Items where Year is 2003

Group by: Creators | Item Type | No Grouping

Number of items: 153.

Annual Reports

Goswami, N G (2003) Annual Report 2002-2003. NML, Jamshedpur. ISBN 0972-4273

Article

Agrawal, A and Sahu, K K and Rawat, J P (2003) Kinetic studies on the exchange of bivalent metal ions on amberlite IRC-718-an iminodiacetate resin. Solvent Extraction and Ion Exchange, 21 (5). pp. 763-782.

Bahadur, Aruna (2003) Enhancement of high temperature strength and room temperature ductility of iron aluminides by alloying. Materials Science and Technology, 19 (12). pp. 1627-1634.

Bahadur, Aruna and Ravi Kumar, B and Ghosh Chowdhury, S (2003) Effect of Thermomechanical Treatment on X-Ray Elastic Constants and Residual Stresses in HSLA-100 Steel. Journal of Nondestructive Evaluation, 22 (2). pp. 53-62.

Balaraju, J N and Narayanan, TSNS and Seshadri, S K (2003) Electroless Ni-P composite coatings. Journal of Applied Electrochemistry, 33 (9). pp. 807-816.

Balaraju, J N and Sankara Narayanan, T S N and Seshadri, S K (2003) Electroless Ni–P composite coatings. Journal of Applied Electrochemistry, 33 (9). pp. 807-816.

Bandyopadhyay, D and Singh, S D and Sanyal, D and Singh, K N (2003) A study on dissolution kinetics of carbon in liquid iron bath. Chemical Engineering Journal, 94 (2). pp. 79-92.

Bhagat, A N and Pabi, S K and Ranganathan, S and Mohanty, O N (2003) Aging Behaviour in Copper Bearing High Low Alloy Steels. ISIJ International, 44 (01). pp. 115-122.

Bhagat, A N and Ranganathan, S and Mohanty, O N (2003) Electrical resistivity studies in low carbon and HSLA-100 steels. Materials Science and Technology, 19 (3). pp. 343-346.

Bhattacharjee, S and Bhattacharyya, G and Mitra, A (2003) Chronological development of heavy metal accumulation research in earthworms - A review. Journal of Metallurgy and materials Science, 45 (1). pp. 19-37.

Bhattacharjee, S and Chakrabarty, S and Maity, S and Kar, S and Thakur, P and Bhattacharyya, G (2003) Removal of lead from contaminated water bodies using sea nodule as an adsorbent. Water Research, 37 (16). pp. 3954-3966.

Bhattacharya, D K (2003) NDT for residual life assessment in Indian industry. Insight, 45 (1). pp. 31-40.

Biswas, D K and Ashana, S R and Rau, V G (2003) Some studies on energy savings in sponge iron plants. Journal Of Energy Resources Technology-Transactions Of The, 125 (3). pp. 228-237.

Chakraborty, Dolly and Ranganathan, S and Sinha, S N (2003) Kinetics of reduction of chromium in chromite ore. Transactions Of The Indian Institute Of Metals , 56 (4). pp. 335-339.

Chakraborty, J and Das, Swapan K and Rao, Venkatesh and Sinha, Arvind (2003) Behaviour of iron ion in the morphosynthesis of magnetite particles. Materials Transactions , 44 (6). pp. 1124-1127.

Chattoraj, I and Kumar, A and Das, Swapan K and Tarafder, Mita and Tarafder, S (2003) Factors influencing the extent of hydrogenenhanced brittle cracking in a Cu-strengthened HSLA steel during monotonic loading. Zeitschrift Fur Metallkunde , 94 (11). pp. 1228-1233.

Chattoraj, I and Tarafder, Mita and Das, Swapan K and Tarafder, S (2003) Hydrogen induced brittle crack growth in Cu-strengthened HSLA-100 steels. Materials Science and Engineering A, 339 (1-2). pp. 136-149.

Chattoraj, I and Tarafder, Mita and Das, Swapan K and Tarafder, S (2003) Hydrogen induced brittle crack growth in Cu-strengthened HSLA100 steels. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 339 (1-2). pp. 136-149.

