The Indian Institute Of Metals , 58 (6). pp. 951-955.

Sinha, Arvind and Nayar, S and Nath, B K and Das, D and Mukhopadhyay, P K (2005) Magnetic field induced synthesis and self-assembly of super paramagnetic particles in a protein matrix. Colloids and Surfaces B: Biointerfaces, 43 (1). pp. 7-11.

Sinha, I and De, P K and Srivastava, V C (2005) Mechanical working of 2124 Al alloy—SiCp cast composites. Journal of Materials Science, 40 (22). pp. 6045-6048.

Srikanth, S and Ray, Ajoy K and Bandopadhyay, A and Ravi Kumar, B and Jha, Animesh (2005) Phase constitution during sintering of red mud and red mud–fly ash mixtures. Journal of the American Ceramic Society, 88 (9). pp. 2396-2401.

Srikanth, S and Sankara Narayanan, T S N and Gopalakrishna, K and Narasimhan, B R V (2005) Corrosion in a buried pressurised water pipeline. Engineering Failure Analysis, 12 (4). pp. 634-651.

Srivastava, V C and Ojha, S N (2005) Microstructure and electrical conductivity of Al-SiCp composites produced by spray forming process. Bulletin of Materials Science, 28 (2). pp. 125-130.

Srivastava, V C and Scheider, A and Uhlenwinkel, V and Bauckhage, K (2005) Spray processing of 2014-Al + SiCP composites and their property evaluation. Materials Science and Engineering A, 412 (1-2). pp. 19-26.

Subramania, A and Angayarkanni, N and Sathiyapriya, A R and Vasudevan, T (2005) Synthesis and electrochemical characterization of nano-crystalline LiCoO2 powder by a novel sol-gel thermolysis process for Li-ion batteries. Journal of Metallurgy and Materials Science, 47 (2). pp. 85-90.

Sundaresan, S and Albert, S K and Sireesha, M and Swaminathan, J and Kamaraj, M (2005) Stress rutpure behavior of transition joints between modified Kr-Mo steel and 316 L(N) SS. Transactions Of The Indian Institute Of Metals , 58 (2-3). pp. 493-499.

Tarafder, Mita and Dey, Swati and Sivaprasad, S and Tarafder, S and Nasipuri, M (2005) Stretch-zone analysis by image processing for the evaluation of initiation fracture toughness of a HSLA steel. Zeitschrift für Metallkunde, 96 (8). pp. 924-932.

Vaish, A K and Singh, S D and Minj, R K and Humane, M M (2005) Need to exploit Indian ilmenite for commercial production of titanium sponge by carbo-chlorination process. Journal of Metallurgy and Materials Science, 47 (4). pp. 223-227.

Vijaya Kumar, T V and Prabhakar, S and Bhaskar Raju, G and Rao, D S and Subba Rao, S and More, P (2005) Semicommercial scale studies using flotation column and dual extraction column on iron ores of Goa, India. Journal of Minerals and Materials characterization and Engineering, 4 (2). pp. 113-124.

Book or NML Publication

Kumar, Rakesh and Alex, T C and Khan, Z H and Mahapatra, S P and Mehrotra, S P (2005) Mechanical activation of bauxite - €”potential and prospects in the Bayer process. In: LIGHT METALS 2005. TMS (The Minerals, Metals and Materials Society), pp. 77-9. ISBN 0873395808, 9780873395809

Conference or Workshop Item

Agrawal, A and Sahu, K K (2005) Detoxification of cadmium from industrial effluents using solid waste generated after sea nodule processing. In: Proceedings of the Sixth (2005) ISOPE Ocean Mining Symposium, 2005, ISOPE Ocean Mining Symposium.

Bandopadhyay, A and Goswami, M C and Kumar, Sanjay (2005) Improvement of environmental performance of integrated steel sector through process integration & optimisation measures and innovative waste management practices. In: Emomami-2005, 2005, IATES, Bhubaneswar.

Bhaskar Raju, G and Prabhakar, S and Mehrotra, S P and Vora, S B (2005) Circuit simplification by adopting flotation columns. In: Emerging Trends in Mineral Processing and Extractive Metallurgy, 13-14 June, 2005, Bhubaneswar.

Bhattacharrya, P and Nayak, B and Singh, R and Maulik, S C (2005) Studies on Beach Placers of Kerala Coast. In: International Seminar on Mineral Processing Technology (MPT-2005), January 6-8, 2005, Dhanbad.