Chaudhary, S K (2003) An innovative solution for deterioration of railway track. Journal of Metallurgy and Materials Science . pp. 45-53.

Das, Goutam and Ghosh, Sukomal and Ghosh Chowdhury, S and Ghosh, Sabita and Das, Swapan K and Bhattacharya, D K (2003) Investigation of sub-surface cracks in continuous cast billets. Engineering Failure Analysis, 10 (3). pp. 363-370.

Das, Goutam and Ghosh Chowdhury, S and Ray, Ashok K and Das, Swapan K and Bhattacharya, D K (2003) Turbine blade failure in a thermal power plant. Engineering Failure Analysis, 10 (1). pp. 85-91.

Das, Goutam and Ghosh Chowdhury, S and Sahay, S K and Ranganath, V R and Vaze, K K (2003) Development and validation of ball indentation technique to evaluate the mechanical properties of materials. Transactions Of The Indian Institute Of Metals , 56 (5). pp. 465-475.

Das, Goutam and Ray, Ashok K and Ghosh, Sabita and Das, Swapan K and Bhattacharya, D K (2003) Fatigue failure of a boiler feed pump rotor shaft. Engineering Failure Analysis, 10 (6). pp. 725-732.

Das, N N and Dash, A and Brahama, G S and Mohapatra, P (2003) Synthesis, characterisation and dissociation of a glycinate bridged trinuclear Co(III)-Cu(II)-Co(III) complex. Inorganic Reaction Mechanisms , 5 (1). pp. 73-77.

Das, Samar and Ghosh, Arindam and Chatterjee, S and Ramachandrarao, P (2003) The effect of cooling rate on structure and properties of a HSLA forging. Scripta Materialia, 48 (1). pp. 51-57.

Das, Samar and Ghosh, Arindam and Chatterjee, S and Ramachandrarao, P (2003) Microstructural characterization of controlled forged HSLA-80 steel by transmission electron microscopy. Materials Characterization, 50 (4-5). pp. 305-315.

Das, Suchandan K (2003) Transport phenomena and process modelling issues in mineral processing operations. Transactions Of The Indian Institute Of Metals , 56 (3). pp. 269-279.

Das, Suchandan K and Godiwalla, K M (2003) Phase-field approach - A paradigm shift in metallurgical solidification modelling. Indian Foundry Journal, 49 (7). pp. 17-22.

Das, Swapan K and Bhattacharya, D K (2003) Corrosion failure of Zn-Al detonator housing. Engineering Failure Analysis, 10 (6). pp. 639-643.

Das, Swapan K and Bhattacharya, D K (2003) Corrosion failure of Zn–Al detonator housing. Engineering Failure Analysis, 10 (6). pp. 639-643.

Dey, Shobhana and Bhattacharjee, S (2003) Collectorless flotation of a coking coal. Transactions Of The Indian Institute Of Metals , 56 (5). pp. 477-482.

Ghosh, Arindam and Das, Samar and Chatterjee, S and Mishra, B and Ramachandrarao, P (2003) Influence of thermo-mechanical processing and different post-cooling techniques on structure and properties of an ultra low carbon Cu bearing HSLA forging. Materials Science and Engineering A, 348 (1-2). pp. 299-308.

Ghosh, Rita and Singh, R J and Singh, D D N (2003) Comparing the corrosion resistance of thermo-mechanically treated rebars of low alloy and mild steels embedded in chloride-contaminated concrete mortars. Corrosion Prevention & Control , 50 (2). pp. 94-103.

Ghosh, Rita and Singh, R J and Singh, D D N (2003) Role of fluoride in accelerating corrosion and pitting of steel in concrete environments. Transactions Of The Indian Institute Of Metals , 56 (4). pp. 391-397.

Gorai, Bipra and Jana, R K and Premchand, (2003) Characteristics and utilisation of copper slag—a review. Resources, Conservation and Recycling, 39 (4). pp. 299-313.

Gorai, Bipra and Jana, R K and Premchand, (2003) Characteristics and utilisation of copper slag - a review. Resources Conservation and Recycling, 39 (4). pp. 299-313.

Gupta, K K and Bhattacharjee, S and Kar, S and Chakrabarty, S and Thakur, P and Bhattacharyya, G and Srivastava, S C (2003) Mineral compositions of eight common spices. Communications in Soil Science and Plant Analysis, 34 (5-6). pp. 681-693.

Khanra, A K and Pathak, L C and Mishra, Suman K and Godkhindi, M M (2003) Self-propagating-high-temperature synthesis (SHS) of ultrafine ZrB2 powder. Journal of Materials Science Letters, 22 (17). pp. 1189-1191.

Khatirkar, R K and Badole, R P and Vaish, A K and Humane, M M and De, P K and Paretkar, R K and Peshwe, D R and Prasad, D N (2003) Thermomechanical processing of low carbon, IF and IF high strength steels - A few typical cases. Journal of Metallurgy and materials Science, 45 (4). pp. 161-191.

Konar, J and Chandra, N and Amritphale, S S and Das, N N and Srivastava, S C (2003) Corrosion behaviour of white cast iron in organic acids and their sodium salts. Journal of Metallurgy and Materials Science, 45 (1). pp. 39-43.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2003) Electrodeposited Ni-B alloy films: Preparation and structural aspects. Transactions Of The Indian Institute Of Metals , 56 (4). pp. 341-346.

Kumar, A and Tarafder, S and Mukherjee, Surojit and Das, Swapan K and Ravi Kumar, B and Chattoraj, I (2003) Effect of plasma ion implantation on the hydrogen embrittlement of Cu strengthened HSLA-100 steel. Journal of Materials Science, 38 (12). pp. 2667-2671.

Kumar, Sanjay and Das, Swapan K and Daspoddar, P K (2003) Thermo-mechanical behaviour of low cement castables derived from mullite aggregates synthesised from beach sand sillimanite. Ceramics International, 29 (2). pp. 139-144.

Kumar, Sushil and Udayabhanu, G and Godiwalla, K M (2003) Chemical composition and mineralogical characterization of fly ash from Bokaro Thermal Power Station, India. Journal of Metallurgy and materials Science., 45 (1). pp. 55-59.

Mahato, D K and Chaudhary, R K and Das , N N and Srivastava, S C (2003) Thermal behaviour of spray dried PZT and PLNZT powders. Indian Journal Of Pure & Applied Physics , 41 (10). pp. 767-770.

Mahato, D K and Chaudhary, R K and Srivastava, S C (2003) Effect of Na on microstructure, dielectric and piezoelectric properties of PZT ceramic. Journal of Materials Science Letters, 22 (22). pp. 1613-1615.

Mallikarjun, K and Suwas, S and Ghosh Chowdhury, S and Bhargava, S (2003) Effect of prior beta processing steps on microstructural refinement during thermomechanical processing of a two phase (alpha+beta) titanium alloy. Materials Science and Technology, 19 (12). pp. 1688-1696.

Mehta, K D and Pandey, B D and Mankhand, T R (2003) Studies on kinetics of biodissolution of metals from Indian Ocean nodules. Minerals Engineering, 16 (6). pp. 523-527.

Mishra, D and Anand, S and Panda, R K and Das, R P (2003) Synthesis of high-surface area Mn-doped barium hexa-aluminates by a combination of hydrothermal precipitation–calcination route. Materials Chemistry and Physics, 82 . pp. 892-896.

Mishra, H N and Das, Chitrangada (2003) A review on biological control and metabolism of aflatoxin. Critical Reviews in Food Science and Nutrition, 43 (3). pp. 245-264.

Mishra, Suman K and Das, Swapan K and Ramachandrarao, P and Belov, D Yu and Mamyan, S (2003) Synthesis of zirconium diboride-alumina composite by the self-propagating, high-temperature synthesis process. Metallurgical and Materials Transactions A, 34 (9). pp. 1979-1983.

Mishra, T and Tiwari, S K and Das, N N and Mahato, B (2003) Synthesis and sorption properties of 13X zeolite derived from coal fly ash. Journal of Metallurgy and materials Science, 45 (4). pp. 193-198.