Das, Chitrangada and Mehta, K D and Pandey, B D (2005) Biochemical Leaching of Metals from Indian Ocean Nodules. In: International Seminar on Mineral Processing Technology - (MPT-2005), January 6-8, 2005, Indian School of Mines, Dhanbad.

Das, Suchandan K and Godiwalla, K M and Panda, Emila (2005) High speed continuous slab casting of steel _Prospects and pitfalls. In: International Conference on Continuous casting - Past, Present and Future, October 24-25, 2005, Jamshedpur.

Dhanalakshmi, S and Sivakumar, P and Balasubramanian, M (2005) Influence of Processing Parameters in Sicp - Aluminium Alloy Composite Produced by Stir Casting Method. In: International Conference on Emerging Trends in Mineral Processing and Extractive Metallurgy, June 13-14, 2005, Regional Research Laboratory(CSIR) Bhubaneswar, Orissa.

Jana, R K and Randhawa, N S and Pal, J and Minj, R K and Godiwalla, K M (2005) Recovery of manganese as ferro-silico-manganese alloy from leached sea nodule residue. In: National Seminar on Polymetallic Nodule, 29-30th September 2005, Bhubaneswar.

Kumar, Vinay and Pandey, B D and Agrawal, A and Bagchi, D and Kumari, S and Sahu, S K (2005) Value addition in the processing of copper bleed solution by solvent extraction process. In: Proceedings of the International solvent extraction conference, 2005.

Kumari, Sarita and Agrawal, A and Bagchi , D and Kumar, Vinay and Pandey, B D (2005) Producing Copper Powder from Copper Bleed Solution by Hydrogen Reduction. In: International Conference on Emerging Trends in Mineral Processing and Extractive Metallurgy (ICME-2005), June 13-14, 2005, Regional Research Laboratory(CSIR) Bhubaneswar, Orissa.

Maulik, S C and Bhattacharyya, K K (2005) Beneficiation of Low Grade Chromite Ores from Sukinda. In: International Seminar on Mineral Processing Technology - (MPT-2005), January 6-8, 2005, Dhanbad.

Pal, S C and Mehta, K D and Pandey, B D and Mankhand, T R (2005) Biomineral Processing for Extraction of Copper Metal from Lean Ore of Malanjkhand Copper Project. In: International Conference on Emerging Trends in Mineral Processing and Extractive Metallurgy (ICME - 2005), June 13-14, 2005, Regional Research Laboratory(CSIR) Bhubaneswar, Orissa.

Ranganathan, S (2005) How the Ferro Alloys Industries Can Benefits From Innovation in the Laboratory. In: Seminar on Ferro alloys and stainless steel - Opportunities, prospects & challenges, 30 Sept and 1 Oct, 2005, Bhubaneswar, India.

Rao, D S and Vijaya Kumar, T V and Rao, S Subba and Prabhakar, S and Bhaskar Raju, G (2005) Characterization of Srikurmum and Navaladi Beach Placer Minerals. In: International Seminar on Mineral Processing Technology - (MPT 2005), January 6-8, 2005, Dhanbad.

Sharma, Hemant and Chauhan, Ravi and Srivastava, V C (2005) Development of Ultra High Strength and Nanocrystalline Materials by Accumulative Roll Bonding. In: International Conference on Materials Science and Technology(MS&T05) (American Society of Metals), September 27-30, 2005, Pittsburgh, Pensylvania.

Singh, D D N and Ghosh, Rita (2005) Protective Coatings for Steel Bars in Reinforced Structures. In: 3' International Symposium on Surface Protective Coatings, November, 14-16, NML, Jamshedpur.

Singh, Ratnakar and Sinha, S N (2005) Influence of Operating Variables on Flotation of High Ash Coking. In: International Seminar on Mineral Processing Technology(MPT-2005), January 6-8, 2005, Indian School of Mines, Dhanbad.

Srivastava, V C and Maheshwari, P and Kumar, N (2005) Preparation and Characterization of Aluminium Alloy Based Quasicrystal Reinforced Composites. In: EURO PM2005 : Powder Metallurgy Congress & Exhibitition, October 2-5, 2005, Prague, Czech Republic.

Vijaya Kumar, T V and Rao, D S and Rao, S Subba and Bhaskar Raju, G and Prabhakar, S (2005) Beneficiation of a Low Grade Limestone by Flotation Column. In: International Seminar on Mineral Processing Technology(MPT-2005), January 6-8, 2005, Indian School of Mines, Dhanbad.

Patent

US2003000393398 (2005) Process for the production of zirconium boride powder. US6908599.