Mitra, A and Kim, H Y and Louzguine, D V and Nishiyama, N and Shen, B and Inoue, A (2003) Magnetic properties of melt-spun and annealed Fe62Co9.5Gd3.5Si10B15 alloy. Journal Of Physics D-Applied Physics, 36 (18). pp. 2234-2238.

Mitra, A and Kim, H Y and Shen, B L and Nishiyama, N and Inuue, A (2003) Crystallization and magnetic properties of Fe40Co40Cu0.5Al2Zr9Si4B4.5 and Fe62Co9.5Gd3.5Si10B15 amorphous alloys. Materials Transactions , 44 (8). pp. 1562-1565.

Mitra, A and Panda, A K and Singh, Ratnakar and Rao, Venkatesh and Ramachandrarao, P (2003) Magnetic and structural behaviours of nanocrystalline Fe70.8Nb3.7Cu1Al2.7Mn0.7Si13.5B7.6 alloy. Philosophical Magazine, 83 (12). pp. 1495-1509.

Mohanta, Ojaswini and Mitra, A and Chattoraj, I (2003) Reversible magnetic and mechanical response in hydrogenated amorphous Fe73.5Nb3Cu1Si13.5B9 alloys. Journal of Magnetism and Magnetic Materials, 266 (3). pp. 296-301.

Mohapatra, B K and Nayak, B (2003) Mn-olivine from Gangpur Group of rocks, Orissa. Journal Of The Geological Society Of India, 61 (5). pp. 581-587.

Murthy, D S R and Kumar, Vinay and Rao, K V (2003) Extraction of gold from an Indian low-grade refractory gold ore through physical beneficiation an thiourea leaching. Hydrometallurgy, 68 (1-3). pp. 125-130.

Murthy, D S R and Kumar, Vinod and Rao, K V (2003) Extraction of gold from an Indian low-grade refractory gold ore through physical beneficiation and thiourea leaching. Hydrometallurgy, 68 (1-3). pp. 125-130.

Nachankar, A V and Vaish, A K and Humane, M M and De, P K and Moghe, D V and Pathak, S U (2003) Bake hardening mechanism in steels. Journal of Metallurgy and materials Science, 45 (4). pp. 143-160.

Narayanan, TSNS and Krishnaveni, K and Seshadri, S K (2003) Electroless Ni-P/Ni-B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance. Materials Chemistry and Physics, 82 (3). pp. 771-779.

Narayanan, TSNS and Selvakumar, S and Stephen, A (2003) Electroless Ni-Co-P ternary alloy deposits: preparation and characteristics. Materials Chemistry and Physics , 172 (2-3). pp. 298-307.

Nayar, S and Sinha, Arvind (2003) Protein induced morphosynthesis of calcium carbonate. Journal of Materials Science Letters, 22 (3). pp. 167-170.

Pal, J and Chaudhary, P N and Goswami, M C (2003) Utilisation of LD slag - An overview. Journal of Metallurgy and Materials Science, 45 (2). pp. 61-72.

Pal, J and Goswami, M C and Singh, Manjit and Singh, K K (2003) Desulphurisation of high sulphur coal to improve industrial utilisation. Ironmaking & Steelmaking, 30 (6). pp. 441-446.

Panda, A K and Basu, S and Mitra, A (2003) Demagnetisation effect and its correction on the measurement of magnetic hysteresis loop of melt-spun ribbons. Journal of Magnetism and Magnetic Materials, 261 (1-2). pp. 190-195.

Panda, A K and Ravi Kumar, B and Basu, S and Mitra, A (2003) Crystallization and soft magnetic properties of rapidly solidified Fe73.5Nb3Cu1Si22.5-XBX (X=5, 9, 10, 11.25 19) alloys. Materials Transactions , 260 (1-2). pp. 70-77.

Panda, A K and Ravi Kumar, B and Basu, S and Mitra, A (2003) Crystallization and soft magnetic properties of rapidly solidified Fe73.5Nb3Cu1Si22.5−XBX (X=5, 9, 10, 11.25, 19) alloys. Journal of Magnetism and Magnetic Materials, 260 (1-2). pp. 70-77.

Parashar, S K S and Basu, D K and Banerjee, M K (2003) Coating failure analysis using stress intensity factor and fracture energy. Journal of Metallurgy and materials Science, 45 (1). pp. 11-17.

Parashar, S K S and Basu, D K and Banerjee, M K (2003) Electrochemical impedance spectroscopy of cashewnut shell liquid coating system. Journal of Metallurgy and materials Science, 45 (2). pp. 97-101.

Parashar, S K S and Basu, D K and Banerjee, M K (2003) Localised / galvanic corrosion of Mg-Zn-Al alloy. Journal of Metallurgy and materials Science, 45 (3). pp. 137-141.

Parida, N and Tarafder, S and Das, Swapan K and Kumar, P and Das, Goutam and Ranganath, V R and Bhattacharya, D K (2003) Failure analysis of coal pulverizer mill shaft. Engineering Failure Analysis, 10 (6). pp. 733-744.

Ranganathan, S and Ramachandrarao, P (2003) Application of transformation diagrams to predict phase transformation in alloys. Calphad, 27 (1). pp. 39-56.

Rao, V V (2003) Commentary on carbon pickup paper. Welding Journal , 82 (1). pp. 91-92.

Rao, V V (2003) Preparation of net-shape Al2O3/Al3Ni in situ composites by reactive melt penetration. Indian Journal Of Engineering And Materials Sciences , 10 (5). pp. 424-426.

Raposo, V and Vazquez, M and Mitra, A (2003) Torsion dependence of giant magnetoimpedance in amorphous wires. Journal of Magnetism and Magnetic Materials, 254-255 ( ). pp. 179-181.

Ravi Kumar, B and Das, Swapan K and Bhattacharya, D K (2003) Fatigue failure of helical compression spring in coke oven batteries. Engineering Failure Analysis, 10 (2). pp. 291-296.

Ray, Ashok K and Das, Swapan K and Pathak, L C (2003) Synthesis of silicon carbide mats using natural fibers. Materials Letters, 57 (5-6). pp. 1120-1123.

Ray, Ashok K and Sahay, S K and Goswami, B (2003) Assessment of service exposed boiler tubes. Engineering Failure Analysis, 10 (6). pp. 645-654.

Ray, Ashok K and Sinha, S K and Tiwari, Y N and Swaminathan, J (2003) Analysis of failed reformer tubes. Engineering Failure Analysis, 10 (3). pp. 351-362.

Sahoo, K L and Das, S K and Murty, B S (2003) Formation of novel microstructures in conventionally cast Al–Fe–V–Si alloys. Materials Science and Engineering A, 355 (1-2). pp. 193-200.

Sahoo, K L and Das, Swapan K (2003) Effect of magnesium on sliding wear performance of cast Al-8.3Fe-0.8V-0.9Si alloys. Materials Science and Technology, 19 (7). pp. 959-965.

Sahoo, K L and Das, Swapan K and Murty, B S (2003) Formation of novel microstructures in conventionally cast Al-Fe-V-Si alloys. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing , 355 (1-2). pp. 193-200.

Sahoo, K L and Rao, Venkatesh and Mitra, A (2003) Crystallization kinetics in an amorphous Al-Ni-Mm-Fe alloy. Materials Transactions , 44 (6). pp. 1075-1080.

Sahoo, K L and Sivaramakrishnan, C S (2003) Some studies on Al-8.3Fe-0.8V-0.9Si alloy for near net shape casting. Journal of Materials Processing Technology, 135 (2-3). pp. 253-257.

Sahoo, K L and Sivaramakrishnan, C S (2003) Some studies on Al–8.3Fe–0.8V–0.9Si alloy for near net shape casting. Journal of Materials Processing Technology, 135 (2-3). pp. 253-257.

Saleem, Sheik shahid (2003) Regression analysis for selection of a noise descriptor to accurately predict traffic noise on Indian highways. Journal of Metallurgy and Materials Science, 45 (3). pp. 127-135.

Sankara Narayanan, T S N and Krishnaveni, K and Seshadri, S K (2003) Electroless Ni–P/Ni–B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance. Materials Chemistry and Physics, 82 (3). pp. 771-779.

Sankara Narayanan, T S N and Magesh, G and Rajendran, N (2003) Degradation of o-Chlorophenol from aqueous solution by electro-fenton process. Fresenius Environmental Bulletin, 12 (7). pp. 776-780.

Sankara Narayanan, T S N and Selvakumar, S and Stephen, A (2003) Electroless Ni–Co–P ternary alloy deposits: preparation and characteristics. Surface and Coatings Technology, 172 (2-3). pp. 298-307.

Singh, D D N and Ghosh, Rita (2003) Corrosion resistance performance of fusion bonded epoxy coated rebars used as reinforcement in concrete structures. Journal of Metallurgy and materials Science, 45 (2). pp. 73-83.

Singh, D D N and Ghosh , Rita and Singh, R J (2003) Corrosion Performance of Steel Rebars Embedded in Chloride Contaminated Concrete Mortars-Role of Surface Pre-Treatments. Metals Materials and Processes, 16 (2-3). pp. 1-14.

Singh, D D N and Kumar, A (2003) A fresh look at ASTM g 1-90 solution recommended for cleaning of corrosion products formed on iron and steels. Corrosion Science, 59 (11). pp. 1029-1036.

Singh, M N and Singh, T B and Bhattamishra, A K and Basu, D K and Narang, S K (2003) Utilization of zinc dross as anode during electro-deposition of zinc-iron alloy coatings on steel substrate using chloride bath. Journal of Metallurgy and materials Science, 45 (2). pp. 91-95.

Singh, P K and Ranganath, V R and Tarafder, S and Prasad, Prabha and Bhasin, V and Vaze, K K and Kushwaha, H S (2003) Effect of cyclic loading on elastic–plastic fracture resistance of PHT system piping material of PHWR. International Journal of Pressure Vessels and Piping, 80 (10). pp. 745-752.

Singh, P K and Ranganath, V R and Tarafder, S and Prasad , P and Bhasin, V and Vaze, K K and Kushwaha, H S (2003) Effect of cyclic loading on elastic-plastic fracture resistance of PHT system piping material of PHWR. International Journal of Pressure Vessels and Piping, 80 (10). pp. 745-752.

Singh, Raghuvir (2003) The application of an electrochemical technique to determine the porosity of electroless nickel coatings produced in hypophosphite baths. Anti-corrosion Methods & Materials, 50 (2). pp. 121-128.

Singh, Raghuvir and Chattoraj, I and Kumar, Anil and Ravi Kumar, B and De, P K (2003) The effects of cold working on sensitization and intergranular corrosion behavior of AISI 304 stainless steel. Metallurgical and Materials Transactions A, 34 (11). pp. 2441-2447.

Singh, Ratnakar and Ravi Kumar, B and Kumar, A and Dey, P K and Chattoraj, I (2003) The effects of cold working on sensitization and intergranular corrosion behavior of AlSl 304 stainless steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science , 34-A (11). pp. 2441-2447.

Singh, Ratnakar and Sinha, S N (2003) Beneficiation of High Ash Indian Coal-Problems and Prospects. The Indian Mining and Engineering Journal . pp. 1-4.

Singh, T B and Singh, M N and Basu, D K and Narang, S K (2003) Corrosion behaviour of electro-deposited zinc-iron alloy coatings on mild steel. Journal of Metallurgy and materials Science., 45 (4). pp. 199-203.

Sinha, Arvind and Chakraborty, J and Das, Swapan K and Ramachandrarao, P (2003) Self-assembled growth of calcite particles on a tobacco film. Current Science , 84 (11). pp. 1437-1440.

Sinha, Arvind and Nayar, S and Agrawal, A and Bhattacharya, D (2003) Synthesis of nanosized and microporous precipitated hydroxyapatite in synthetic polymers and Biopolymers. Journal Of The American Ceramic Society , 86 (2). pp. 357-359.

Sinha, Arvind and Nayar, S and Murthy, G V S and Joy, P A and Rao, Venkatesh and Ramachandrarao, P (2003) Biomimetic synthesis of superparamagnetic iron oxide particles in proteins. Journal of Materials Research, 18 (6). pp. 1309-1313.

Sinha, I and Mandal, R K (2003) Simulating the effect of glass microstructures on the crystallisation and percolation behaviour of glass-ceramics. Journal of Non-Crystalline Solids, 324 (1-2). pp. 36-49.

Sivaprasad, S and Swaminathan, J and Tiwari, Y N and Roy, P K and Singh, Raghubir (2003) Remaining life assessment of service exposed reactor and distillation column materials of a petrochemical plant. Engineering Failure Analysis, 10 (3). pp. 275-289.

Srikanth, S and Gopalakrishna, K and Das, Swapan K and Ravi Kumar, B (2003) Phosphate induced stress corrosion cracking in a waterwall tube from a coal fired boiler. Engineering Failure Analysis, 10 (4). pp. 491-501.

Srikanth, S and Rao, D S and Das, Swapan K and Ravi Kumar, B and Nandakumar, K and Dhanuskodi, R and Vijayan, P (2003) Combustion and deposit formation behavior on the fireside surfaces of a pulverized fuel boiler fired with a blend of coal and petroleum coke. Combustion Science and Technology, 175 (9). pp. 1625-1647.

Srikanth, S and Ravi Kumar, B and Das, Swapan K and Gopalakrishna, K and Nandakumar, K and Vijayan, P (2003) Analysis of failures in boiler tubes due to fireside corrosion in a waste heat recovery boiler. Engineering Failure Analysis, 10 (1). pp. 59-66.

Tarafder, S and Ranganath, V R and Sivaprasad, S and Johri, P (2003) Ductile fracture behaviour of primary heat transport piping material of nuclear reactors. Sadhana, 28 (1-2). pp. 167-186.

To Duy, Ca and Lee, Z H and Park, Y H and Shin, J S (2003) Effect of Lathanium on thermodynamics of sulphides formation in molten steel. Journal of Metallurgy and Materials Science, 45 (2). pp. 85-90.

Upadhyay, C and Mishra, D and Anand, S and Verma, H C and Das, R P (2003) Effect of preparation conditions on formation of nanophase Ni–Zn ferrites through hydrothermal technique. Journal of Magnetism and Magnetic Materials, 260 . pp. 188-194.

Vaish, A K and Humane, M M and De, P K and Mahato, B and Ravi Kumar, B (2003) Effect of texture formation on formability of cold rolled and annealed extra deep drawing and inerstitial free steel sheets. Journal of Metallurgy and materials Science, 45 (1). pp. 1-10.

Vaish, A K and Minj, R K and Marutiprasad, Y (2003) Modern features for the optimum performance of blast furnace. Journal of Metallurgy and materials Science, 45 (3). pp. 103-125.

Venkateswarlu, K and Das, Swapan K and Chakraborty, M and Murty, B S (2003) Influence of thermo-mechanical treatment of Al-5Ti master alloy on its grain refining performance on aluminium. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing , 351 (1-2). pp. 237-243.

Venkateswarlu, K and Das, Swapan K and Chakraborty, M and Murty, B S (2003) Influence of thermo-mechanical treatment of Al–5Ti master alloy on its grain refining performance on aluminium. Materials Science and Engineering A, 351 (1-2). pp. 237-243.

Book or NML Publication

UNSPECIFIED (2003) Advanced materials. In: Pathak, L C and Venkateswarlu, K and Bandopadhyay, Amitava and Ray, Ajoy K, (eds.) Advanced materials. Allied, New Delhi. ISBN ISBN 81 -7764-479-3

Director, NML (2003) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-16. ISBN 0972-4265

Director, NML (2003) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-12. ISBN 0972-4265

Director, NML (2003) NML news. In: NML news. NML, Jamshedpur, Jamshedpur, pp. 1-8. ISBN 0972-4265

Prakash, S and Pal, Sital K (2003) On the know-how package. In: Synergy of R&D & Marketing. NML, Jamshedpur, India, Jamshedpur, pp. 206-214. ISBN 81-87053-57-9

Ram, M (2003) Technology Transfer to Small Scale Industries. In: Synergy of R&D & Marketing. NML, Jamshedpur, India, Jamshedpur, pp. 134-137. ISBN 81-87053-57-9

Ramachandrarao, P (2003) Innovation Management. In: Synergy of R&D & Marketing. NML, Jamshedpur, pp. 67-78. ISBN 81-87053-57-9

Roy, Santanu (2003) Interfacing R&D and Marketing: Tacit Knowledge and S &T Manpower Deployment in CSIR, India. In: Synergy of R&D & Marketing. , . NML, Jamshedpur, pp. 12-28. ISBN 81-87053-57-9

Sankara Narayanan, T S N (2003) The role of surfactants in phosphate conversion coatings. In: Surfactants in Polymers, Coatings, Inks and Adhesives. Applied Surfactant Series, Vol. 1 . Blackwell Publishing Company Ltd., and CRC Press, Oxford, UK, pp. 271-302. ISBN 978 0849 32808 4

Sarkar, S B (2003) Role of Indigenous R&D in the Present Industrial Scenario. In: Synergy of R&D & Marketing. NML, Jamshedpur, pp. 29-35. ISBN 81-87053-57-9

Satyanarayana, N V (2003) Creativity, Innovation and Problem Solving. In: Synergy of R&D & Marketing. NML, Jamshedpur, India, Jamshedpur, pp. 96-110. ISBN 81-87053-57-9

Sharma, N K (2003) Factors to be Considered for Technology Assessment and Valuation. In: Synergy of R&D & Marketing. NML, Jamshedpur, India, Jamshedpur, pp. 143-163. ISBN 81-87053-57-9

Conference or Workshop Item

Biswas, D K and Goswami, N G (2003) Technology Evaluation : Experience and Few Case Studies. In: UNSPECIFIED.

Chakrabarti, D M (2003) Customer Feedback in R&D Business. In: UNSPECIFIED.

Chatterjee, Kakali (2003) Rural Markets for Technologies - Present Indian Scenario. In: UNSPECIFIED.

Chaudhary, P N (2003) Transfer of know-how, the need for a holistic approach. In: UNSPECIFIED.

Ghosh, R N (2003) Identification of Novelty in R&D. In: UNSPECIFIED.

Goswami, N G (2003) Marketing : Business Promotion - Some Thoughts and a Few Case Studies. In: UNSPECIFIED.

Gupta, M N (2003) Impediments in Technology Transfer. In: UNSPECIFIED.

Gupta, R K (2003) Managing Intellectual Property. In: UNSPECIFIED.

Madhukar, A (2003) Technology Forecasting - An Important Tool for Marketing in R&D. In: UNSPECIFIED.

Mallik, A K and Paul, K K and Kumar, A Seshu (2003) Engineering Associated with Research and Development. In: UNSPECIFIED.

Mishra, K K (2003) Synergy of Technology Transfer. In: UNSPECIFIED.

Mishra, P N and Goswami, N G and Mishra, S N (2003) Marketing in Libraries and Information Centres : A study on promotional efforts with reference to Jamshedpur City. In: UNSPECIFIED.

Mishra, P N and Mishra, S N (2003) Prospects of digital information system and services in National Metallurgical Laboratory (CSIR), Jamshedpur. In: Prospects of digital information system and services in National Metallurgical Laboratory (CSIR), Jamshedpur. In: 48th Convention of Indian Library Association, 22-25 Jan 2003, Bangalore, India.

Mohanty, O N (2003) Challenge in R&D Management : Tata Steel A Case Study. In: UNSPECIFIED.

Mukherjee, S P (2003) Measurement of Customer Satisfaction. In: UNSPECIFIED.

Pal, Sital K and Prakash, S (2003) Management of Intellectual Property Rights in R&D Organisations. In: UNSPECIFIED.

Patent

US2002000045033 (2003) Sensing device for the non-destructive evaluation of steel structures or components. US6617847.

US2002000112053 (2003) Process for the recovery of gold and silver from used refractory bricks. US6602319.

Thesis

Maity, Sujata (2003) Study on naturally occurring minerals for the removal of arsenic from groundwater. PhD thesis, National Metallurgical Laboratory (NML) Jamshedpur.

This list was generated on Sun May 27 03:41:56 2012 IST.