| Login | Create Account | Upload Instructions |
Browse by Document Type
Number of items: 1190.
AAbhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D (2007) Bio-hydrometallurgical approach in processing of low grade Indian uranium ore in Column Reactor. In: Proc. BIOHYDROMET 2007, May 1-2 2007, Falmouth, U.K.. Abhilash, and Prakash, Mayuri and Pandey , B D (2011) Microbial Composite in Trivalent Chromium Remediation from Effluents. In: IIIrd International Congress on Nonferrous Metals, 7-9th Sept 2011, Krasnoyarsk,Russia. Abhilash, and Singh, Nivedita and Mehta, K D and Pandey, B D (2011) Kaolinte Based Microbial Composite in Cr(III) sorption from waste waters. In: National Seminar on Environmental Waste Management in Metallurgical Industries, 15-16th March 2010, ITBHU,Varanasi. Abhilash, and Beena, Kumari (2011) Technology Transfer-A Case Study at NML. In: Technology Valorisatioin and Management at ASCI, 30Jan-12Feb2011, Hyderabad. Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D (2007) Biosorption of trivalent chromium from a model tanning solution by adapted aspergillus niger. In: Proceedings of Mineral Biotechnology-2007, 2007. Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D and Tamrakar, P K (2007) Amenability of low- grade uranium towards column bioleaching by acidithiobacillus ferrooxidans. In: International Seminars in Mineral Processing Technology (MPT 2007), 2007. Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D and Tamrakar, P K (2010) Bioleaching - an alternate uranium ore processing technology for India. In: 2nd International conference on Asian nuclear prospects, 11-13 October 2010, Mamallapuram, Chennai, India. Abhilash, and Mehta, K D and Pandey, B D (2011) Biomineral Processing of Zinc Tailings and Synthesis of Value Added Nanomaterials. In: XIIth Int. Conf. on Mineral Processing Technology (MPT-2011), 20-22nd October 2011, Udaipur. Abhilash, and Pandey, B D and Ray, L (2010) Kinetics and mechanism of uranium bioleaching from a low grade indian ore. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Aborn, Robert H (1966) The role of selenium and tellurium in ferrous metals. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Abraham, M C and Ghosh, A (1973) Kinetics of Reduction of Iron Oxides and Ores by Carbon. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Acharya, S and Jena, M S and Mohanty, J K (2010) Aqueous alkaline processing of chromite mine overburden. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Adhia, J D (1969) Characteristics of electrolytic cells. In: UNSPECIFIED. Adhia, J D (1969) Effect and Control of Impurities in Electrolytic Zinc Production. In: UNSPECIFIED. Adhia, J D (1969) First fluo-solid Roaster in India-design and Operation. In: UNSPECIFIED. Adhia, J D (1968) Paper Fluo-Solid Roaster in India Design and Operation. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Agarwal, S and Sahu, K K and Godiwalla, K M and Rajak, D K and Smita, K and Jana, R K (2010) An experimental and thermodynamic study on reduction smelting of sea nodules to recover valuable metals. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Agrawal, A and Ielea, S M and Pandey, B D and Kumar, Vinay and Premchand, (1997) Use of D2ehpa as an Extractant for the Recovery Of Cu, Ni, Co & Zn From Ammoniacal Leach Liquor of Sea Nodules. In: Proceedings of the Internatinal Conference on "Recent Advances in Metallurgical Processes" Golden Jubilee Celebrations, 1997, Department of Metallurgy, Indian Institute of Science, Bangalore. Agrawal, A and Kumari, S and Manoj, M K and Pandey, B D and Kumar, Vinay and Bagchi, D and Premchand, (2002) Seperation & Recovery of Copper & Nickel from Copper Bleed Stream by Solvent Extraction Route. In: International Symposium on Solvent Extraction, September 2002. Agrawal, A and Pandey, B D and Kumar, Vinay and Premchand, (1996) Solvent extraction in copper metallurgy recovery of acid and metals from copper bleed stream. In: Seminar on Recovery of Valuable By - Products from Intermediate Secondaries in Non-Ferrous Industries, 1996. Agrawal, A and Pathak, Pankaj and Mishra, D and Sahu, K K (2011) Recovery of metal values from spent nickel-cadmium rechargeable batteries by solvent extraction route. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Agrawal, A and Perween, M and Pramanick, Shubhajit and Sahu, K K (2011) Recovery of copper from PCB leach solution by solvent extraction. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Agrawal, A and Sahu, K K (2005) Detoxification of cadmium from industrial effluents using solid waste generated after sea nodule processing. In: Proceedings of the Sixth (2005) ISOPE Ocean Mining Symposium, 2005, ISOPE Ocean Mining Symposium. Agrawal, B B and Prasad, K K and Ray, H S (2000) Utilisation of Iron Oxide Waste through Cold Bonded Pelletisaion. In: International Symposium on Processing of fines - Vol.2, 2000, NML Jamshedpur, Jamshedpur. Agrawal, B C and Herrschaft, Donald C (1968) A New Zinc Base Alloy - ILZRO 12. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Agrawal, B C and Herrschaft, Donald C (1969) A new Zinc-base alloy - ILZRO 12. In: UNSPECIFIED. Agrawal, B K and Menon, M P and Bhatnagar, P P (1960) Recovery of Vanadium Pentoxide from Vanadium Bearing Titaniferrous Magnetites Projected Pilot Plant Studies. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Agrawal, V K (1966) ACAR Conductors-A Techno-Economic Evaluation. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Ahmed, (1968) The Present Status and the Projected Programme of Zirconium Development in India. In: Symposium on Non-ferrous Metals Technology : Papers for the presentation, 4th - 7th Dec. I968, CSIR - National Metallurgical Laboratory, Jamshedpur. Ahmed, (1968) The Present Status and the Projected Programme on Niobium-Tantalum Metallurgy in India. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Akerkar, D D (1985) Some Observations on the Processing of the Polymetallic Sea nodules at the National Metallurgical Laboratory. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpur. AL-Jarrah, J A and Ghosh, P K and Ray, S (1998) Mixing & solidification Processing of AI-AI2o3 Composite. In: UNSPECIFIED. Alex, T C and Kumar, Rakesh and Kailath, A J and Roy, S K and Mehrotra, S P (2010) Physicochemical changes during mechanical activation of boehmite. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Alex, T C and Srivastava, J P and Srikanth, S and Premchand, (1997) Pelletisation of reactant dosed laterite. In: Processing of fines: Proceedings of the national seminar, Jan 9-10, 1997, NML Jamshedpur, India. Altekar, V A (1985) Presidential Address. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of the Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Altekar, V A (1973) Sponge Iron Technology - Efforts at the National Metallurgical Laboratory. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, 19-21, Feb. 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Altekar, V A (1973) Welcome Address. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Altekar, V A and Gupta, K N and Paul, B K and Soni, V K (1973) Naphtha Reduction of Iron Ores to Sponge Iron in Continuous Vertical Reactor. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Altekar, V A and Ravindran, P A and Vaidya, V V (1968) Some experiences in Electro-winning of Aluminium from fused Chloride bath. In: UNSPECIFIED. Alva, K P and Khare, N B (1985) Sampling in Coal Handling and Preparation Plants. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Anand Ram, S and Abhilash, and Mehta, K D and Pandey, B D and Mankhand, T R (2008) Bioleaching of a low grade Indian Chalcopyrite ore by Microbial consortium. In: CTWMI 2008, 13-16 April 2008, Santiago,Chile. Anand Ram, S and Abhilash, and Mehta, K D and Pandey , B D and Mankhand, T R (2008) Microbial dissolution of a low grade Indian chalcopyrite ore using mixed culture of Mesophiles. In: International Seminar on Mineral Processing Technology (MPT-2008) , April 22-24, 2008, Trivandrum,INDIA. Andersen, Hans Chr (1973) Submerged Arc Furnace, an Alternative for Smelting of Sponge Iron? In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Anjali, Kumari and Pandey, Rajesh Kumar (2011) Clean coal technology—a technical response to the environmental challenges. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Ansari, M I (1997) Fine Particle Processing - A difficult Problem for Mineral Engineers. In: UNSPECIFIED. Antia, Dara P (1957) The Aluminium Industry in India. In: UNSPECIFIED. Antoine, J and Astier, J (1973) The Increasing use of Prereduced Iron Ores in Electric Arc Furnaces. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Anupam, A and Singh, G and Raghav, P K and Suresh, N (2010) Studies on beneficiation of BHQ samples by different methods. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Arora, Punit and Gupta, Suneel Kumar and Bhasin, V and Vaze, KK and Sivaprasad, S and Tarafder, S (2011) Multiaxial fatigue studies on carbon steel piping material of Indian PHWRs. In: 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21), 6-11 November, 2011, New Delhi, India . Arora, S M and Gupta, P K (1969) Brittleness in Copper. In: UNSPECIFIED. Arora, S M and Gupte, P K (1968) Brittleness in Copper. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Arora, S M and Kapoor, A N and Gupte, P K and Nijhawan, B R (1966) Substitution of galvanising by aluminising of steels. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Aruna, V A J and Goswami, S N and Bawane, P R and Ram, Mohan and Gundewar, C S (2010) Enhancing chalcopyrite flotation by tackling hydrophobic silicate gangue. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Asnani, C K and Ramachandran, K and Sarma, G V S N and Kulkarni, A P (2002) Ultrasonic Cleaning and Re-use of HEPA Filters in Nuclear Fuel Manufacturing Facility. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25, January, 2002, CSIR - National Metallurgical Laboratory, Jamshedpur. Asundi, M K (1961) The Role of Light Metals in Nuclear Engineering. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. BBabu, S R and Sengupta, M (1994) Techno-economics of using Sponge Iron. In: UNSPECIFIED. Bacon, N H (1958) Segregation and Internal Weakness in Forging Ingots. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Badami, G N (1961) Hazards from Frictional Sparks of Certain Light Alloys. In: Symposium on Light Metal Industry in India, Feb. 14-17, NML, Jamshedpur. Bagchi, S and Raychaudhuri, K K and Raja, K (1973) Indian Coals for Sponge Iron Process. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Bahadur, Aruna (1997) Residual stress evaluation using XRD and failure analysis. In: UNSPECIFIED. Bahadur, Aruna (1999) Role of X-ray diffraction in evaluating component integrity. In: UNSPECIFIED. Bahl, O P and Mathur, R B and Dwivedi, Hariom (1998) Correlation between the Surface Energetics of Reinforcement and Mechanical Properties of Carbon/Carbon Composites. In: UNSPECIFIED. Balakrishnan, T V and Vijayavargiya, M D (1968) Non-ferrous Metals and Alloys for use in the Indian Heavy Electrical Industry. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Balakrishnan, T V and Vijayavargiya, M D (1969) The role of non-ferrous metals in heavy electrical industry. In: UNSPECIFIED. Balarama-moorthy, K (1968) Current Trends in the Use of Zirconium Alloys. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Balasubramanian , Krishnan (2011) NDE Tools for process and product monitoring in manufacturing. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Balasundaram, L J (1968) The Applicability of size-factor and Electron Concent-ration Concepts to Alloying behaviour of Copper. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Ball, F A (1957) The welding of Monel & K-Monel. In: UNSPECIFIED. Bandopadhyay, A (2000) Multi-gravity Separator An Equipment for Separation of Fines. In: UNSPECIFIED. Bandopadhyay, A and Goswami, M C and Kumar, Sanjay (2005) Improvement of environmental performance of integrated steel sector through process integration & optimisation measures and innovative waste management practices. In: Emomami-2005, 2005, IATES, Bhubaneswar. Bandopadhyay, A and Mishra, K K and Ramachandrarao, P (1996) Critical Issues in Controlling Suspended Particulate Matters (SPM) from Cupola Exit Gases. In: UNSPECIFIED. Bandopadhyay, A and Mishra, K K and Ramachandrarao, P (1996) Critical issues in controlling suspended particulate matters (SPM) from cupola exit gases. In: UNSPECIFIED. Bandopadhyay, A and Singh, K K (1997) Control of Pollution created by suspended particulate matters (SPM) from small and Medium scale Iron and Steel and Refractory industries - The dry and wet options. In: UNSPECIFIED. Bandopadhyay, A and Singh, K K (1997) Control of pollution created by suspended particulate matters (SPM) from small and medium scale iron and steel and refractory industries: the dry and wet options. In: UNSPECIFIED. Bandopadhyay, P (1998) Coal Flotation : The Status and Outlook. In: Workshop on Froth Flotation: Recent Trends, September 22-24,1998, RRL Bhubaneswar. Banerjee, J and Chatterjee, G P (1966) Low carbon high chromium alloy without low carbon ferro-chrome. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Banerjee, S and Banerjee, P (1969) Orientation dependence of stress corrosion crack in cold rolled alpha brass. In: UNSPECIFIED. Banerjee, S K (2004) Order and Disorder in Alloys. In: The excerpt of the lecture delivered by D.S. Banerjee, 01/05/2003, Jamshedpur. Banerjee, Srikanta and Banerjee, P (1968) Orientation Dependence of Stress Corrosion Crack in Cold Rolled Alpha Brass. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Banerjee, T (1969) Closing Remark. In: UNSPECIFIED. Banerjee, T (1969) Greetings. In: UNSPECIFIED. Banerjee, T (1968) Research and development work on non-ferrous minerals, metals and alloys at the National Metallurgical Laboratory. In: UNSPECIFIED. Banerjee, T H and Sengupta, A K and Ram, Mohan (2010) Beneficiation of titaniferrous iron ore sample. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Barik, Anil (2010) Effective management of coke oven solid waste and by-products in steel plant. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Barraclough, K C (1958) The Effects of Hydrogen on Alloy Steel Production. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Baruah, B P and Khare, Puja and Rao, P G (2011) Management of acid mine drainage (AMD) in Indian coal mines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Basak, G and Sampath, V S and Bhatnagar, P P (1968) Recovery of Non-ferrous Metallic Values from Metallurgical Wastes. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Basak, G and Sampath, V S and Bhatnagar, P P (1969) Recovery on non-ferrous metallic values from metallurgical wastes. In: UNSPECIFIED. Basak, P and Saxena, B K and Das, B N (1968) Joining of Aluminium. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Basak, P and Saxena, B K and Das, B N (1968) Non-fusion joining of aluminium. In: UNSPECIFIED. Bashforth, G Reginald (1961) The Future of Electric Furnaces in the Metal Industries of India. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Basu, G S and Sharma, R P and Dhillon, A S (1996) Dust Collecting Technologies for Blast Furnace and Steel Melting Shops. In: UNSPECIFIED. Batra, N K (1990) Mathematical Modelling of Shaft based direct Reduction processes of Iron manufacture with Recirculation of Moisture free flue Gases. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedpur. Behera, S K and Sukla, L B and Mishra, B K (2010) Leaching of nickel laterite using fungus mediated organic acid and synthetic organic acid: a comparative study. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Beisembetov, I K and Kenzhaliev, B K and Zakharova, N A and Dosymbaeva, Z D (2010) Study and development of advanced technology for silver sorption recovery from multicomponent leaching solutions. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Berg, Frenk van den and Yang, Haibing (2011) Real-time Meniscus Level and Slag Thickness Measurement by RADAR. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Berg, Frenk van den and Yang, Haibing (2011) Real-time Meniscus Level and Slag Thickness Measurement by RADAR. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Berry, J G (1957) Refining of Non-Ferrous Metals. In: UNSPECIFIED. Besra, L and Sengupta, D K and Roy, S K (2010) Influence of flocculant overdosing on solid/liquid separation properties. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Bhagat, R P (1991) Application of Statistical Analysis in Sintering and Blast Furnace Iron Making. In: International Conference on Advances in Chemical Metallurgy, Jan 9-11, 1991, BARC, Mumbai. Bhagat, R P (1997) Effect of flux granulometry and other process variables on the sintering of iron ore at high basicity. In: Processing of fines: Proceedings of the national seminar, Jan 9-10, 1997, NML Jamshedpur, India. Bhagat, R P (2007) Improved gravity separation : typical case studies in relation to slimes. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur. Bhagat, R P (2011) Improvement in Quality Parameters of Super-Fluxed Sinter from Indian Iron Ores: NML’s Experience. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India. Bhagat, R P (2011) Inter-influencing factors in affecting BF coke rate – statistical approach. In: Proc. : Inter. Conf. on Energy Efficiency in Steel Industry (EESI-2011), Org. by SAIL-RDCIS Ranchi, Bureau of Energy Efficiency Min. Of Power, Gov. of India New Delhi, Indian Institute of Metals, Ranchi Chapter, December 14-16, 2011, Ispat Bhawan, Ranchi. Bhagat, R P (2011) Modeling of air flow through sinter mix bed. In: Proc. : Inter. Conf. on Mathematical Modelling and Application to Industrial Problems (MMIP-2011), Org. by Dept of Mathematics, March 28-31, 2011, National Institute of Technology, Calicut , Kerala . Bhagat, R P (1985) Performance Analysis of a Blast Furnace at Bhilai Steel Plant. In: International Conference on Progress in Metallurgical Research: Fundamental and Applied Aspects, Feb, 1985, IIT Kanpur, India. Bhagat , A N and Pabi, S K and Ranganathan, S and Mohanty, O N (2004) Prediction of Solubility of Carbonitrides in High Strength Low Alloy Steel. In: Second International Conference on advance structural Steels (ICASS-2004), 2004, China. Bhagiradha Rao, E S and Pal, A T (1969) The applicability of size-factor and electron concentration concepts to alloying behaviour of copper. In: UNSPECIFIED. Bhagiradha Rao, E S and Pal, A T (1969) Effects of cooling rate on the formation of kappa phase in the CU-AI-Ni-Fe-Mn system. In: UNSPECIFIED. Bhagiradha Rao, E S and Pal, A T (1968) Effects of Cooling Rate on the Formation of Kappa Phase in the Cu-Al-Ni-Fe-Mn System. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Bhakta, U C (1998) Power Plant Component Failures Investigation and Remedial Measures. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur. Bhanawat, S C and Ramarao, V V and Vishwanath, U (2010) Development of a fast and accurate method for testing of nigrosine. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Bhardwaj, O P and Bandyopadhyay, A and Khare , R N and Rao, T C (1985) Improvement in Grinding and Classification Circuit by the use of Hydrocone at Rakha Concentrator. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpur. Bharti, Amishi and Kumar, Gautam and Sinha, Moni and Chakraborty, D S (2010) Characterization of sinter return fines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Bhaskar, Udaya and Govindarajan, B and Barnwal, J P and Rao, T C and Rao, K K (2000) Performance Evaluation of Water-Injection Cyclone Treating a Synthetic Mixture. In: UNSPECIFIED. Bhaskar Raju, G and Prabhakar, S and Hanumantha Rao, K and Sankaran, C and Forsling, Willis (1991) Utilisation of Mineral Slimes and Industrial Waste by Electro Flotation and Selective Flocculation. In: Mineral Development and Environment, 28-30 November 1991, Dhanbad, India. Bhaskar Raju, G and Prabhakar, S and Jolly Kutty, K G and Khangaonkar, P R and Sankaran, C (1991) Cold bonded pelletization of iron ore fines. In: Third Int Symposium on beneficiation and agglomeration, 16-18 January 1991, Bhubaneswar. Bhaskar Raju, G and Prabhakar, S and Khangaonkar, P R (1988) Beneficiation of Low Grade Ores by Electro-Column Flotation Technique. In: Column Floation "88", January 25-28, Phoenix, Arizona, USA. Bhaskar Raju, G and Prabhakar, S and Khangaonkar, P R (1988) Studies on the beneficiation of copper oxide minerals. In: XVI International Mineral Processing Congress, June 5-10, 1988, Stockholm. Bhaskar Raju, G and Prabhakar, S and Mehrotra, S P and Vora, S B (2005) Circuit simplification by adopting flotation columns. In: Emerging Trends in Mineral Processing and Extractive Metallurgy, 13-14 June, 2005, Bhubaneswar. Bhaskar Raju, G and Prabhakar, S and Sankaran, C and Vora, S B (1997) Pilot scale studies on the beneficiation of complex sulphides by flotation column. In: Recent advances in metallurgical processes, 16th-19th July 1997, Bangalore. Bhaskar Raju, G and Prabhakar, S and Subba Rao, S and Sankaran, C (1999) Beneficiation of Gold Ore by Flotation Column: A Pilot Scale Study. In: Beneficiation, agglomeration and environment, 20-22 January 1999, Bhubaneswar. Bhatia , B S and Singh, Janardan (1997) Some Aspects of Tubes Galvanising and Practice at 'Tubes Division' of 'Tata Steel'. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur. Bhatnagar, Deepak and Biswas, Soumitra (1996) Environment and Waste Management in Metallurgical Industries - Role of databases. In: UNSPECIFIED. Bhatnagar, Deepak and Jancy, A (1998) Cobalt recovery from Metallurgical Wastes of Zinc Industry. In: UNSPECIFIED. Bhatnagar, P P and Banerjee, T (1957) Vaccum - A New Tool in Extractive Metallurgy. In: UNSPECIFIED. Bhatnagar, S S and Kaushal, D D (1957) Lattice Diffusion in Face-Centered Cubic Metals. In: UNSPECIFIED. Bhattacharjee, S (1994) Chemometrics in Analytical Chemistry. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA 1994), January 18-20, 1994, National Metallurgical Laboratory Jamshedpur. Bhattacharjee, S and Bhattacharyya, G and Dasgupta, P and Mitra, A (1999) Amendment of flyash by vermitechnology for agricultural application. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Bhattacharjee, S and Dasgupta, P and Kar, D and Bhattacharjee, R N (2000) A New process for the enrichment of nickel in Sukinda chromite overburden ore. In: UNSPECIFIED. Bhattacharya, D K (1997) Failures of welded joints. In: UNSPECIFIED. Bhattacharya, D K (1999) Magnetic NDT for the characterization of industrial materials. In: UNSPECIFIED. Bhattacharya, D K (1995) Microstructure of Welded Joints. In: Experimental Techniques in Industrial Metallography [ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory (CSIR), Jamshedpur. Bhattacharya, D K (2001) Non-Destructive Techniques for Microstructural and Structural Characterisation. In: UNSPECIFIED. Bhattacharya, D K (2001) Non-destructive techniques for microstructural and structural characterisation. In: UNSPECIFIED. Bhattacharya, D K (1995) Non-Destructive Test Techniques for Boiler Systems. In: Proceedings of National Workshop on Boiler Corrosion (NWBC-95), April 11-12, 1995, NML, Jamshedpur. Bhattacharya, H P and Debnath, P C (1969) Polographic Analysis of Zinc ore concentrates for the determination of Lead, Copper, Cadmium and Zinc. In: UNSPECIFIED. Bhattacharya, M and Ghosh, M and Das, S K and Mahato, B (2009) Synthesis and characterization of superparamagnetic Co & CoNi particles. In: TMS 2009 138th Annual Meeting & Exhibition - Supplemental Proceedings, Feb, 2009, TMS. Bhattacharya, Sumantra and Dey, Shobhana (2010) An operator friendly performance index for frother selection and optimization in coal flotation. In: UNSPECIFIED. Bhattacharya, U K and Gupta, B K (1959) Basic Electric Furnace Practice for Low Alloy Steels. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Bhattacharyya, A K (1968) Reclamation of Copper Base Scrap and Residues. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Bhattacharyya, A K (1969) Reclamation of copper-base scrap and residues. In: UNSPECIFIED. Bhattacharyya, H P (1968) Polarographic Analysis of Zinc Ore Concentrates for the Determination of Lead, Copper, Cadmium and Zinc. In: Symposium on Non-ferrous Metals Technology : Paper for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory(CSIR) Jamshedpur. Bhattacharyya, K K and Reddy, P S R and Kumar, S G and Sastri, S R S and Narasimhan, K S (1985) Characterisation and Beneficiation of some Indian Coal Fines. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Bhattacharyya, P and Bhattacharyya, K K and Kumar, V and Nayak, B and Mohandas, P N and Vidyadhar, A and Swamy, Narayana and Chattoraj, U S and Maulik, S C (2006) Studies on Medium Grade Ilmenite-Depleted Beach Placer deposit of Chavakkad Ponnani Coast, Kerala. In: International Seminar on Mineral Processing Technology (MPT-2006), March 8-10, 2006, Chennai. Bhattacharyya, P and Chakrabarti, D M and Sarkhel, B R and Saha, P and Chattoraj, U S and Banerjee, B (1997) Modified hydrocycloning for effective elimination of stubborn slimes. In: UNSPECIFIED. Bhattacharyya, P and Chattoraj, U S and Saha, P and Sarkhel, B R and Chakrabarti, D M (1998) Salvaging the values from the rejects of a by-product recovery plant. In: UNSPECIFIED. Bhattacharyya, P and Dasgupta, P and Kar, D and Bhattacharjee, R N and Ghosal, S and Paul, A R (2000) A New process for the Enrichment of Nickel in Sukinda Chromite Overburden ore. In: UNSPECIFIED. Bhattacharyya, P and Ghosh, S R and Srivastava, J P and Sinha, P K and Sengupta, S K and Maulik, S C (1997) Beneficiation studies on Bolani iron ore. In: UNSPECIFIED. Bhattacharyya, P and Sarkhel, B R and Chakrabarti, D M and Saha, P and Ghosh, S R and Chattoraj, U S (1996) Gravity Separation at Variable 'g' for Management of Mineral Wastes and Pollution. In: UNSPECIFIED. Bhattacharyya, P and Sarkhel, B R and Chakrabarti, D M and Saha, P and Ghosh, S R and Chattoraj, U S (1996) Gravity separation at variable 'g' for management of mineral wastes and pollution. In: UNSPECIFIED. Bhattacharyya, P and Sil, S K and Saha, P and Maulik, S C (2000) Recovery of values from barite sludge using Multi-gravity Separator. In: UNSPECIFIED. Bhattacharyya, P and Singh, R and Sil, S K and Sengupta, S K and Saha, P and Srivastava, J P and Maulik, S C (2002) Reduction of Environment Pollution in Processing of Barite. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Bhatwadekar, R G and Ramanujam, S (1953) Service Failures of Railway Materials. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Bhaya, H (1973) Speech Delivered. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, 19-21, Feb. 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Bhima Rao, R and Charan, T G and Sastri, S R S (1985) Characterisation and Response to Beneficiation of Ferruginous Chromite Ores. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Bhoi, B and Murthy, B V R and Datta, P and Rajeev, and Jouhari, A K (1997) Studies on Aluminothermic Reduction of Manganese ore for Ferro-Manganese Making. In: UNSPECIFIED. Bhuniya, A K and Datta, S and Chattopadhyay, P P and Banerjee, M K (2002) Effect of Trace Addition on the Microstructural Degradation of Cu-Zn-AI Shape Memory Alloy. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Bishop, Tom (1958) Recent Developments in Alloy and Special Steels in Great Britain. In: Symposium on Production, Properties & Applications of Alloy & Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Biswas, A K (1998) Role of Characterisation in Mineral Seperation by Froth Flotation. In: Workshop on Froth Flotation: Recent Trends, September 22-24,1998, RRL Bhubaneswar. Biswas, D K and Goswami, N G (2003) Technology Evaluation : Experience and Few Case Studies. In: UNSPECIFIED. Biswas, P K (1998) Manufacturing Processes of Polymer Matrix Composite Material for Aerospace Application. In: UNSPECIFIED. Biswas, S C (1958) Practical Problems in the Manufacture of Alloy Steel. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Biswas , P K and Dev, S C and Krishnan, C S S (1998) Some Critical Issues in the Processing of Magnesium Alloys & Composites. In: UNSPECIFIED. Blackburn, L D and Bonanno, F R and Burte, H M and Herzog, J A and Stuhrke, W F (1966) Metal matrix composite materials. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Borah, Sarat Ch and Das, Manash R and Tamuly, Chandan (2010) Characterization of graphite deposits of Arunachal pradesh. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Bose, B N (1966) Aluminium foil for electrical windings. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Bose, S C and Singh, K and Sarma, D S (2008) Effect of service simulated ageing on microstructure and creep rupture properties of I CrMoV (Casing Casting) steel vis-a-vis remnant life assessment in view of latent creep strength. In: UNSPECIFIED. Boteva, Antoaneta (2000) New Reagent for Fine Gold Recovery during Copper Ores Processing. In: UNSPECIFIED. Brandes, Guenther and Rausch, Hans (1959) The Role of Mixing Methods and Mixer Designs in the field of Iron Ore Sintering. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Bricarelli, G (1959) International Metallurgical Classification : a Tool for Increasing, Efficiency in the Exchange of Experience in Iron and Steel Field. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Broniewska, C and Mitra, M S (1953) Photoelastic Method for Stress Analysis. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Buche, S D and Prakash Rao, M S (1985) Beneficiation of Iron ore Slimes. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Bucknall, E H (1958) Alloy Steels- Technical and Economic Background. In: Symposium on Production , Properties & Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Bucknall, E H (1957) Chromium - An Appreciation. In: UNSPECIFIED. Bucknall, E H (1953) Some aspects of the Flow & Fracture of Metals in Test & Service. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Bucknall, E H and Mitra, M S (1957) Utensils-The Major Non-Ferrous Industry of India. In: UNSPECIFIED. CCa, To Duy (1998) Effect of Molybdenum on the Formation of Carbides and Phases Structure of 12Cr20Ni38Mo5-Alloy. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur. Ca, To Duy (1998) Effect of Rare Earth Metals Injection & Gas Stirring on Cleanliness of Pipeline Steel. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur. Ca, To Duy (1998) Effect of Rare Earth Metals on Sulphide inclusion in Pipeline Steel. In: Non-metallic inclusion in Steels, 1998, NML, Jamshedpur. Ca, To Duy (1998) Influence of Rare Earth Metals on Macrostructure of Continuously Cast Steel Rolling Pipe. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur. Ca, To Duy (1998) Influence of Rare Earth Metals on Mechanical Properties of Pipeline Steel. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur. Ca, To Duy (1998) Influence of Rare Earth Metals on Non-Metallic Inclusions in Cast Alloy Steels. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur. Ca, To Duy (1998) Precipitation and Gp-Zone Structures in AlZnMg(Cu, Zr) Alloys. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur. Ca, To Duy (1998) The use of Rare Earth Metals for Modification of Non-Metallic inclusions in Silicon Steel. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur. Cadambe, V (1958) Application of Alloy Steels to Aircraft Industry. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Callender, W (1959) Studies in the Sintering Permeability and Pellet Strength of Australian Hematite Ores. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Chakrabarti, D M (2003) Customer Feedback in R&D Business. In: UNSPECIFIED. Chakraborty, Debarun and Goswami, M C and Bhagat, R P (2010) Effect of process variables on sintering indices in relation to high LOI hematite ore fines of Gua mines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Chakravarty, S and Bhattacharyya, P and Chatterjee, S S and Singh, B N (2000) Utilisation of Iron ore Fines in Alternative Iron making processes - An Indian perspective. In: UNSPECIFIED. Chakravarty, T K and Panigrahi, S K (1996) Strategies for Solid Waste Management in SAIL Steel Plants. In: UNSPECIFIED. Chakravorty, N (1989) Magnetic Separation. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri. Chakrovorty, N (1989) Mineralogy - Its Application in Mineral Benficiation. In: Third Short Term Refresher Course on Classificiation and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri. Chandhok, Vijay K and Finlay, Walter L and Hubert, Paul (1961) The Status of Titanium in 1961-A New Structural Metal Starting Its Second Industrial Decade. In: Symposium on Light Metal Industry in India, Feb. 14-17, NML, Jamshedpur. Chandra Dube, Mahendra (1957) Extraction & Refining of Aluminium. In: UNSPECIFIED. Chandramouli, V A and Balaramamoorthy, K and Kumar, J S (1968) Eddy Current Testing of Zircaloy Wires. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec. 1968, CSIR - National Metallurgical Laboratory, Jamshedpur. Chandramouli, V A and Moorthy, K Balarama and Kumar, J S (1969) Eddy Current Testing of Zirconium Wires. In: UNSPECIFIED. Chandraprabha, M N and Natarajan, K A (2010) Biomodulation of mineral surfaces for selective separation of pyrite from chalcopyrite: a ftir study. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Chandrasekhar, S (2000) Chemical, Mineralogical and Morphological Characterisation of kaolinitic clays. In: UNSPECIFIED. Chandrasekhar, S and Sarkar, B and Das, Avimanyu and Chattoraj, U S and Kumar, Vinod and Rao, K V and Bhattacharyya, K K (2007) Analysis of the washability characteristics of low-volatile Indian coking coal with crushing at different top sizes - a case study. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur. Chandwani, H K and Vishwanathan, V and Mahadevan, H (1998) Environmental Issues to be Addressed in Indian Alumina Refineries and their Possible Solutions. In: UNSPECIFIED. Chandwani, R and Timbrell, C M and Wiehahn, M A (2008) Crack modelling in power plant components. In: UNSPECIFIED. Charles, J A (1959) Iron Pretreatment Research. In: Symposium on Iron & Steel Industry in India organised by the NML, Aug.'1959, NML, Jamshedpur. Chatterjea, A B (1973) On Some Fundamental Aspects of Operational Parameters of Direct Reduction in Rotary Kiln. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Chatterjea, A B (1960) Pyrometallurgical Pilot Plants. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamedepur. Chatterjea, A B (1953) Some Aspect of Service Failures at Elevated Temeratures. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Chatterjea, A B (1959) Technological Aspects of Low Shaft Furnace Process. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Chatterjea, A B and Nijhawan, B R (1959) Low Shaft Furnace Smelting of Pig Iron in India. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Chatterjea, A B and Nijhawan, B R (1957) Thermodynamic aspects of chemical Reactions, as applied to the smelting & Refining of lead. In: UNSPECIFIED. Chatterjee, Amit (1990) Modelling of Rotary Kiln based Direct Reduction. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedpur. Chatterjee, Amit (1973) On Some Aspects of Basic Oxygen Steel Making with Prereduced Pellets. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Chatterjee, Amit (1994) The Role of Charge Materials in Alternative Routes to Steel. In: UNSPECIFIED. Chatterjee, D P (1968) Role of Indian Ordnance Factories in the Development of some of the Important Cast and Wrought Aluminium Alloys during the last three decades. In: Symposium on Non-ferrous Metals Technology:Papers for Presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory(CSIR), Jamshedpur. Chatterjee, D P and Moghe, D Y (1968) Role of Indian ordnance factories in the development and manufacture of some of the important cast and wrought aluminium alloys during the last three decades. In: UNSPECIFIED. Chatterjee, G P (1958) Development of Creep-Resistant Alloy Steels. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Chatterjee, G P (1959) Some Recent Trends on Iron and Steel Research and Control Methods. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Chatterjee, Kakali (2003) Rural Markets for Technologies - Present Indian Scenario. In: UNSPECIFIED. Chatterjee, S and Bhagat, A N and Gope , N (2002) Development of Semi-Processed Steels for Electrical Lamination Applications at Tata Steel. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario(ROMM-2002), Oct. 24 & 25, 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Chatterjee, U K and Sircar, S C and Banerjee, T (1969) Stress corrosion cracking of copper-manganese alloys-effect of some chemical variables. In: UNSPECIFIED. Chatterjee, U K and Sircar, S C (1968) Stress Corrosion Cracking of Copper-Manganese Alloys-Effect of Some Chemical Variables. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Chattopadhyay, A (1997) Characterisation of Apatite and secondary Phosphate Minerals in Sukulu Phosphatic Soil, Uganda. In: UNSPECIFIED. Chattopadhyay, A (1997) Characterisation of apatite and secondary phosphate minerals in Sukulu phosphatic soil, Uganda. In: UNSPECIFIED. Chattopadhyay, R (1966) Improved mild steel for structural purposes. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Chattopadhyay, S (1990) Modeling Techniques for the Prediction of Phase Diagrams. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedpur. Chattopadhyay, U S and Gouri Charan, T and Kabiraj, S K and Haldar, D D (2010) Multi product beneficiation of non-coking coal from eastern coalfields—a case study. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Chattoraj, I (2007) Fundamentals of corrosion and its prevention. In: UNSPECIFIED. Chattoraj, I (1997) Industrial corrosion failure: Case studies. In: UNSPECIFIED. Chattoraj, I (2001) Notch effects in corrosive failure. In: UNSPECIFIED. Chattoraj, I (2001) Notch Effects in Corrosive Failure. In: UNSPECIFIED. Chattoraj, I and Mitra, A (1996) Micromagnetic studies on hydrogenated steel. In: Trends in NDE science and technology - Proceedings of the 14th world conference on NDT, 1996, 14th WCNDT. Chattoraj, I and Mitra, A (1998) Structure-electrochemical correlations in amorphous and devitrified Fe-based ferromagnetic alloys. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India. Chaturvedi, Hema T and Chakravarty, S and Bhattacharjee, S and Mandhyan, A K (2007) Goethite-arsenite interaction study to understand groundwater arsenic mobilization in the Bengal Delta Plain. In: Water-Rock Interaction, Proceedings, 2007, Water-Rock Interaction. Chaturvedi, P S (1968) On the Calculation of Economic cross-section for large D.C. busbars. In: UNSPECIFIED. Chaturvedi, P S (1968) On the Calculation of Economic current Density of Aluminium Cell Busbars. In: Symposium on Non-ferrous Metals Technology: Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory(CSIR), Jamshedpur. Chaudhary, P N (2003) Transfer of know-how, the need for a holistic approach. In: UNSPECIFIED. Chaudhary, P N and Minj, R K and Goel, R P (2007) Development of a Process for Dephosphorisation of High Carbon Ferromanganese. In: Innovations in Ferro Alloys Industry, INFACON XI, 2007, India. Chaudhary, P N and Pal, J (2002) An Overview of Treatment of Steel-Making Slag for Recovery of Lime Phosphorus Values. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Chaudhary, S K (2001) Investigation of Corrosion Affected Concrete Structures-A Systematic Approach. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Chaudhary, S K and Chaturvedi, A K (2001) Preventive and Protective Solution for Corrosion in Concrete through Chemistry. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Chaudhary, S K and Kurmaiah, N and Ghoshal, B T (2001) Performance of Concrete Exposed to Corrosive Environment. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Chaudhuri, B and Das, P P (1968) Effect of different variables on the precipitate-free zones adjacent to grain boundary regions on convention- ally quenched and aged Ai-Zn-Mg alloys. In: UNSPECIFIED. Chaudhuri, B and Das, P P (1968) Effect of different Variables on the Precipitate free Zones Adjacent to Grain Boundry Region in Conventionally Quenched and Aged AI-Zn-Mg Alloys. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Chaudhuri, S (2008) Creep and life assessment of engineering components in power plants and process industries. In: UNSPECIFIED. Chaudhuri, S (1995) Life Prediction of Boiler Tubes in Corrosive Environments. In: Proccedings of the National Workshop on Boiler Corrosion (NWBC-95), April 11-12, 1995, NML, Jamshedpur. Chaudhuri, S and Singh, Raghubir (1997) High temperature boiler tube failures: case studies. In: UNSPECIFIED. Chaudhuri, S P (2002) Microalloyed Steel: Its Enhancement in Properties by Thermomechanical Processing- A Case Study. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Chaudhuri, S P and Mishra, K K and Ramachandrarao, P (2000) Dry gas cleaning system for cupola : From concept to commissioning - A case study. In: UNSPECIFIED. Chaudhuri, S P and Mishra, K K and Ramachandrarao, P (2000) Dry gas cleaning system for cupola : from concept to commissioning - a case study. In: UNSPECIFIED. Chaudhuri, Sanjay and Singh, K M P and Sharma, K K and Haldar, D D (2010) Beneficiation of coking coal fines lying in washery lagoons by froth flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Chaudhuri, Sulochana and Pandey, H D (1996) Advanced Instrumental Techniques for the Analysis of Trace Metals Released from Steel Industry with Special Reference to use of ICP-AES. In: UNSPECIFIED. Chawngte, Rimi Lalrinpuii and Khatri, Varsha (2010) Prospect of non/heat recovery coke oven plant in India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Chennakesavulu, K and Bhaskar Raju, G and Prabhakar, S (2007) Adsorption of Oleic Acid on Calcium Minerals. In: Mineral Processing Technology- 2007, 22-24 February 2007, Mumbai. Cherian, T V (1959) Columbium-Boron High-Tensile Steel. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Chernykh, S I and Korshunov, V V (2000) Creation of Column Flotation Cells of Large Volume Chambers and their Industrial Applications. In: UNSPECIFIED. Chopra, K L (2004) Nano-Materials and Nano-Technology. In: The excerpts of the lecture delivered by Prof. K. L. Chopra, 24/01/2003, Jamshedpur. Choubey, Pankaj K and Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2010) Leaching studies for the recovery of tin from the solder of waste printed circuit boards. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Choubey, R and Choudhuri, S and Das, B N and Nijhawan, B R (1966) Research and development work on substitute electrical resistance alloys for heating elements. In: Symposium on Metallurgy of Substitute ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Choubey, R and Nijhawan, B R and Gupte, P K and Das, B N and Bhatnagar, S S and Prasad, K (1966) Development of substitute high temperature creep resistant alloys. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Choudhuri, K C (1966) Indigenous substitution of import ed materials on Indian Railways. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Choudhuri, K C (1961) Possible Use of Light Alloys on Indian Railways. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Choudhuri, K C (1968) Role of Non-ferrous Metals and Alloys in Railway Engineering. In: Symposium on Non-ferrous Metals Technology : Paper for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory(CSIR) Jamshedpur. Choudhury, K C (1968) Role of non-ferrous metals and alloys in Railway Engineering. In: UNSPECIFIED. Choudhury, V N (1994) Chemical Phase Analysis. In: Proceedings of the Workshop on Modern Methods of Analysis for Minerals Metals and Pollutants (MMCA 1994), Janurary 18-20, 1994, National Metallurgical Laboratory, Jamshedpur. Coffer, L Wallace (1969) Extractive metallurgy Techniques possibly applicable in India. In: UNSPECIFIED. Coheur, P (1959) On the Bottom Blown Processes and the LD-AC Process. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Colclough, T P (1959) Developments in Blast Furnace Practice. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Collcutt, R H (1959) Operational Research in the Iron and Steel Industry. In: Symposium on Iron & Steel Industry in India organised by the National Metallurgical Laboratory, August '1959, NML, Jamshedpur. Cotton, R F and Franklin, A W (1953) Some Service Failures arising from Various Types of Corrosion. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Crafts, Walter and Hilty, D C (1958) Deoxidation and Inclusion Control for Alloy Steel. In: Symposium on Production, Properties and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. CSIR, (2010) CSIR Technofest - 2010: Theme 12: Mining, Minerals & Materials. In: CSIR Technofest - 2010, 14-27 November, 2010, New Delhi. (Unpublished) DDanaiah, B and Bandyopadhyay, A and Kudbi, G K and Rao, T C (1985) Improvement of Filter Capacity through process Analysis at Rakha concentrator of Hindustan Copper Limited. In: Proceedings of National Seminar on Mineral Processing and IX Annual Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpur. Dar, K K (1957) Beryllium, Lithium & Magnesium & their Alloys, with Reference to the possibility of their Manufacture in India. In: UNSPECIFIED. Das, Samar (1995) Specimen Preparation for Electron Microscopy. In: Experimental Techniques in Industrial Metallography [ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR), Jamshedpur. Das, A K and Mukherjee, T (1996) Optimisation of Ferro Alloy Usage in Steelmaking. In: UNSPECIFIED. Das, Avimanyu and Vidyadhar, A and Dey, S K (2009) Modeling of Fine Coal Processing in a Teeter Bed Separator. In: International Seminar on Mineral Processing Technology (MPT-2009) , October 28-30, 2009, IMMT, Bhubaneshwar. Das, B and Reddy, P S R and Bhoumik, S K and Sengupta, D K and Ansari, M I (1985) Possibility of Recovering Iron Fines from Tailings by Hydrocyclone. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Das, B N (1966) Economic uses and substitution of non-ferrous metals and alloys. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Das, B N and Banerjee, S K (1966) Scope of aluminium base bearing alloys. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Das, B N and Mitra, M S (1953) Residual Stress & its Effect on Service. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Das, Goutam (1997) Failure analysis of a steam turbine casing. In: UNSPECIFIED. Das, Goutam (1999) Image analysis in quantitative metallography. In: UNSPECIFIED. Das, Manash R and Sarma, Jyotirmoy and Sarma, Namrata and Mahiuddin, Sekh (2010) Characterization and ion specificity of the iron ore beneficiation waste. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Das, S (1997) Metallography in failure prediction: an in-situ approach. In: UNSPECIFIED. Das, S K (1968) Recent Developments in Slag-Fuming Process. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec. I968, National Metallurgical Laboratory (CSIR), Jamshedpur. Das, S K and Godiwalla, K M and Mehrotra, S P (2006) A Mathematical Model to Characterize Volatile Matter Evolution during Carbonisation in Metallurgical Coke Ovens. In: International Symposium on Environment Friendly Technology in Mineral Processing and Metal Extraction (AETMME-2006), Nov, 2006, AETMME-2006. Das, S K and Kumar, Sanjay and Singh, K K and Ramachandrarao, P (1996) An Innovative approach towards utilisation of wastes generated from iron & steel industries. In: UNSPECIFIED. Das, S K and Kumar , Sanjay and Singh, K K and Ramachandrarao, P (1996) An Innovative Approach towards Utilisation of Wastes Generated from Iron & Steel Industries. In: UNSPECIFIED. Das, S K and Sarkar, S (1969) Recent developments in Slag-fuming process. In: UNSPECIFIED. Das, S N and Thakur, R S and Ray, H S (1998) Red Mud Pollution Problems : Some observations. In: UNSPECIFIED. Das, Samar (1999) Metallographic sample preparation techniques. In: UNSPECIFIED. Das, Suchandan K (2011) Mathematical Modelling of Carbonisation Process in Stamp Charged Coke ovens. In: International Conference on Coal & Coke - 2011, April 7-8, 2011, Tata Steel, Jamshedpur, India. Das, Suchandan K and Das, Rashmita (2010) A Mathematical Model To Characterize Erosion Behaviour Of Boiler Grade Steels Impacted By Fly Ash In Coal Fired Power Plants. In: MS’10 Prague Proceedings of the International Conference on Modelling and Simulation 2010, 22 – 25 June 2010, Prague, Czech Republic. Das, Suchandan K and Godiwalla, K M (2006) Heat transfer characterization in the mould of a high speed continuous steel slab caster. In: 18th National & 7th ISHMT-ASME Heat and Mass Transfer Conference, Jan, 2006, IIT Guwahati. Das, Suchandan K and Godiwalla, K M and Hedge, Shubha S and Mehrotra, S P and De, P K (2006) A stochastic model for prediction of Erosion-oxidation interaction on boiler grade steel Surfaces. In: Proceedings of International Conference on Industrial Tribology – 2006, Nov 30-Dec 02, 2006, Indian Institute of Science, Bangalore, India. Das, Suchandan K and Godiwalla, K M and Hegde, Shubha and Mehrotra, S P and Dey, P K (2006) A stochastic model for prediction of Erosion-oxidation interaction on boiler grade steel Surfaces. In: Proceedings of International Conference on Industrial Tribology – 2006, Nov 30-Dec 02, 2006, Indian Institute of Science, Bangalore, India. Das, Suchandan K and Godiwalla, K M and Mehrotra, S P (2006) A mathematical model to characterize volatile matter evolution during carbonisation in metallurgical coke ovens. In: International Symposium on Environment Friendly Technnology in Mineral Processing & Metal Extraction (AETMME-2006), 1-3 November, 2006, Bhubaneswar, India. Das, Suchandan K and Godiwalla, K M and Panda, Lopamudra and Bhattacharyya, K K and Singh, Ratnakar and Mehrotra, S P (2006) Mathematical modeling of separation behaviour of a spiral for washing high ash coal. In: International Symposium on Environment Friendly Technnology in Mineral Processing & Metal Extraction (AETMME-2006), 1-3 November, 2006, Bhubaneswar, India. Das, Suchandan K and Godiwalla, K M and Panda, Lopamudra and Bhattacharyya, K K and Singh, Ratnakar and Mehrotra, S P (2007) Mathematical modelling of bagnold effect and separation behavior of a coal-washing spiral using a mechanistic approach. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur. Das, Suchandan K and Kumari, Preeti and Bhattacharyya, K K and Singh, Ratnakar (2010) A mathematical model to characterize separation behavior of a spiral for processing iron ore using a mechanistic approach. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Das, Suchandan K and Kumari, Preeti and Bhattacharyya, K K and Singh, Ratnakar (2010) A multi-input multi-output artificial neural network model to predict the separation characteristics of iron ore by a magnetic separator. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Das, Suchandan K and Kumari, Sabita (2010) A Multi-Input Multi-Output Neural Network Model To Characterize Mechanical Properties Of Strip Rolled High Strength Low Alloy (HSLA) Steel. In: MS’10 Prague Proceedings of the International Conference on Modelling and Simulation 2010, 22 – 25 June 2010, Prague, Czech Republic. Das, Swapan K and Godiwalla, K M and Panda, Lopamudra and Bhattacharya, K K and Singh, Ratnakar and Mehrotra, S P (2006) Mathematical Modelling of Seperation Behaviour of a Spiral for Washing high ash Coal. In: International Symposium on Environment Friendly Technology in Mineral Processing and Metal Extraction (AETMME -2006), Nov, 2006, AETMME -2006. Das, Swapan K and Kumar, S and Singh, K K and Shah, R G (1997) Some studies on olivine fines and clay mixtures. In: UNSPECIFIED. Das, Swapan K and Mohanty, J K and Acharya, B S and Muralidhar, J and Rajeev, and Kanungo, S B and Sahoo, R K (1997) Physico-Chemical Characterisation of Lateritic Nickel Ores of Sukinda, Orissa. In: UNSPECIFIED. Das , Debdulal and Chattopadhyay, P P (2002) A Study on the effect of Martensite Morphology on Mechanical Properties of High-Martensite Dual- Phase Steels. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Das Biswas, Rupa and Upadhyay, A K and Kumari, Rashmi and Mohanty, A K and Gupta, K K and Konar, J and Chakravarty, S (2010) Uncertainty of measurement for determination of major elements in iron ore using ICP-OES. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Das Gupta, N N and Banerjee, S and Chatterjee, N N (1960) Pilot Plant Studies on the Production of Metallurgical Coke. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedepur. Das Gupta, N N and Lahiri, A (1959) The size requirement of Blast Furnace Coke (1). In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Das Gupta, N N and Shrikhande, K Y (1959) The Problem of Supply of Coal for the New Steel Plants. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Das Gupta, S and Agrawal, J C and Roy, B (1973) Application of Solid Reductant Processes for Direct Reduction in India. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Dasgupta, S S (1999) Studies on Kolaghat Thermal Power Station fly ash with a view to set up a mechanised brick plant. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Dastur, M N and Lalkaka, R D (1959) The Design of Continuous Casting Plants for India. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Dastur, M N and Parthasarathy, C R and Roy, T K (1973) The Future of Direct Reduction Processes. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Datta, S and Deb, P and Bandyopadhyay, N R and Banerjee, M K (1998) Reinforcing age Hardenable Al-Cr Matrix Alloy In-Situ and by SiC/Al2O3. In: UNSPECIFIED. Dayal, P (1961) The Prospects of Aluminium in India. In: Symposium on Light Metal Industry in India, Feb. 14-17, NML, Jamshedpur. Dayal, R and Singh, Akhileshwar (1985) Search for Technology to Maximise Pyrite utility in Bihar. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Dayal, V and Pan, S K and Mukherjee, S K and Rai, S (2010) Commercial utilization of waste/low-grade iron ore fines in SAIL mines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. De, T C (1985) Some Observations on the Beneficiation of Lean Phosphate rock from Indigenous Resources. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Desai, P K (2001) Life Extension of Aircraft Components - An IAF Perspective. In: UNSPECIFIED. Descovich, S and Pompilo, L (1959) Impact of Wire Rod Rolling Mill Mechanisation on Job Requirements. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Deshpande, K G (1998) Use of spent Potlining from the Aluminium Electrolytic cell as an additive to Arc Furnace Steel Melting and Cupola iron Melting in Steel industries. In: UNSPECIFIED. Dev, S C (1953) Some Characteristic Service Failures of Rails. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Dev, S C (1953) Some Observations on Failures in Aircraft Engines & Fuselage Parts. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Dey, Shobhana and Bhattacharya, Sumantra (2010) A new approach to performance optimization in coal flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Dey, Shobhana and Bhattacharyya, K K (1997) Response of mineral separator for fine coal beneficiation. In: UNSPECIFIED. Dey, Sujit Kumar and Vidyadhar, A and Das, Avimanyu (2010) Study of progeny particle size distribution in an impact hammer mill. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Dey, U K and Mishra, S C and Dutta, S K and Tiwary, S K (1997) Efficient use of Magnetite in Coal Beneficiation Plants for Heavy Media Separation - A case study. In: UNSPECIFIED. Dhal, B and Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D (2010) Bio-processing for metal extraction, recycling and effluent treatment- an overview. In: International Conference on Non-ferrous Metals 2010, 10-11th Aug 2010, Varanasi. Dhal, B and Abhilash, and Mehta, K D and Pandey, B D (2009) Biological remediation of trivalent chromium from effluents. In: International conference of Non-ferrous metals 2009, July 10-11, 2009, Bhubaneswar. Dhal, B and Abhilash, and Mehta, K D and Pandey, B D (2010) Microbial Bioremediation of Chromium: A promising approach of environmental microbiology. In: UNSPECIFIED. Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2011) Bioremediation of CR(VI) from Contaminated Chromite Mine Overburden Soil and its Management. In: 15th International Conference on Nonferrous Metals 2011, 8-9 July 2011, Kolkata,India. Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2010) Kinetic aspects of Cr(VI) bioremediation of water and soil contaminated from chromite mine overburden dumps. In: XI International Seminar on Mineral Processing Technology (MPT-2010), 15-17th Dec. 2010, NML Jamshedpur. Dhananjayan, N and Chakrabarti, H K and Banerjee, T (1960) Production of Manganese and Manganese Dioxide - Pilot Plant Investigations. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Dhindaw, B K and Sircar, S C (1968) Kinetics and Mechanism of Sulfation Reactions. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Dhindaw, B K and Sircar, S C (1969) Kinetics and Mechanism of Sulfation Reactions during roasting of Sulfides. In: UNSPECIFIED. Didolkar, V K and Kumar, V A and Pathak, S U and Tupkary, R H (1997) Beneficiation of low grade graphite ore from Multai area, Betul district, M.P. In: UNSPECIFIED. Digges, Thomas G (1958) Boron Steels. In: Symposium on Production, Properties and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Digges, Thomas G (1961) Research on Light Metals in the Metallurgy Division, National Bureau of Standards. In: Symposium on Light Metal Industry in India, Feb. 14-17, NML, Jamshedpur. Dighade, R R and Ambekar, S V and Pande, A M (1999) Flyash lime gypsum bricks - A boon for Vidarbha region. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Director, Deputy (1973) Vote of Thanks. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, 19-21, Feb. 1973, CSIR- National Metallurgical Laboratory, Jamshedpur. Director, NML (1964) Abstracts of papers - Symposium on utilisation of metallurgical wastes. In: Symposium on utilisation of metallurgical wastes, March 10, 1964, Jamshedpur. Director, NML (2010) NML: Glimpses of Life and Times. In: NML Diamond Jubilee Celebrations, Nov 26-27, 2010, NML Jamshedpur, India. Director, NML (1965) Symposium on micro-metallurgy. In: Symposium on micro-metallurgy - The role of minute additions to ferrous and non-ferrous metals and alloys, March 29-April 1, 1965, Jamshedpur. DRL, Kanpur, (1966) Conservation of non-ferrous metals by protective treatments and substitution by alumimium. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Dubey, R K and Das, A K and Gupte, P K and Nijhawan, B R (1966) Development of low tungsten substitute tool steels. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Dutta, J and Bhattacharya, C and Sarkar, D and Bandyopadhyay, S (2002) Influence of PH and Chloride Concentration Concentration on the Corrosion Behavior of AL-6061 Alloy. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Duy, C To (1998) Non-Metallic Inclusions in Carbon Steel Containing Rare Earth Metals. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur. Duy, P To (1998) Effect of Cao-Mgo-Re-Caf2 Synthetic Powder on Desulphurization of 12Cr20Ni38Mo5 Alloy. In: Non-metallic inclusions in steels, 1998, NML, Jamshedpur. EEastier, J (1985) International Mineral Processing and Comminution. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Engineer, B B (1973) Iron Ore Pre-Reduction. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Engineer, B B (1959) Principal mineral raw materials for iron and Steel Industry. In: Symposium on Iron & Steel Industry in India organised by the NML, August, 1959, NML, Jamshedpur. Eyre, J W (1960) Steel Melting in a Pilot Plant Shaft Furnace. In: Symposium on Pilot Plant Shaft Furnace, 15-18/02/1960, Jamshedplur. Ezz, S Y (1973) Possibilities of Production and use of Sponge Iron in the Arab Countries. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Ezz, S Y and Yousef, A A and Boulos, T R and El-Geassy, A A (1969) Magnetic roasting of some Egyptian Ferruginous Manganese Ores. In: UNSPECIFIED. Ezz, S Y and Yousef, A A and Boulos, T R and El-Geassy, A A (1968) Magnetic Roasting of Some Egyptian Ferruginous Manganese Ores. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. FFaivre, R and Bigot, R (1958) Studies on the Kinetics of very Rapid Cooling in Different Quenching Liquids- Application to Some Alloys of Iron, Nickel and Carbon. In: Symposium on Production, Properties and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Fick, N C (1953) The Influence of Stress Raisers on the Performance of Materials. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Floyd, John (1998) Pollution Control in the Non-Ferrous Industries - An Indian Perspective of Worldwide Importance. In: UNSPECIFIED. Fontana, Mars G and Mitra, M S (1953) The Eight Forms of Corrosion & the Corrective Measures. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Frias, C and Raychaudhuri, A and Palma, J and Diaz, G (2002) Development of New-Concept Clean Technologies to Extract Metals from Primary and Secondary Sources. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. GGaddu, Vinay D and Dawson, A S (2008) Case studies of failures in thermal power plant boilers. In: UNSPECIFIED. Gadsden, W R (1959) Production experience at Port Kembla with Coke made from "fine grind" Oiled Coal charges. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Gale, G E (1953) Corrosion and the Failure of Metals. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Gale , G E (1953) Corrosion in Boilers & Water Circulation Systems with Special Reference to Marine Installations. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Ganesh, R and Banerjee, S K and Narayanan, P I A (1968) Beneficiation Studies on Copper Ore Samples from Rajasthan. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Ganesh, R and Banerjee, S K and Narayanan, P I A (1969) Beneficiation studies on Copper ore samples from Rajasthan. In: UNSPECIFIED. Ganguly, M L and Ghosh, P (1968) The role of non-ferrous metals and Alloys in Electrical Engineering Industries in particular relation to cable Industries. In: UNSPECIFIED. Ganguly, M L and Ghosh, P (1968) The Role of Non-ferrous Metals and Alloys in Electrical Engineering Industries in Particular Relation to Cable Industries. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Garber, S and Sturgeon, G M (1959) Scale on Wire Rod and its Removal by Mechanical Means. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Gaur, B (1998) Effect of Surface Preparation on Corrosion of Metals and Alloys. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur. Gaur, R K and Sharma, N K and Sharma, V R (1997) Receding the entrainment of concomitant Ultrafines by MGS in Lead Concentrate of Rajpura - Dariba Concentrator. In: UNSPECIFIED. Gauvry, Robert (1968) Aluminium Contribution to Building Industrialization in France. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboraory(CSIR), Jamshedpur. Geoffroy, J and Meltzheim, C (1959) Principal aspects of investigations into fluidised carbonisation undertaken at the Marienau Experimental Station. In: Symposium on Iron & Steel Industry in India organised by the NML, Aug.'1959, NML, Jamshedpur. Ghali, Venkata Subbarao and Mulaveesala, Ravibabu (2011) Recent Advances in Non-stationary Thermal Non-destructive Characterization. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Ghandy, Jehangir (1969) Opening address. In: UNSPECIFIED. Ghaswala, S K (1961) Aluminium Structures General Aspects of Design. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Ghaswala, S K (1968) Role of Aluminium in constructional Engineering. In: UNSPECIFIED. Ghaswala, S K (1968) Role of Aluminium in Constructional Engineering. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory(CSIR), Jamshedpur. Ghaswala, S K (1957) Structural Aluminium Industry. In: UNSPECIFIED. Ghorpade, S Y (1997) Status of Ferrosilicon and Pig Iron Production by Electric Smelting under the Liberalized Economy. In: UNSPECIFIED. Ghose, H P and Krishnamachar, B S (1966) Substitution of scarce metals with special reference of standardisation in India. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Ghosh, Arpita and Das, T K and Mandal, S K and Mohan, B M (2009) Analytical Structure and Stability Analysis of a Fuzzy Two-Term Controller with Multi-Fuzzy Sets. In: Automation, Robotics & Control Systems, July 13-16, 2009, Orlando, Florida, USA. Ghosh, B and Chakraborty, P and Pal, P G and Mitra, S K (1994) Refractory Parctices in Electric Arc and Induction Furnaces. In: UNSPECIFIED. Ghosh, B N (1994) Refractories for Electric Arc Furnace. In: UNSPECIFIED. Ghosh, C and Pai, D R and Narasimham, B and Majumdar, K (1969) Benefication of low grade wolramite ore from Degana, Rajasthan. In: UNSPECIFIED. Ghosh, C and Pai, D R and Narasimham, J B and Majumdar, K K (1968) Beneficiation of Low Grade Wolframite Ore from Degana, Rajasthan. In: Symposium on Non-ferrous Metals Technology :Papers for Presentation, 4th - 7th Dec. 1968, CSIR - National Metallurgical Laboratory, Jamshedpur. Ghosh, N K and Parthasarathy, L (2002) Atmospheric Pollution Control in Coke Ovens. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Ghosh, R N (1995) Basic Principles of Physical Metallurgy. In: Experimental Techniques in Industrial Metallography [ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR), Jamshedpur. Ghosh, R N (1995) Boiler Corrosion - Metallurgical Aspect. In: Proceedings of the National Workshop on Boiler Corrosion(NWBC-95), April 11-12, 1995, NML, Jamshedpur. Ghosh, R N (1997) Failure analysis: techniques and few case studies. In: UNSPECIFIED. Ghosh, R N (2003) Identification of Novelty in R&D. In: UNSPECIFIED. Ghosh, R N (2001) Remaining life assessment of engineering components. In: UNSPECIFIED. Ghosh, R N (2001) Remaining Life Assessment of Engineering Components. In: UNSPECIFIED. Ghosh, R N (1997) Structural and component integrity. In: UNSPECIFIED. Ghosh, R N (2002) Superalloy: Processing and Performance. In: Proceedings of the Indo-Malaysian Joint Workshop (WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur. Ghosh, R N (1957) Welding of Non-Ferrous Metals. In: UNSPECIFIED. Ghosh, R N and Das, S K and Mitra, A (2008) Damage assessment of process heater tube. In: UNSPECIFIED. Ghosh, Sukomal (1995) Micro-Structural Characteristics of Cast Irons. In: Experimaental Techniques in Industrial Metallography [ETIM - 95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory (CSIR), Jamshedpur. Ghosh , R N (1990) Some Aspects of Modelling of the High Temperature Mechanical Behaviour of Nickel Base Superalloys. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedepur. Ghosh Chowdhury, S (1997) Failures due to improper hardening of steel components. In: UNSPECIFIED. Ghosh Chowdhury, S (1999) X-ray diffraction: principles and its application to structural analysis. In: UNSPECIFIED. Ghosh Chowdhury, S and Munda, Parikshit and Singh, S R (2010) Development of Advanced High Strength Steels (AHSS) for Automobiles: A Review on Design Criteria. In: International Conference : Automotive Materials & Manufacturing - 2010, Oct 2010, Pune. Gnanamoorthy, J B and Jayakumar, T and Raj, Baldev (1995) Failure Analysis of A 304 SS Girdling Loop of the Boiler in a 500 MW Thermal Power Plant. In: Proceedings of the National Workshop on Boiler Corrosion (NWBC-95), April 11-12, 1995, NML, Jamshedpur. Goel, D B and Saxena, M N (1969) Tempering characteristics of a Cu-AI-Ag Alloy. In: UNSPECIFIED. Goel, D B and Saxena, M N (1968) Tempering Characteristics of A Cu-Al-Ag Alloys. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Goel, Malti (1998) Reduction of Greenhouse Gas Pollution in Non-Ferrous Metal industry : Indian Perspective. In: UNSPECIFIED. Goel, R P (1994) Slag formation and control in electric furnace steel making. In: UNSPECIFIED. Goel, R P (1997) Smelting Technologies for Ferrochromium Production - Recent Trends. In: UNSPECIFIED. Goenka, Ashish and Bhunia, Kamalendu and Shukla, Satish Chandra and Kundu, Gautam (2010) Effect of particle shape on settling characteristics. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Gokarn, A N and Ravetkar, D D and Kulkarni, S S (1997) Waste Reduction at the Source and Waste Recycle through Briquetting of the Reduction Charge in the black- ash process. In: UNSPECIFIED. Goldsmith, F C (1957) Chemical Treatment of Molten Non-Ferrous Metals. In: UNSPECIFIED. Gopal, S R and Sharma, C M (1999) Use of fly ash as building materials. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Gopalkrishnan, N (1968) Aluminium in Engineering. In: UNSPECIFIED. Gopalkrishnan, N (1968) Aluminium in Engineering. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Gorai, Bipra and Jana, R K and Premchand, (2002) Reduction of Emission from Aluminium Industries and Cleaner Technology. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Goswami, Linee and Khare, Puja and Baruah, B P (2010) Emission of fine particulates and SO2 during coke making—a pilot plant study. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Goswami, N G (2003) Marketing : Business Promotion - Some Thoughts and a Few Case Studies. In: UNSPECIFIED. Gouri Charan, T and Haldar, D D and Nagnoor, P C (2010) Studies on the cleaning potentialties of IB valley coal by washability investigations. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Gourishanker, S (2001) Recent Techniques for Life Assessment of Boiler Components. In: UNSPECIFIED. Govil, P K (1994) X-Ray Fluoresence Spectrometry in Geological Samples. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA 1994), January 18-20,1994, National Metallurgical Laboratory, Jamshedpur. Goyal, Anshul and Roy, Papiya and Banerjee, P K (2010) Effect of air core on flow rate and split in a hydrocyclone. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Grange, G and Jourdan, C (1969) Growth Mechanism of Helicoidal Nickel Whiskers. In: UNSPECIFIED. Grange, G and Jourdan, C (1968) Growth Mechanism of Helicoidal Nickel Whiskers. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Grieve, A and Ely, F (1960) The Role of the Pilot Plant in Iron ore Sintering. In: Symposium on the Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Grover, H J and Hyler, W S (1953) Stress Concentrations: Their Effect on Design for Repeated Loading. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Guauvry, Robert (1968) Contribution of Aluminium to the development of large scale building construction in France. In: UNSPECIFIED. Gudipati, Sridhar (1995) Physical Metallurgy of Some Important Non-ferrous Metals and Alloys. In: Experimental Techniques in Industrial Metallography [ETIM - 95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR), Jamshedpur. Gupta, A K (1958) Oxygen in Foundry Steel-Making. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Gupta, K K (1994) Inductively Coupled Plasma Spectrometer : Applications in Environmental Analysis. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA - 1994), January 18-20,1994, National Metallurgical Laboratory, Jamshedpur. Gupta, K N (1960) L-D and Basic Lined Side Blown Converter. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Gupta, K N and Pande, A M and Vaish, A K (1994) Melting behaviour of sponge iron in induction furnace. In: UNSPECIFIED. Gupta, K N and Vaish, A K (1994) On the potentiality of production of low S&P hot metal by VRDR-SAF process. In: Workshop on Production of Liquid Iron Using Coal, Aug 24-25, 1994, RRL Bhubaneswar. Gupta, M N (2003) Impediments in Technology Transfer. In: UNSPECIFIED. Gupta, P C (1985) Processing of Indian Iron Ores. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of India Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Gupta, P K (1990) Finite Elements Modelling of Forming Processes a State of the Art Review. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedpur. Gupta, P K and Srivastava, K N (1961) Development of Light Metal Industry in India. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Gupta, R C (1994) Nitrogen as Substitute to Nickel While Preparing Stainless Steel in Mini Steel Plants Using Electric Arc/Induction Furnaces. In: UNSPECIFIED. Gupta, R D and Chakravarty, D P and Chakravarty, R and Gupte, P K (1969) Study of microstructure of chill cast aluminium bronzes (Cu-AI-Fe-Mn). In: UNSPECIFIED. Gupta, R D and Gupte, P K and Chakravarty, D P and Chakravarty, R (1968) Study of Microstructure of Chill Cast Aluminium Bronzes (Cu-Al-Fe-Mn). In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Gupta, R K (2003) Managing Intellectual Property. In: UNSPECIFIED. Gupta, Ramendra (2010) Challenges and opportunities in uranium processing industry in India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Gupta, S K and Tandon, J K and Ghorai, D N and Pal, P K and Sarkar, P K (2002) Transforming Steel Domain Green through Innovative Waste Management - A Jindal Approach. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Gupta, Santosh K and Bhat, Shrikant A (2004) Genetic Algorithm and Multi-objective Function Optimization with the Jumping Gene(Transposon) Adaptation-A Primer. In: The excerpts of the lecture clelivered by Prof, Santosli K. Gupta, 14/07/2003, Jamshedpur. Gupta, U and Tiwari, S N and Sharma, R N and Nath, R and Tewari, V K and Prakash, S (1995) Failure Investigation of a Boiler Pipe. In: Proceedings of the National Workshop on Boiler Corrosion(NWBC-95), April 11-12, 1995, NML, Jamshedpur. Gupte, P K and Nijhawan, B R (1958) An Investigation into the Development of Prospective Indian Austenitic Stainless Steels. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Guru Vittal, U K and Kumar, Sanjay (1999) Use of fly ash admixed concrete for pavement construction*. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Guru Vittal, U K and Murty, A V R S and Kumar, Sanjay (1999) Use of fly ash admixed concrete for pavement construction. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Gurulaxmi, S N and Ghosh, T K and Mukherjee, A K (2010) State of art characterization study of banded hematite jasper for the purpose of beneficiation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. HHadjiev, A and Hadjiev, P and Georgiev, R (2000) Flotation of Barite From Complex Iron Ore. In: UNSPECIFIED. Hait, Jhumki and Jana, R K and Kumar, Vinay and Dasgupta, P and Bandyopadhyay, M and Sanyal, S K (1998) Hydrometallurgical processing of anode slime for recovery of valuable metals. In: UNSPECIFIED. Haldar, D D (2010) Beneficiation of non-coking coals: basic concepts and technology routes. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Halliday, Iain M D (1960) Continuous Casting Development for Steel. In: Symposium on Pilot Plant in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Hangovan, S and Rajanna, M and Nath, K P and Goud, S L Mahesh (1985) Crushing and Grinding Practice at Ingaldhal Copper mines. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Hao, X J and Yin, W and Strangwood, M and Peyton, A and Dickinson, S J and Morris, P F and Davis, C L (2011) Monitoring of Steel Microstructures using Electromagnetic Sensors. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Harman, C N (1997) Status of Ferro Alloy Industry in the Liberalised Economy. In: UNSPECIFIED. Haugen, B E and De Silva, S R and Datta, B K (2000) A de-dusting device for removing fines from pellets, granules and coarser powders. In: UNSPECIFIED. Havelia, Sarthak and Malathi, M and Deo, Brahma (2004) Heat Transfer Analysis of Lance Skulling in Top Blown Oxygen Steelmaking converters. In: International Symposium of Research Students on Material Science and Engineering, December 20-22, 2004, Chennai, India. Havemann, H A (1959) Direct Iron Ore Reduction for Asia. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Hegde, L and Prasad, S N (1998) Formability of Metal-Matrix Composite based on Aluminium Alloy 6061 - Reinforced with Silicon Carbide Particulars. In: UNSPECIFIED. Hempel, Max and Houdremont, Eduard and Duesseldorf, (1953) Contribution to the Knowledge of Procedures going on during Cyclic Stressing of Materials. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Hinde, J (1958) The Welding of Special and Alloy Steels. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Hoar, T P and Hines, J G (1958) The Stress-Corrosion Cracking of Austentic Stainless Steels in Aqueous Chloride Solution. In: Symposium on Production, Properties and Appications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Holmes, Ralph J (2010) CSIRO carbon steel raw materials research. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Hore, S and Das, Suchandan K and Bhattacharyya, K K and Singh, Ratnakar (2011) Data-Based Performance Modelling of Hydrocyclone for Processing Iron Ore Fines. In: International Seminar on Mineral Processing Technology (MPT-2011), Oct 20, 2011, Udaipur, India. Hore, S and Das, Suchandan K and Godiwalla, K M and Bhattacharyya, K K and Singh, Ratnakar (2007) Modelling performance of water-only cyclone as a gravity separator for fine coal cleaning. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur. Hori, Kazuo (1961) On the Movements of Absorbed Gases in Aluminium. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. IImai, Y and Ishizaki, Tetsuro (1958) Influence of Nitrogen on the Low Temperature Brittleness of steel. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1958, NML, Jamshedpur. Ineson, E and Hoyle, G (1958) The Cast Structure of High-Speed Steel. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Ishihara, Yoshio (1958) Progress of Special Steel-Making Process in Japan. In: Symposium on Production, Properties, and Applications, of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Ismail, A K (2010) Energy saving during alum production from kaolin with coproduction of alumina-silica composites from process silica wastes. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Iverson, H G (1960) Role of Metallurgical Pilot Plants in the United States. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. JJacob, K (1969) Air-borne survey for locating mineral resources: A new venture of high promise for speedy mineral exploration in India. In: UNSPECIFIED. Jacob, K T (2004) Fuel Cell : Efficient Power Sources of 21st Century. In: The excerpt of the lecture delivered by Prof. K. T Jacob, 28/05/2003, Jamshedpur. Jacomet, P (1966) The recent developments of aluminium conductors in France in public distribution and industrial plants. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Jain, P and Sinha , A K and Bhakta, U C (1995) Stress Corrosion Cracking of Stainless Steel Super Heater Tubes in 200 MW Boiler. In: Proceedings of the National Workshop on Boiler Corrosion (NWBC-95), April 11-12, 1995, NML, Jamshedpur. Jain, P C (1985) Welcome address. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of the Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR), Jamshedpur. Jain, Pankaj K and Sahu, M N and Raju, C B (1999) Coating of alumina on ceno-spheres of fly-ash. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Jakhu, M R (1998) Process Control in Flotation Plants. In: Workshop on Froth Flotation:Recent Trends, September 22-24,1998, RRL Bhubaneswar. Jaleel, V A and Panda, P K and Kannan, T S (1998) Evaluation of Mechanical Properties of SiC Whisker Reinforced In-Situ Composites Prepared by Carbothermal Reduction of Silicate Minerals. In: UNSPECIFIED. Jana, R K and Gorai, Bipra and Premchand, (1998) Processing of dust materials from Indian copper plants. In: UNSPECIFIED. Jana, R K and Kumar, Vinay and Saha, A K and Rao, K V and Pandey, B D and Premchand, (1996) Processing of Tungsten Alloy Scrap for the Recovery of Tungsten Metal. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries, Feb, 1996, NML, Jamshedpur. Jana, R K and Pandey, B D and Kumar, Vinay and Bodas, M G and Akerkar, D D (1986) Seperation & Recovery of Cu and Zn by Solvent Extraction - Electrowinning from the Sulphate Leach Liquor of Complex Sulphide Ore. In: Proceedings of The National Symposium on Separation Techniques, Jan 1986, . Jana, R K and Randhawa, N S and Pal, J and Minj, R K and Godiwalla, K M (2005) Recovery of manganese as ferro-silico-manganese alloy from leached sea nodule residue. In: National Seminar on Polymetallic Nodule, 29-30th September 2005, Bhubaneswar. Jangbahadur, S S and Garg, Rajneesh and Agarwal, Chirag (1998) Role of Phosphating systems in Electrodeposition priming & Latest Trends in Surface Coating in Automobile Industry. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur. Jay Myers, O and Ovestrud, R M (1968) Modern Core Processes for the Non-ferrous Foundry. In: Symposium on Non-ferrous Metals Technology : Paper for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory(CSIR) Jamshedpur. Jayakumar, T and Kumar, Anish (2011) Nondestructive Evaluation of Microstructure and Stresses in Steels. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Jena, P K and Gupta, C K and Bose, D K and Taneja, A K (1969) The Present status and the projected programme on niobium-tantalum metallurgy in India. In: UNSPECIFIED. Jennings, R F and Frankau, A M (1959) Blast Furnace Burden Preparation with Reference to High Ash Coke. In: Symposium on Iron & Steel Industry in India organised by the NML, August, 1959, NML, Jamshedpur. Jha, B B and Ojha, S N and Misra, B K (2008) Residual life estimation of high temperature tubings based on oxide scale thickness measurement. In: UNSPECIFIED. Jha, G S and Chattopadhyay, P C and Prasad, P S and Mitra, A N and Maji, S C and Gouri Charan, T and Haldar, D D (2010) Washability studies and characterization of cleans of coking coal sample from BCCL, CIL, India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Jha, Manis K and Choubey, Pankaj K and Kumari, Archana and Kumar, Rakesh and Kumar, Vinay and Lee, Jae-chun (2011) Leaching of lead from solder material used in electrical and electronic equipment. In: Proceedings of second symposium on Recycling of waste II, 2011, Recycling of waste II. Jha, Manis K and Kumar, Abhishek and Kumar, Vinay and Lee, Jae-chun (2011) Prospective scenario of e-waste recycling in India. In: Proceeding of Second Symposium On Recycling of Electronic Waste II, 2011, Recycling of waste II. Jha, Manis K and Kumar, Vinay and Bagchi, D and Singh, R J and Lee, Jae-chun (2006) Recycling of rayon industry effluent for the recovery and separation of Zn/Ca using Thiophosphinic extractant. In: Proceeding of spring meeting and 27th conference, May, 2006, KIGAM. Jha, Manis K and Kumar, Vinay and Lee, Jae-chun (2007) Processing of electroplating effluent for the recovery of zinc and chromium using ion exchange technique. In: Proceedings of International Symposium of resource recycling, 2007, resource recycling. Jha, Manis K and Shivendra, and Kumar, Vinay and Pandey, B D and Kumar, Rakesh and Lee, Jae-chun (2010) Leaching studies for the recovery of metals from the waste printed circuit boards (PCBs). In: Proceedings of TMS-2010, Feb 2010. Jha, R (1997) Recovery of Zinc from Zinc Ash. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur. Jiles, D C and Lee, S J and Lo, C C H (2002) The Effects of Stress on Magnetic Properties and the use of Magnetic Measurements for Evaluation of Materials. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Joarder, A (1995) Physical Metallurgy of Sheets. In: Experimental Techniques in Industrial Metallography [ETIM - 95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR, Jamshedpur. Joglekar, G D and Sen, Daneswar (1957) Characteristics of Metal-Graphite Brushes Made by the Powder Metallurgy Technique. In: UNSPECIFIED. Joseph, P F and Prasad, V G K and Janarthanan, A J and Bhaktadarsan, K S (2010) Enhanced zircon recovery through centrifugal jigging. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Joseph, P F and Prasad, V G K and Janarthanan, A J and Chandrasekar, V (2010) Environmental management in beach sand mining and processing—a role model. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Joseph, P F and Prasad, V G K and Janarthanan, A J and Viswanath, R V (2010) Wet high intensity magnetic separation: efforts taken to adapt the machine to the mineral separation plant of IREL, chavara. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Joshi, I K and Menaria, K L and Mathur, N K (1985) Cationic Guar Gum as a depressor for a Gangue in froth flotation of Pyritic-zinc ore from Rajpura Dariba Mines, Udaipur, India. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR), Jamshedpur. Joshi, R M and Thimmaiah, K S and Deshpande, R V and Maheshwari, M D (2011) Nondestructive Evaluation of Weld seam Failures in Tubes and Other Structures for Thermal, Wind and Nuclear Power Applications. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Jyoti, Divya and Rath, R K and Mohanty, Sunati and Singh, Ratnakar and Bhattacharyya, K K (2010) Beneficiation of a finely disseminated low-grade iron ore by froth flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. KKale, B B and Kulkarni, S S and Gokarn, A N (1998) Conversion of Natural Resources through Waste reduction at the Processing Step by Briquetting Technique. In: UNSPECIFIED. Kamiya, Kohji and Ohba, Akira and Gunji, Koki (1973) Desulphurization of Coke-Mixed Iron Ore Pellets. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Kanari, N and Mishra, D and Gaballah, I and Dupre, B (2002) Kinetics aspects of zinc basic carbonate decomposition. In: EPD Congress -2002 (Annual Meeting of the Minerals-Metals-and-Materials-Society ), Feb. 17-21, 2002, Seatle. Kante, Murali and Reddy, Rama Koti and Ghali, Venkata Subbarao and Mulaveesala, Ravibabu (2011) Frequency Modulated Infrared Imaging for Non-Destructive Testing of Steel Materials. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Kapoor, A N and Chatterjea, A B and Nijhawan, B R (1957) A Comparative Study of Non-Ferrous Coatings on Steel. In: UNSPECIFIED. Kapoor, A N and Gupte, P K and Nijhawan, B R (1960) Hot Dip Aluminising of Steel Wire- Laboratory Scale Investigations and Pilot Plant Studies. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Kar, A K and Rath, R K and Mohanta, M K and Singh, Ratnakar and Kumar, Anil (2010) Characterisation and surface chemical studies on ultrafine iron ore. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Kar, B C (1957) High Purity Electrolytic Manganese From Low-Grade Ore as a Substitute for Various Forms of Manganese Now being used in Metallurgical Industries. In: UNSPECIFIED. Kar, B C and Banerjee, T (1966) The application of electrolytic manganese as a substitute ferro alloy. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Karandikar, M V and Lele, P G and Khadilkar, S A (1999) Enhancement of reactivity and increased usage of low lime class -F-fly ash-possible avenues. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Katti, A and Mishra, B K and Mehrotra, S P (1997) Simulation of industrial gravity separation processes using a general purpose simulator. In: UNSPECIFIED. Kenzhaliev, B K and Abdykirova, G Zh. and Zhapbasbaev, U K and Beisembaeva, G Zh. and Suleimenov, E N (2010) Development of new modifying reagent- assisted technology for rebellious gold-bearing ores processing. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Kenzhaliev, B K and Berkinbaeva, A N and Beisembaeva, G Zh. and Asilbekov, B and Suleimenov, E N (2010) Development of resource saving technology for gold recovery with intensifying additives. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Kenzhaliev, B K and Berkinbayeva, A N and Khodaryova, T A (2010) Effects of microorganisms and their metabolites on nonferrous and precious metal ores leaching. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Kenzhaliev, B K and Lozhnikov, S S and Chanturiya, V A and Zhapbasbaev, U K and Suleimenov, E N (2010) Development of combined technology for rebellious metamorphized polymetallic ores. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Kenzhaliev, B K and Yarmukhamedov, E K and Akhmetova, K. Sh. and Ponomaryova, E I and Atanova, K. Sh. (2010) Extraction of gold from heap cyanic solutions of polymetallic ores by polycondensational anionites. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Khairy, E M and Hussein, M K and EL - Barawy, K A (1969) Sulphatisation and Sulphidisation for hydro-metallurgical extraction of main constituents of a local ilmenite Ore. In: UNSPECIFIED. Khalid, M and Mehrotra, S P and Verma, C L (1999) Performance of fly ash based multicomponent blended cements. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Khanna, A S (1995) Fireside Corrosion and Erosion Problems in Coal Based Power Plant. In: Proceedings of the National Workshop on Boiler Corrosion(NWBC-95), April 11-12, 1995, NML, Jamshedpur. Khanna, A S (1998) New Generation Coatings - A Combination of Thermal Spray and Organic Paint Coatings to give Enhanced Corrosion Protection in Aggressive Environments. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur. Khanna, S S and Swarup, D (1961) The Role of Wet-Tensile Strength of Foundry Sands in the Surface Finish of Aluminium Sand Casting. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Khare, Puja and Sahu, O P and Baruah, B P (2010) Chemometric analysis: a tool to predict the release behaviour of hazardous trace elements (HTEs) during coal mining and utilization. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Khare, R N (1957) The Copper Smelter at Ghatsila. In: UNSPECIFIED. Kheiry, E M and Hussein, M K and Barawy, K A (1968) Sulphatisation and Sulphidisation for Hydrometallurgical Extraction of Main Constituents of a Local Ilmenate ore. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Kieffer, Richard and Benesovsky, Friedrich (1958) Sintered Materials on the base of Iron with Special Regard to Alloyed Sintered Steels. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Kjellgren, Bengt R F (1961) Status of the Beryllium Industry in the United States of America. In: Symposium on Light Metal Industry in India, Feb. 14-17, NML, Jamshedpur. Klimenov, Vasiliy A and Kroning, Michael and Kroning, Paul and Mohr, Friedrich and Reddy, K M and Wolf, Helmut (2011) NDT Controlled Production in Steel Industry. In: Proceedings of International Conference on Nondestructive Evaluation for Steel and Allied Industries - NDESAI, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Kohad , V P (1998) Flotation of Sulphide Ores - HZL Experience. In: Workshop on Froth Flotation: Recent Trends, September 22-24,1998, RRL Bhubaneswar. Konig, Horst (1973) Reduction of Iron Ores using Non-Coking Coal as the Reduction Agent. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Kopparthi, Prasad and Gupta, Ashiwanit Kumar and Banerjee, P K (2010) The effect of softening recycled water on coal flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Koshiba, Eng. Sadao (1958) The Properties of High-speed Steel Derived from Magneic Iron Sand. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Koshta, R N and Agarwala, K C and Subrahmanyam, N and Rao, J J (1985) Studies on the Geology and Beneficiation of Chandak Magne-site Deposit from Pithoragarh District, Uttar Pradesh. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Krainer, H (1960) Pilot Plants for Metallurgical Research at Fried. Krupp, Essen. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Krishnan, A A (1953) A Fundamental approach to the Study & Control of Failures due to Liquid or a Brittle Phase Enveloping Grains. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Krishnan, A A and Prakash, Ved (1957) Creep Resistance Non-Ferrous Alloys. In: UNSPECIFIED. Krishnan, R M and Khanna, M N and Chatterjea, A B and Nijhawan, B R (1957) Preparation of Aluminium-Silicon Alloys by Aluminothermic Reduction. In: UNSPECIFIED. Krishnan, R M and Nijhawan, B R (1953) Failures of Metals in Sulphur & Sulphur Bearing Media. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Krishnan, R M and Srivastava, K N and Banerjee, T (1959) The Development of Iron and Steel Industry in India's Five Year Plans. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Krishnan, T S (1969) Analytical quality Control in the Production of Nuclear grade Zirconium and its Alloys. In: UNSPECIFIED. Krishnan, T S (1968) Analytical Quality Control in the Production of Nuclear Grade Zirconium and its Alloys. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Krishnan, T S (1968) Analytical Quality Control in the Production of Nuclear Grade Zirconium and its Alloys. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Krishnaswamy, N and Bhattacharya, P S (1995) Water side Corrosion in Boilers - Tata Steel's Experiences. In: Proceedings of the National workshop on Boiler Corrosion(NWBC-95), April 11-12, 1995, NML, Jamshedpur. Kumar, A and Sen, K (2000) Design and Construction Aspects of Mini Coal Flotation Plant. In: UNSPECIFIED. Kumar, Abhishek and Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2010) Solvent extraction: a potential tool for the separation of metals from leach liquor of electronic scraps. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Kumar, Aman (2010) Increasing crushing circuit efficiency. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Kumar, Dharmendra and Surana, V S (1966) Some aspects of redesigning in aluminium. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Kumar, G (2000) Geochemical Behaviour of Ferromanganese Nodules from the Central Indian Ocean Basin. In: UNSPECIFIED. Kumar, G and Singh, S K and Sinha, B K and Prasad, Bikas (2010) Ground water recharge potential of the tasra block of chasnala—a case study. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Kumar, P and Prakash, R (1996) Quality assessment of class fibre composites by acousto ultrasonic technique. In: Trends in NDE science and technology - Proceedings of the 14th world conference on NDT, 1996, 14th WCNDT. Kumar, Pawan and Sah, Rakesh and Vidyadhar, A and Das, Avimanyu (2010) Dry beneficiation of coal fines using air table. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Kumar, R Sandeep and Joshi, Deepa and Kumar, Yudhisther and Gupta, Reeta and Kumar, Ashok (2011) EMAT Based Ultrasonic System for Determination of Thickness Variation in Metallic Samples. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Kumar, Rajendra (1995) Contemporary views of Corrosion and Performance Related Issues in Modern Coal Fired Boiler. In: Proceedings of the National Workshop on Boiler Corrosion (NWBC-95), April 11-12, 1995, NML, Jamshedpur. Kumar, Rajendra (1985) Vote of Thanks. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of the Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Kumar, Rajendra and Prakash, Ved (1966) Physical Metallurgy of Substitution. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Kumar, Rajendra and Singh, Manjit (1966) Electrical conductivity of some aluminium alloys. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Kumar, Rajendra and Singh, Manjit (1968) An Improved Aluminium Conductor. In: UNSPECIFIED. Kumar, Rajendra and Singh, Manjit (1968) An Improved Aluminium Conductor. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Kumar, Rajendra and Singh, Manjit (1961) Structure of Liquid Aluminium-Copper Alloys. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Kumar, Rakesh and Alex, T C and Jha, Manis K and Khan, Z H and Mahapatra, S P and Mishra, C R (2004) Mechanochemistry and the bayer process of alumina production. In: Light Metals Symposium held at the 133rd TMS Annual Meeting, March, 2004, TMS Annual Meeting. Kumar, Rakesh and Alex, T C and Khan, Z H and Mahapatra, S P and Mehrotra, S P (2005) Mechanical activation of bauxite: potential and prospects in the bayer process. In: UNSPECIFIED. Kumar, Rakesh and Kumar, Sanjay and Alex, T C and Srikanth, S and Mehrotra, S P (2010) Process innovations using mechanical activation of minerals and wastes. In: UNSPECIFIED. Kumar, Rakesh and Srivastava, J P and Premchand, (1998) Utilization of iron values of red mud for metallurgical applications. In: UNSPECIFIED. Kumar, S and Jain, A K (1999) Environmental evaluation of coal ash on soil behaviour - A case study of Chandrapura thermal power station. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Kumar, S G and Bhattacharya, K K and Reddy , PS R and Sastri, S R S (1985) Beneficiation of Thermal coal. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Kumar, Sanjay and Agadi, W and Das, V K and Desai, B N (1994) Ultrasonic acoustic transducers for underwater acoustic measurements. In: Symposium on Ocean Technology, on the Occasion of the Golden Jubilee of the Council-of-Scientific-and-Industrial-Research (CSIR), Aug 27-29, 1992, Goa. Kumar, Sanjay and Das, U S and Singh, K K (1999) Sintering studies on fly ash and clay mixes. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Kumar, Sanjay and Das, U S and Singh, K K and Ramachandrarao, P (1998) Development of ceramic floor and wall tiles from fly ash. In: UNSPECIFIED. Kumar, Sanjay and Kumar, Rakesh (2010) Tailoring geopolymer properties through mechanical activation of fly ash. In: 2nd International conference on sustainable construction materials and technologies, 28-30 June, 2010, Ancona, Italy. Kumar, Sanjay and Kumar, Rakesh and Bandopadhyay, A and Mehrotra, S P (2007) Novel geopolymeric building materials through synergistic utilisation of industrial waste. In: International conference alkali activated materials: research, production and utilization, 2007, Prague. Kumar, Sanjay and Kumar, Virendra and Prasad, M M (2001) Corrosion of Reinforced Concrete and Its Protection. In: National Seminar on Corrosion and Its Prevention (NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Kumar, Sanjay and Singh, K K (1998) Development of Corundum/Mullite Composites from fly Ash & Alumina Mix by Reaction Sintering. In: UNSPECIFIED. Kumar, Sanjay and Singh, K K and Das, S K and Ramachandrarao, P (2002) Waste Utilisation : Towards Cleaner Environment. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Kumar, Shivesh and Rath, R K and Singh, Ratnakar and Kumar, Anil (2010) Separation of iron bearing minerals from slime by flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Kumar, Surendra and Pradhan, B (1998) Three-Dimensional Finite Element Analysis of Composite Laminates Subjected to Transverse Impact. In: UNSPECIFIED. Kumar, Vinay and Agrawal, A and Pandey, B D and Premchand, (1998) Processing of spent tanning and chrome plating solutions for chromium recovery. In: Seminar on Environmental & waste management: in non-ferrous metallurgical industries, 1998, NML Jamshedpur, India. Kumar, Vinay and Jha, C N (1999) Fly ash for high value added applications. In: Proceedings of the National Seminar on Fly Ash Utilisations, February 26-27, 1999, NML Jamshedpur, India. Kumar, Vinay and Pandey, B D and Agrawal, A and Bagchi, D and Kumari, S and Sahu, S K (2005) Value addition in the processing of copper bleed solution by solvent extraction process. In: Proceedings of the International solvent extraction conference, 2005. Kumar, Vinod and Jadhav, G N and Khosla, N K and Chattoraj, U S and Singh, Ratnakar and Bhagat, R P and Nayak, B and Mohanta, M K and Bhattacharyya, K K and Mehrotra, S P (2007) Characterization and its implication on beneficiation of low grade iron ore by gravity separation. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur. Kumar , Rakesh and Bandopadhyay, Amitava (2002) Clean Technologies in Nonferrous Metals Recycling. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Kumari, Archana and Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2010) Recovery of lead from the solder of waste printed circuit boards. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Kumari, Neha and Vidyadhar, A and Konar, J and Bhagat, R P (2010) Beneficiation of iron ore slimes from Karnataka through dispersion and selective flocculation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Kumari, Sarita and Sahu, S K and Sharma, Vikram and Agrawal, A and Bagchi, D and Pandey, B D and Kumar, Vinay (2004) Synthesis of electrolytic copper and nickel powders from the copper bleed electrolyte of a copper smelter. In: Non Ferrous Meet - 2004, 2004. Kundu, D K and Barman, R K (2002) Coke Oven Emission Standards - A Comparative Assessment. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Kunwar, R K and Maulik, S C and Chakravorty, N (1997) Beneficiation of Low Grade Kyanite from Sirboi Mines of Singhbhum District. In: UNSPECIFIED. Kunwar, R K and Maulik, S C and Chakravorty, N (1997) Beneficiation of low grade kyanite from Sirboi Mines of Singhbhum District. In: UNSPECIFIED. Kushwaha, H S and Vaze, K K and Bhasin, V (2001) Design Criteria for Fracture Assessment of Pressurized Nuclear Components. In: UNSPECIFIED. Kushwaha, Jyoti and Agrawal, A and Upadhyay, A K and Mankhand, T R and Sahu, K K (2011) Recovery of Molybdenum from Spent HDs Catalyst Leach Liquor by Solvent Extraction using Aliquat 336. In: 15th International Conference on Non-ferrous Metals 2011, 8-9 July 2011, Kolkata, India. Kuzev, L and Hristov, N (2000) Vibration grinding - An approach for secondary use of refuse metallic aluminium. In: UNSPECIFIED. LLahiri, A and Das Gupta, N N and Basu, T N (1959) Some aspects of preparation of Coal for Coking (11). In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Lahiri, A K (1973) On the Direct Reduction of Iron Ore in Rotary Kiln. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Lahiri, A K (1994) Thermodynamics of Refining in Electric Furnace Steelmaking. In: UNSPECIFIED. Lahiri, A K and Aggarwal, Kajal (2002) Clean Technology : Limit and Limitation. In: Clean Technologies for Metallurgical Industries (EWM - 2002), 24-25 January, 2002, CSIR - National Metallurgical Laboratory, Jamshedpur. Lahiri, A K and Mukherjee, K P and Banerjee, T (1966) Studies on the properties of some copper-manganese alloys. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Lahiri, B B and Bagavathiappan, S and Saravanan, T and Rajkumar, K V and Kumar, Anish and Philip, John and Jayakumar, T (2011) Defect Detection in Weld Joints by Infrared Thermography. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Lal, S M and Ram, Mohan and Gundewar, C S (2010) Beneficiation of a low grade magnetite ore from Jharkhand area. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Latiere, H J and Michaud, R (1961) On Slip Bands Obtained by Tension on Aluminium Specimens. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Lee, Taejong and Lee, Soowhan and Kim, Nohyu and Lim, Jongsoo (2011) Thermo-graphic Detection of Surface Cracks. In: Proceedings of the International Conference on Nondestructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Lenka, Suvendu (2011) Basic Technique, Limitation and Application of Guided Waves, Phased Array and Electro-Magnetic Acoustic Transducer(EMAT). In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Liddiard, E A G and Sully, A H (1957) The Present Position & Future of the Manganese Industry with Special Reference to Indian Resources. In: UNSPECIFIED. Liu, J and Zhou, L and Hao, X J and Strangwood, M and Peyton, A and Morris, P F and Davis, C L (2011) Non-destuctive Evaluation of Power-Generation Steel Microstructure Changes Using Electromagnetic Sensors. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries NDESAI - 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Liu, Peikun and Cui, Xueqi and Wang, Xiaopeng (2010) Application of new type pre-classification hydrocyclone with centrifugal volute in grinding process. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Lloyd, H K and Oxlee, C H (1966) The influence of Aluminium and Iron additions on Copper-Manganese-Zinc Alloys. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. MMacgregor, R A (1953) Failures of Steel Parts in Service. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Madhukar, A (2003) Technology Forecasting - An Important Tool for Marketing in R&D. In: UNSPECIFIED. Maekawa, Shizuya and Nakagawa, Yoshitaka (1959) Study on the Method of Taking a Sample for Determination of Oxygen in Molten Steel. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Mahajan, R C (1997) Spelter Pan - Design, Heating Systems and Operations. In: Workshop on Hot Dip Galvanizing, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur. Mahanty, M S and Bhoray, S S and Sankaran, C and Srinivasan, S R and Bhatnagar, P P (1968) Extraction Characteristics of Alumina from Gujarat Bauxites. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Mahanty, M S and Bhoray, S S and Sankaran, C and Srinivasan, S R and Bhatnagar, P P (1968) Extraction Characteristics of Alumina from Gujrat Bauxites. In: UNSPECIFIED. Mahato, M M and Agrawal, M K and Sinha, S N (2010) Production of sg grade pig iron by optimising slag chemistry in mini blast furnace. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Mahato, M M and Sinha, S N (2002) Studies on the Influence of Different Grades Rolls on Microstructure Properties Correlation and Process Economics in Hot Rolling. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Maitra, Saikat (1999) Ceramic products from fly ash Global perspectives. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Maity, P C and Panigrahi, S C (1998) Production of Aluminium Matrix In - Situ Particulate Copmosites. In: UNSPECIFIED. Maity, S and Chandrasekhar, M and Godiwalla, K M and Bhattacharyya, P and Nayak, B and Minj, R K and Mehrotra, S P (2010) A study of separation of iron powder and preparation of Ti-Al alloy by selective electrolysis of ilmenite. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Majumdar, J Dutta and Manna, I (2002) Laser Surface Engineering of Metallic Components. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Majumdar, S K and Lahiri, A K (1959) Mass Handling of Materials. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Majumdar, S K and Sarkar, G G and Chakravarti, A K and Lahiri, A (1960) Coal Washing Pilot Plants at Central Fuel Research Institute, Jealgora, India. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Majumdar, S K and Sarkar , G G and Chakravarti, A K and Lahiri, A (1960) Coal Washing Pilot Plants at Central Fuel Research Institute, Jealgora, India. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Majumder, B L (1953) New Materials of Construction for Heat Engines in High Temperature Service. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Malaviya, S K and Chatterjee, B and Singh, K K (1999) Fly ash - An emerging alternative building material. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Malcor, H (1959) Experience with Low Shaft Furnace at Ougree. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Malcor, H (1960) Usefulness of Pilot Stations and Plants. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Malleswara Rao, V (1985) Factorial Design and Statistical Analysis of Flotation Experiments. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Mallick, B and Maity, P C and Sinha, V K (1998) Production of Aluminium-Silicon Carbide Cast Particle Composites Without Magnesium. In: UNSPECIFIED. Mallik, A K and Paul, K K and Kumar, A Seshu (2003) Engineering Associated with Research and Development. In: UNSPECIFIED. Malode, Parag and Chhangani, Ravindra and Datta, Amlan and Basu, Biswajit (2010) DEM analysis of the role of lifter design on performance of rotary cooler. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Mandal, C and Mishra, A K and Prasad, R R and Avtar, Ram and Mukerjee, D (2011) A non destructive method to detect the incipient fault in rolling element bearing. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Mandal, S K (2010) Study of particle dynamics in Floatex Density Separator through image processing and analysis technique. In: Proceedings of First International Joint Conference on Information & Communication Technology 09-10 January 2010, January 09-10, 2010, Interscience Institute of Management & Technology, Bhubaneswar. Mandhyan, A K (2007) Corrosion of metals and its prevention. In: UNSPECIFIED. Manju, M S and Savithri, S (2010) Three dimensional cfd simulation of pneumatic coal injection in a direct reduction rotary kiln. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Mannaswamy, T V and Paranjpe, V G and Visvanathan, S (1959) Dolomite as a flux for High-Alumina Blast Furnace Slags. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Manthapurwar, N S and Tamhane, S M and Hasan, M Z and Aggarwal, A L (1996) Air Pollution Problems from Cupola Furnaces in Iron Foundries. In: UNSPECIFIED. Mantsevich, M I and Khersonskaya, I I (2000) Use of Organic Depressors for Selective Flotation of Copper -nickel and polymetallic ores. In: UNSPECIFIED. Maschlanka, W and Kehl, P and Knapp, H and Uhe, H (1973) The Production of Sponge Iron Utilizing the Midland-Ross Process at Hamburger Stahlwerke GMBH. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Maschlanka, W and Kehl, P and Knapp, H and Voss, H (1973) The Use of Sponge Iron in Electric Furnaces. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Mathad, G G and Altekar, V A (1961) Studies in the Amenability of Kolhapur Bauxite to Bayer's Process-Parts I and 11. In: Symposium on Light Metal Industry in India, Feb. 14-17, NML, Jamshedpur. Mathews, C K (1994) Advanced Techiques for Trace Elements Characterisation of Materials. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA 1994), January 18-20, 1994, National Metallurgical Laboratory, Jamshedpur. Mathur, A K (1999) Ash utilization in National Thermal Power Corporation. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Mathur, G P and Narayanan, P I A (1959) Beneficiation and Processing of some Important Raw Materials, for Iron and Steel Production. In: Symposium on Iron & Steel Industry in India organised by the NML, Aug.'1959, NML, Jamshedpur. Mathur, N N and Sen, P C and Rao, M R K (1985) Beneficiation and Utilisation of Low Grade Refractory Materials. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Maulik, S C and Chakravorty, N (1985) A Computer Oriented Algorithm to Determine the Raw-Mixture Composition for Sintering. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of the Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR), Jamshedpur. Maulik, S C and Sil, S K and Patnaik, H and Chakravorty, N (1989) Optimisation of Process Variables in Sintering through Statistical design of Experiments. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri. Mayer, G (1958) Some Recent Advances in the Study of Transformations in Alloy Steels. In: Symposium on Production, Properties and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Mcdonald, G G (1953) Some Interesting Engineering Failures Encountered in Australia. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. McFarlane, J (1958) Silicon Steel Sheets - An outline of Properties Applications and Recent Developments. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. McMurrich, R P (1953) The use of Shot-Peening as a means of Reducing Fatigue Failures in Metal Components. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Mediratta, S R and Saha, J K (2001) Recent Developments in Corrosion Protection of Steel Structures. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Mehrotra, S P (1998) Computer Aided Design and Synthesis of Flotation Circuits. In: Workshop on Froth Flotation : Recent Trends, September 22-24,1998, RRL Bhubaneswar. Mehrotra, S P (1990) Mathematical Modelling of Contrinuous Casting of Steel Strips by Single Roll Process. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedpur. Mehrotra, S P (2004) Mathematical modelling: A wonderful tool if Judiciously used. In: UNSPECIFIED. Mehrotra, S P and Kumar, Rakesh and Kumar, Sanjay (2006) Mechanical activation of solids in processing of minerals and wastes. In: Proceedings of the XXIII International Mineral Processing Congress, 3-8 Sept. 2006, Istanbul, Turkey. Mehrotra, S P and Mishra, B K (1997) Mathematical Modeling of Particle Stratification in Jigs. In: UNSPECIFIED. Mehrotra, S P and Shekhar, R (2000) Studies on Particle Suspension in Air-agitated Pachuca tanks. In: UNSPECIFIED. Mehta, K D and Anand Ram, S and Pal, S C and Abhilash, and Pandey, B D and Mankhand, T R (2009) Bacterial solubilisation of copper from a low grade sulphide mineral. In: Proc.BIOHYDROMET 2009, April 6, 2009. Mehta, K D and Das, Chitrangada and Pandey, B D (2010) Reductive leaching of valuable metals from indian ocean nodules by bacillus circulans. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Mehta, K D and Pandey, B D and Premchand, and Mankhand, T R (2000) Recovery of Valuable Metals from Sea Nodules in Presence of Pyrite and Sulphur. In: International Symposium on Processing of fines - Vol.2, 2000, NML Jamshedpur, Jamshedpur. Mellere, C (1959) Pelletising of Hematite Ores. In: Symposium on Iron & Steel Industry in India organised by the NML, Aug.'1959, NML, Jamshedpur. Meshram, Pratima and Sahu, S K and Sinha, Manish K and Khan, Pritam and Pandey, B D and Mankhand, T R (2010) Solvothermal synthesis of high value copper powder from Copper bleed solution. In: NMD - ATM 2010, 14-16th November 2010, National Science Seminar Complex, Indian Institute of Science, Bangalore. Meyer, Dr. Ing. Gunther and Bongers, Dr. Ing. Uwe (1973) The Krupp Sponge Iron Process Production and Utilisation of Metallized Materials. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, 19-21, Feb. 1973, National Metallurgical Laboratory (CSIR), Jamshedpur. Meyer, Kurt (1973) Present State of the Sl/Rn Process and Its Application to Indian Raw Materials. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Midha, P P and Gururajachar, A (1985) Effect of Low Grade Copper ore on Process Control and Costing at Mosaboni Concentrator. In: Proceedings of National Semiar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Miller, J R (1958) The Mysore Iron and Steel Works as a Major Producer of Stainless Steel in India. In: Symposium on Production, Properties, and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Minister, Chief (1973) Inaugural Address. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, 19-21, Feb. 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Mishra, D and Kanari, N and Gaballah, I and Dupre, B (2002) Zinc recovery from EAF dust through thermal reduction. In: EPD Congress -2002 (Annual Meeting of the Minerals-Metals-and-Materials-Society), Feb. 17-21, 2002, Seattle, USA. Mishra, K K (1994) Alternate charge materials: problems and prospects of utilizing in electric arc and induction furnaces. In: UNSPECIFIED. Mishra, K K (1994) Alternative charge materials: prospects & availability. In: UNSPECIFIED. Mishra, K K (1997) Ferro Alloys in Industrial Perspective. In: UNSPECIFIED. Mishra, K K (1994) Kinetic aspects of melting in electric arc furnace. In: UNSPECIFIED. Mishra, K K (2003) Synergy of Technology Transfer. In: UNSPECIFIED. Mishra, P K and Asadullah, I M and Lal, H S (2011) Environmental impact of coal-carbonization and its bioremediation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Mishra, P N and Goswami, N G and Mishra, S N (2003) Marketing in Libraries and Information Centres : A study on promotional efforts with reference to Jamshedpur City. In: UNSPECIFIED. Mishra, P N and Mishra, S N (2003) Prospects of digital information system and services in National Metallurgical Laboratory (CSIR), Jamshedpur. In: Prospects of digital information system and services in National Metallurgical Laboratory (CSIR), Jamshedpur. In: 48th Convention of Indian Library Association, 22-25 Jan 2003, Bangalore, India. Mishra, S C and Mishra, P C and Rout , K C and Anantapadmanabahn, P V (1999) Fly ash as a coating material for plasma spray coatings. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Mishra, S K (2002) Advanced Techniques for Surface Engineering of Industrial Materials. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Mishra, Sanak (2004) Some thoughts on Leadership and Knowledge. In: The excerpt of the lecture delivered by Dr. Sanak Mishra, 23/09/2003, Jamshedpur. Mishra, Suman K and Pathak, L C (2002) Self-Propagating High-Temperature Synthesis(SHS) of Advanced High Temperature Materials. In: Proceedings of the Indo-Malaysian Joint Workshop(WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur. Mishra, T (2010) Transition Metal Oxide-Pillared Clay Catalyst: Synthesis to Application. In: UNSPECIFIED. Mishra, T and Pal, S and Patel, J N and Bhattacharjee, S (2011) Study on arsenic removal capacity of iron oxide pillared montmorillonite clay from ground water. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Misra, D D (1989) Coal Washery Simulation a Basic Microcomputer Program. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri. Misra, D D (1997) Computer aided flow sheet design for fine ore circuits. In: UNSPECIFIED. Misra, D D (1998) Control of Comminution Circuit for Efficient Froth Flotation. In: Workshop on Froth Flotation: Recent Trends, September 22-24,1998, RRL Bhubaneswar. Misra, R A P (1958) Furnaces and Equipment used in the Manufacture and Heat Treatment of Alloy Steels. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Misra, R A P (1953) Investigation of Failures in Aeronautical Engineering. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Misra, R N and Bhatnagar, P P (1969) Nickel Resources in India and their Exploitation. In: UNSPECIFIED. Misra, R N and Bhatnagar, P P (1968) Nickel Resources in India and their Exploitation. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Misra, R N and Sampath, V S and Bhatnagar, P P (1961) The Scope for Development of Magnesium Industry in India. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Misra, S S and Rama Char, T L (1969) Recent Developments in Corrosion resistant non-ferrous metals and Alloys. In: UNSPECIFIED. Misra, S S and Rama Char, T L (1968) Recent Developments in Corrosion Resistant Non-ferrous Metals and Alloys. In: Symposium on Non-ferrous Metals Technology : Paper for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory(CSIR) Jamshedpur. Misra, V N (2002) Development of Waste Management Culture. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Misra , D D (1989) Electrical Seperation of Mineral Raw Materials. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri. Mitra, A (2001) Damage assessment of process heater tube by magnetic technique : a case study. In: UNSPECIFIED. Mitra, A (2001) Damage Assessment of Process Heater Tube by Magnetic Technique :A Case Study. In: UNSPECIFIED. Mitra, A (1997) Failure analysis by advanced magnetic techniques. In: UNSPECIFIED. Mitra, A and Panda, A K (2002) Giant Magneto-Impedance Behaviour in Ferro-Magnetic Materials. In: Proceedings of the Indo-Malaysian Joint Workshop(WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur. Mitra, A and Panda, A K and Pal, S K (2002) Magnetic Characterisation of Amorphous and Nanocrystalline Materials. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM - 2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Mitra, M S and Contractor, G P (1953) Mechanical Properties-A Scientific approach. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Moaveni, A Kamali and Noaparast, M and Rezai, B (2010) The effect of different parameters on the power draw of miduk copper concentrator sag mill. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Moazemi, M and Rezai, B (2010) Desilication studies of diasporic bauxite by thermochemical treatment. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Mohana Rao, S and Banerjee, B and Peravadhanulu, A (1985) Mineral Characterisation of some Indian Phosphatic depo-sits and its influence on their processing problems. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Mohanta, M K and Rath, R K and Sharma, Mamta and Soreng, D R and Mohanty, Sunati and Singh, Ranjeet K and Singh, Ratnakar (2011) Characteristics of Iron Ore Slime from Kiriburu, India. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udiapur. Mohanty, O N (2003) Challenge in R&D Management : Tata Steel A Case Study. In: UNSPECIFIED. Mohanty, O N (2002) Iron and Steel through the Ages and the Current Scenario. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario(ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Mohanty, O N and Jha, G (1998) Corrosion Control through Surface Modification. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur. Mohanty, Sunati and Nayak, B and Bhattacharyya, K K (2010) High intensity magnetic separation of iron ore slime and its limitations. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Mohapatra, B J and Singh, S K and Rao, D S and Martha, R K and Mishra, S (2010) Characterisation of BOG manganese ore associated with BIF in iron ore group, north orissa for its optimum utilization. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Mondal, G C and Singh, Abhay Kumar and Singh, T B and Tewary, B K and Sinha, Amlendu (2011) Wet and dry deposition of atmospheric pollutants around coal mining area of Dhanbad and Bokaro District. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Mondal, Sudipta and Pathak, L C and Venkateswarlu, K and Das, S K and Ray, Ajoy K (2002) Development and Characterization of Ag-Cu-Ti Alloys for Ceramic Brazing. In: Proceedings of the Indo-Malaysian Joint Workshop (WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur. Moorthy, K Balarama (1969) Current trends in the use of Zirconium Alloys. In: UNSPECIFIED. Morgan, S W K (1969) The Impact of the Imperial Smelting Furnace on Non-ferrous Metallurgy. In: UNSPECIFIED. Morgan, S W K (1968) The Place of the Imperial Smelting Process in Non-ferrous Metallurgy. In: Symposium on on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Mostyka, Yu and Shutov, V and Grebenyuk, L and Ahmetshina, I (2000) Investigation of Separation of Fine Materials in Strong Magnetic Fields. In: UNSPECIFIED. Mude, Rupla Naik and Panda, Soma Sekhara Balaji and Ghali, Venkata Subbarao and Muniyappa, Amarnath and Mulaveesala, Ravibabu (2011) Coded Excitation for Infrared Non-destructive Testing of Steel Materials. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries -NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Muduli, S D and Nayak, B D and Rao, D S and Mishra, B K (2011) Immobilization of CR (VI) in ferrochrome flue dust. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Mukherjee, J K (1966) Thermomechanical ausforming technique for producing substitute ultra high strength steels. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Mukherjee, J K and Chatterjee, G P (1957) Some Studies on Recovery & Oxidation Characteristics of Copper by Thermoelectric Phenomenon. In: UNSPECIFIED. Mukherjee, J K and Nijhawan, B R (1966) Some precipitation reactions in chromium-manganese- nitrogen stainless steels on aging and cold-working. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Mukherjee, K P and Lahiri, A K and Banerjee, T (1958) Effect of Low Alloy Additions on Corrosion of Steel in Different Atmospheres. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Mukherjee, M K and Gourishanker, S and Nair, M Janardanan (1968) Influence of thermal cycling on weldments of non-ferrous materials : I - Aluminium Alloy 6061. In: UNSPECIFIED. Mukherjee, M K and Gourishanker, S and Nair, M Janardanan (1968) Influence of Thermal Cycling on Weldments of Non-Ferrous Metal I. Aluminium Alloy 6061. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Mukherjee, R and Verma, S and Mohanty, B D and Rao, S Mohan and Suresh Kumar, T S (2011) Integration of iron ore deposit evaluation and mine plan for selecting cost effective beneficiation operations towards improved resource utilisation: Experience at Tata Steel. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Mukherjee, S P (2003) Measurement of Customer Satisfaction. In: UNSPECIFIED. Mukherjee, T K and Patra, R N (1998) Status of Waste Treatment in Titanium Mineral Industries. In: UNSPECIFIED. Mukhopadhyay, N K (1995) Basic Principles in Physical Metallurgy - II. In: Experimantal Techniques in Industrial Metallography[ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR), Jamshedpur. Mukhopadhyay, N K (1997) Failures due to hydrogen embrittlement. In: UNSPECIFIED. Mukhopadhyay, N K and Weatherly, G C and Embury, J D (1995) Electron microscopy of decagonal phases in Al-Cu-Co-Si system. In: 5th International Conference on Quasicrystals, MAY 22-26, 1995, AVIGNON, FRANCE. Muliyil, J A (1961) Recent Developments in the Welding of Light Metals & alloys. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Muliyil, J A (1957) Welding of Non-Ferrous Metals by the Argon Arc & Argonaut Processes. In: UNSPECIFIED. Muller, Paul H and Oehler, Roland E (1961) Latest Developments in Aluminium Reduction. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Mullick, U P (1966) Critical raw materials and substitutes in the light of India's self-sufficiency. In: Symposium on micro-metallurgy - The role of minute additions to ferrous and non-ferrous metals and alloys, March 29-April 1, 1965, Jamshedpur. Mullick, U P (1969) Refining of blister copper. In: UNSPECIFIED. Mullick, U P (1968) Refining of Blister Copper. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Munro, D and Poetschka, N (2000) Classification of Iron ore Fines at Hamerslev Iron's Paraburdoo Mine. In: UNSPECIFIED. Murali Sivaram, N and Kameswara Rao, K and Prabhakara Rao, K (1997) The Complications Involved in Processing Graphite Ore from Tapaskonda area, East Godavari district, Andhra Pradesh. In: UNSPECIFIED. Murthy, K S N and Pugazhenthy, L (1998) Recent Technology and Market Trends in Galvanizing. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur. Murty, D S R and Narasimha Rao, D L (1999) Fly ash and its use in cementitious material in civil engineering. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Muthuraman, B (2004) Development in Steel Research. In: The excerpts of the Lecture delivered by Shri B. Muthuraman, 26/09/2002, Jamshedpur. Myers Jay, O and Ovestrud, R M (1968) Modern core processes for the non-ferrous foundry. In: UNSPECIFIED. NNagabhushana, B R and Sanjeeva Reddy, N (1985) Crushing and Grinding : Practice and Problems in Kalyadi Copper Mine Concentrator. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpur. Naganoor, P C and Prasanna, A S R and Shivaprasad, K H and Bhat, K L (2000) Extraction of manganese from Ferro-manganese slag. In: UNSPECIFIED. Naik, A N (1973) Future of Sponge Iron in India and Plant Design Data. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Nair, N R and Mukherjee, T K (2000) Various aspects of fines in separation and processing of beach sand minerals in India. In: UNSPECIFIED. Narang, S K (1999) Coating, plating and paints developed in NML. In: National Seminar on coating, plating and paints, November, 1999, Koraput. Narang, S K (1987) Immersion plating of tin and its alloys on steel wires. In: ATM-87, 1987, Bangalore. Narang, S K (1998) Industrial Metal Finishing for Corrosion Control. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur. Narang, S K (2004) NML's Contributions in Corrosion, Failures & Mitigation. In: National Seminar on Corrosion Failures & Mitigation, 2004, NML Jamshedpur. Narang, S K (1979) A Unique anti-tarnish film by rhodium plating. In: All India seminar on precious metal plating, August 18, 1979, Bombay. Narang, S K and Mukherjee, A N (1999) Cathodic protection: introduction and recent developments. In: The 111th Asian-Pacific corrosion control conference, 1999, Vietnam. Narang, S K and Sharma, M L (1990) On-line bibliographic databases: relevant information retrieval on demand. In: National seminar on Management of information industry in 21st century, 1990, JTI, Jamshedpur. Narasimha, M and Brennan, M S and Holtham, P N (2010) Multi-phase modelling of hydrocyclone: validation of particle size distributions against sampling probe data. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Narasimhan, K S (1989) Flotation. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri. Narayanan, P I A (1957) Recent Researches on the dressing of Low-Grade Manganese Ores in India. In: UNSPECIFIED. Narayanan, P I A (1969) Vote of thanks. In: UNSPECIFIED. Natarajan, K A (2010) Biotechnological innovations in iron ore beneficiation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Nath, R and Mathur, A S and Mishra, R (1994) Integration of Mini Blast Furnace with Existing Electric Arc Furnace for Modernisation & Expansion of Usha Martin Mini Steel Complex at Jamshedpur. In: UNSPECIFIED. Nath, S K and Kumar, Sanjay (2010) Wear Resistant Ceramics from Fly Ash. In: National Seminar on Refractories & Furnaces for Energy Efficient & Environment Friendly Steel & Metal Processing, 09-10 September, 2010, CGCRI, Kolkata. (Unpublished) Natrajan, K A and Deo, Namita (2000) Mycrobially Induced Processing of Mineral Fines. In: UNSPECIFIED. Neterwala, D M (1997) Export of Ferro Alloys in the Changed conditions of Liberalised Economy. In: UNSPECIFIED. Nijhawan, B R (1953) Effects of Austenitic Grain Size & Other Factors on the Brittle Failure of Mild Steel. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Nijhawan, B R (1958) Indian Alloy Steels for Engineering Industries. In: Symposium on Production Properties and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Nijhawan, B R (1957) Indian Manganese Ore Industry & Scope for its Development. In: UNSPECIFIED. Nijhawan, B R (1959) Iron and Steel Industry in India. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Nijhawan, B R (1958) Micro-Metallurgy of Alloy Steels. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Nijhawan, B R (1959) Recent Trends in Iron and Steel Technology. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Nijhawan, B R (1959) The Role of National Metallurgical Laboratory in Ferrous Metallurgical Research and Development in India. In: Symposium on Iron & Steel Industry in India Organised by the National Metallurgical Laboratory, August, 1959, NML, Jamshedpur. Nijhawan, B R (1961) The Role of the National Metallurgical Laboratory in Research & Development of Light Metal Industry in India. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Nijhawan, B R (1966) Scope of research and development work on substitute alloys at the National Metallurgical Laboratory. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Nijhawan, B R (1953) Service Failures of Engineering Metal Components. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Nijhawan, B R (1960) Some aspects of Pilot Plant Research and Development in Iron and Steel Industry. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Nijhawan, B R (1958) Tailor-Made Alloy Constructional Steels. In: Symposium on Production, Properties & Applictions of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Nijhawan, B R (1958) Temper-brittleness: Part I - Unalloyed Steels. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Nijhawan, B R and Bucknall, E H (1958) Alloy Steel Industry in India - Historical. In: Symposium on Production, Properties & Applications of Alloy & Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Nijhawan, B R and Bucknall, E H (1954) A survey of Non-Ferrous Minerals & Industry in India. In: UNSPECIFIED. Nijhawan, B R and Chatterjea, A B (1958) Substitution of Alloying Elements by Grain Size Control of Alloy Steels. In: Symposium on Production, Properties, and Applications of Alloy and special Steel, Feb. 1-4, 1956, NML, Jamshedpur. Nijhawan, B R and Chatterjea, A B (1958) Temper-Brittleness: Part II- Alloy Steels. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Nijhawan, B R and Gupte, P K (1958) Manufacture in India of Ferro Alloys used in Alloy Steel Industry. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Nijhawan, B R and Gupte, P K and Bhatnagar, S S and Guha, B K and Dhanjal, S S (1966) Research and Development work on Substitute Nickel-Free Austenitic Stainless Steels. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Nijhawan, B R and Ranganathan, S (1957) Powder Metallurgy & its Application to Non-Ferrous Metals. In: UNSPECIFIED. Nijhawan, B R and Sharma, C (1966) Substitution of non-indigenous non-ferrous metals and alloys. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Nockels , W J B (1968) The Role of Aluminium and Aluminium Alloys in Engineering Industries. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Nockles, W J B (1968) The role of Aluminium and Aluminium alloys in Engineering Industries. In: UNSPECIFIED. Nodland, David and Ghosh, Arpita and Zargarzadeh, H and Jagannathan, S (2011) Neuro-Optimal Control of Helicopter UAVs. In: SPIE Defense, Security and Sensing, 25-29 April, 2011, Orlando, Florida, USA. OO'Neill, Hugh (1958) The Application of Alloy and Special Steels in Railway Work. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Offner, Walter W (1958) Fabrication and Inspection of Alloy Steel Piping. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Onal, Guven and Acarkan, Neset and Bulut, Gulay and Gul, Alim (2010) Recovery from complex ore by floatation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Onodera, S and Arakida, Y (1959) Effect of Gravity on the Macro-Segregation of Larger Steel Ingots. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Onodera, S and Tokuda, A (1959) Transformation Characteristics of Large Steel Forgings. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Ostler, F (1961) Modern Melting & Holding Furnaces for Light Metals. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. PPadhhl, K K and Chatterjee, A K and Pandey, L P (1997) Determination of tungsten in benificiation products of wolframite bearing granites from Degana area, Rajasthan. In: UNSPECIFIED. Padmanabhan, N P H and Suri, A K and Ghosh, S K (2010) R&D input to extraction of uranium from different primary and secondary resources in India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Pal, A T (1957) Removal of Aluminium from Copper-based Alloys to Ensure Pressure-Tight Castings. In: UNSPECIFIED. Pal, A T (1957) Valves of High-Nickel Alloys. In: UNSPECIFIED. Pal, B C and Pillai, R M and Satyanarayana, K G (1998) Light Metal Matrix Composites - Present Status & Future Strategies. In: UNSPECIFIED. Pal, S C and Mehta, K D and Abhilash, and Kumar, Vinay and Pandey, B D and Mankhand, T R (2007) Copper biodissolution from a low grade chalcopyrite ore by unadapted/adapted acidithiobacillus ferrooxidans. In: Proceedings of Mineral Biotechnology - 2007, 2007. Pal, Sital K and Prakash, S (2003) Management of Intellectual Property Rights in R&D Organisations. In: UNSPECIFIED. Palazzi, Aurelio and Colombo, Attilio (1959) Making and Properties of Mixed Magnetite-Hematite Pellets. In: Symposium on Iron & Steel Industry in India organised by the NML, Aug.'1959, NML, Jamshedpur. Palit, M R and Rudramuniyappa, M V (2010) Beneficiation studies on low-grade, limestone of Shahabad area, Shahabad, Gulbarga district, Karnataka. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Palit Sagar, S (2008) Advanced ultrasonic for remaining life assessment of industrial components. In: Remaining Life Assessment of Aged Components in Thermal Power Plants and Petrochemical Industries, 2008, NML Jamshedpur 831007, India. Palit Sagar, S and Prakash, Amit and Bandyopadhyay, D and Parida, N (2011) Feasibility of using ultrasonic technique to measure the blast furnace lining thickness. In: Advances in Analytical Techniques and Characterisation of Materials, July 5-7, 2011, RDCIS, Ranchi. Panchaxarimath, B P and Puranik, S C (2000) Recovery of gold from Plant/dump Liquors, Gadag Gold Fields, Karnataka, India. In: UNSPECIFIED. Panda, A K and Mitra, A and Chattoraj, I and Singh, S R and Ramachandrarao, P (2002) Development of Nanocrystalline FeNbCuSib based Alloy for Sensor Application. In: Proceedings of the Indo-Malaysian Joint Workshop(WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedepur. Panda, P K and Mariappan, L and Kannan, T S (1998) Preparation of Al2O3 - SiC In-Situ Composite Powder Mixtures by Carbothermal Reduction of Kaolinite. In: UNSPECIFIED. Panda, S and Panda, S K and Nayak, B D and Rao, D S and Pradhan, N and Sukla, L B and Mishra, B K (2010) Effect of thermal activation on recovery of copper using microorganisms from ball mill spillage. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Panda, S C and Kar, R N and Patra, P and Das, B (1996) Environmental and Waste Management in Some Mining Operations in Orissa. In: UNSPECIFIED. Panda, S C and Ray, H S (1996) Waste Management in Some Medium Sized Metallurgical Industries. In: UNSPECIFIED. Panda, S R and Barik, Anil (2011) Impact of iron ore mines generated pollutants on peripheral environment and its effective management—a case study of Koira region, Odisha. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Pandey, A K and Debnath, K K and Setua, D K and Mathur, G N and Chandra, R (1998) Butyl Rubber-Nylon Composites with Improved Flame Retardancy & Gas Impermeability. In: UNSPECIFIED. Pandey, B D (2011) Rare Metals Extraction from Non-ferrous Resources in India: Present Status and Prospects of R&D. In: 15th International Conference on Non-ferrous Metals 2011, 8-9 July 2011, Kolkata, India. Pandey, B D and Bagchi, D and Kumar, Vinay (1993) Co-Extraction-Selective stripping for the Recovery of Nickel & Copper from the Leach Liquor of ocean Nodules. In: Proceedings of ISEC' 1993, Sept. Pandey, J L and Rao, T B and Singh, S and Singh, S K (1998) Approaches to ISO certification - Paint manufacturing industry. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India. Pandey, L P (1994) Chemical Analysis and Standard Reference Materials. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants-(MMCA 1994), Janurary 18-20, 1994, National Metallurgical Laboratory, Jamshedpur. Pandey, O N and Sarkar, A K and Sharma, V N (1996) Growth of Certain Tree Species in Fly Ash Amended Soil. In: UNSPECIFIED. Pandey, P K and Dash, R R and Singh, M P (1998) Studies on the In-Situ Formation of AI2O3 - SiC Ceramic Matrix Composite from Tata Steel Colliery over Burden. In: UNSPECIFIED. Pandey, V M (1994) Analysis of Uranium in the Uranium Ores of India. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA 1994), January 18-20, 1994, National Metallurgical Laboratory, Jamshedpur. Pandey , H D and Bhattacharya, S and Maheshwari, G D and Prakash, OM and Mediratta, S R (1996) Research needs in environmental and waste management in iron & steel industries. In: UNSPECIFIED. Pandit, Ashwin S and Das, Siddhartha (2002) Plasma Sprayed Ceramic Coatings on Metallic Substrates. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Pani, Santosh and Dey, Shobhana and Mohanta, M K and Singh, Ratnakar (2010) An approach for recovery of iron values from slimes. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Pansare, J N and Samant, Roopali and Kulkarni, M M and Pandey, P K and Mani, T V (2011) Tailored clays for acid and effluent treatment. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Pantke, ING. H.D (1973) Purofer, Industrial Application of Direct Reduction. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Paranjpe, V G and Visvanathan, S (1958) Low-Alloy High-Strength Steels. In: Symposium on Production, Properties & Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Parbat, R N (1998) Environmental and Waste management in Non-ferrous Metallurgical Industries - Critical issues. In: UNSPECIFIED. Parida, N (1997) Application of acoustic emission testing in failure analysis: case studies. In: UNSPECIFIED. Parida, N (2008) Condition monitoring of pressure vessels and storage tanks by acoustic emission technique. In: UNSPECIFIED. Parida, N (2007) NDE techniques for corrosion monitoring in industrial systems. In: UNSPECIFIED. Parida, N (1999) Non-destructive testing and evaluation of cast materials. In: UNSPECIFIED. Parida, N and Palit Sagar, S (2011) Non-destructive Testing and Evaluation at CSIR-National Metallurgical Laboratory, Jamshedpur for Iron and Steel Industry: an Overview. In: International Conference on NDE for Steel& Allied Industries, 2-3 December, 2011, SNTI, Jamshedpur. Parker, R T (1968) Trends in the Improving Economic use of Aluminium. In: UNSPECIFIED. Parker, R T (1968) Trends in the Improving Economic use of Aluminium. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory(CSIR),Jamshedpur. Parker, R T and Jones, G L (1961) Some Aspects of the use of Aluminium in Substitution for other Materials. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Parkih, S C and Purohit, Anil and Verma, Vijay and Agarwal, L K and Singh, Ashish K (2010) Recovery of lead, silver and manganese from anode mud generated at zinc smelter Debari (Udaipur). In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Parthasarathi, M N (1968) The Position of Lead in a Challenging World of Modern Technology. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Parthasarthi, M N (1969) The Position of Lead in a Challenging World of Modern Technology. In: UNSPECIFIED. Parveen, Nikhat and Murthy, G V S (2010) Studies on ilmenite for applications as electronic materials. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Pashine, S K S and Narasimhan, K S (1985) Indigenous Production of Nickel and Cobalt. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Patel, R M (1966) Steel strip aluminising. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Pathak, L C (2002) Synthesis of Nano-Crystalline Ceramic powders by Chemical Process. In: Proceedings of the Indo-Malaysian Joint Workshop(WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur. Pathak, L C and Mishra, Suman K and Srikanth, S (1998) Effect of Silver on the Sintering Characteristics of High T Ceramic Superconductors. In: Proceedings of Composite Materials, March, 1998, NML Jamshedpur, India. Pathak, P N and Maulik, S C (1997) Physical method of upgradation for low grade wolframite pre-concentrate from Degana, Rajasthan. In: UNSPECIFIED. Pathak, P N and Ranganathan, M V and Chakraborti, D M (1985) A Review on Beneficiation Prospect of Some of the Graphite Deposits of Palamu District of Bihar. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Patil, D P and Nayak, U B (1985) Selective Flotation of Scheelite and Calcite. In: Proceeedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpur. Patil, M R and Nijagunappa, R and Prakash, S and Dixit, R R and Somasekar, B (1985) Studies on Suitability of High Grade Manganese Ore of Bahadurgatta area, Chitradurga District, Karnataka in the manufacture of Electrolytic Manganese Dioxide. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Patil, M R and Shivakumar, K S and Mahapatra, B K and Bhima Rao, R (1997) Characterisation and Liberation of Graphite Schist. In: UNSPECIFIED. Patil, Pravin J and Devi, Kadambini Devi and Rane, D M and Sen, Amit and Sonawane, A U and Hussein, S A (2011) Application of Radiation Sources in Steel Industry in India. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Patil, Shivraj V (1985) Inaugural Address. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of the Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Patnaik, H (1985) Sizing a mill - A Statistical Approach. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Patnaik, H (1989) Statistical Design of Experiment A Tool for Mineral Engineers. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri. Patnaik, N and Patil, M R and Bhima Rao, R (1997) Effect of Acid Leaching on Recovery of Graphite from Calcareous Deposits. In: UNSPECIFIED. Patnaik, S K and Murthy, P V R and Vidyasagar, P (2000) Importance of Synthetic Flocculants in Alumina Industry. In: UNSPECIFIED. Patra, P and Nagaraju, D R and Somasundaran, P (2011) Impact of pulp rheology on selective recovery of value minerals from ores. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Pattathil, Raghavan (2010) Technology development for kaolin processing. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Payne, John W (1960) Examples of the use of Pilot Plants to Obtain Engineering and Economic Information needed for Process Industrialization. In: Symposium on Pilot Plant in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Pelzl, Peter (1969) Horizontal continous casting of high-strength aluminium-bronze and other copper-base alloys. In: UNSPECIFIED. Pelzl, Peter (1968) Horizontal Continuous Casting of High-Strength Aluminium-Bronze and other Copper-Base Alloys. In: Symposium on Non-ferrous Metals Technologhy : Papers for presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory(CSIR) Jamshedpur. Peravadhanulu, A and Prasad Rao, P D and Mathur, G P (1979) Beneficiation of Kyanite and Sillimanite. In: UNSPECIFIED. Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Benefication of Lead and Zinc Ores. In: UNSPECIFIED. Peravadhanulu, A and Prasad Rao, P D and Mathur, G P and Altekar, V A (1979) Benefication Studies on Iron Ores from Orissa. In: UNSPECIFIED. Peter, J A and Neelamegam, M and Dattatreya, J K and Rajamane, N P (1999) Utilisation of flyash as cement replacement material to produce high performance concrete. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Petruk, William (1985) Role of Applied Mineralogy in Mineral Processing. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Pierce, E W (1953) A Summary of Some Typical Steel Failures in Machine Parts & Structural. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Ponomaryova, E I and Koizhanova, A K (2010) Redox processes in sulfide minerals biochemical solutions reactions. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Post, G (1973) The Optimum Method for Converting Sponge Iron to Steel in Arc Furnaces. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Prabhakar, S (2011) Column Flotation for the Beneficiation of Iron Ore Fines. In: International Conference on Iron and Steel Industry : Emerging Trends (Steelrise 2011), Feb. 1-2. 2011, National Metallurgical Laboratory, Jamshedpur. Prabhakar, S and Bhaskar Raju, G and Khangaonkar, P R (1986) Flotation of sulfide ores uding chelating agents. In: International Symposium on beneficiation and agglomeration, 17-19 December, 1986, Bhubaneswar. Prabhakar, S and Bhaskar Raju, G and Khangaonkar, P R (1989) Studies on ammoniacal leaching of copper oxide minerals. In: Int. Conference on base metal technology, 8-9 February 1989, NML Jamshedpur. Prabhakar, S and Bhaskar Raju, G and Misra, V N and Khangaonkar, P R (1990) Studies on the Flotation of Mixed Oxide-Sulphide Ores of Copper from Malanjkhand Deposit India. In: Minerals, Materials and Industry, 2-6 July 1990, Edinburgh, scottland. Prabhakar, S and Bhaskar Raju, G and Subba Rao, S and Vijaya Kumar, T V (2010) Column flotation technology — NML experience. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Prabhakaram, P (1998) Organic Coatings-- Basic Considerations of Protections of Iron and Steel. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur. Prabhakaram, P and Murthy, H P S (1961) A Study of the Production of Soederberg Paste from Indian Raw Materials. In: Symposium on Light Metal Industry in India, Feb. 14-17, NML, Jamshedpur. Pradip, (1998) Process Optimization in Flotation Separation Plants. In: Workshop on Froth Flotation : Recent Trends, Septembe 22-24, 1998, RRL Bhubaneswar. Prakash, Mayuri and Abhilash, and Mehta, K D and Pandey, B D (2009) Microbial composite for Cr(III) remediation from effluents. In: Proceedings of the X International Seminar on Mineral Processing Technology (MPT-2009), October 2009. Prakash, Ved (1968) Physical Metallurgy of Aluminium Alloys. In: Symposium on Non-ferrous Metals Technology: Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory(CSIR), Jamshedpur. Prakash, Ved (1966) Substitute magnetic materials. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Prasad, A B Krishna and Ravindran, Indira and Ravi, B P and Haran, N P and Majumdar, A (2010) Optimization flotation studies on a phosphorite sample from Jhamarkotra, Udaipur district, Rajasthan, India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Prasad, Anant (1990) Mathematical Modelling and Application to Solidification in vertical continuous Casting Mould. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedpur. Prasad, Bably and Sangeeta, Kumari and Tewary, B K (2010) Utilisation of geosynthetic liner for prevention of ground water contamination due to coal ash disposal in abandoned open cast mines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Prasad, K and Prasad, Lakshman and Rao, P V T (2010) Preparing superior grade raw materials to enhance the viability of Indian sponge iron sector. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Prasad, N B and Tendolkar, G S (1958) Application of Stainless Steels in Nuclear Technology. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Prasad, P and Singh, R (1995) Microstructural Studies in failed Samples. In: Experimental Techniques in Industrial Metallography [ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory (CSIR), Jamshedpur. Prasad, Ranjit and Chaudhary, Akhilesh (2010) Phase transformation of friable chromite ore during heating in the inert atmosphere. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Prasad, Ranjit and Shallika, Swati (2010) Molecular approach for phytoremediation and phytomining of metal-contaminated sites. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Prasad, Ranjit and Verma, Meenu and Kumari, Kriti (2010) The phytoavaibility and phytomining of uranium. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Prasad, Sanjay (2010) Kinetics of chromium extraction as sodium chromate from stainless steel dust. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Prasad , L (1969) Mineral Processing Plant Design and cost Estimate. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri. Prasad , L and Safvi, S M M (1985) Some Aspects of Coal Flotation at Washeries of Tata Steel. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Prasad , S S and Rao, S B (1968) Beneficiation of Bauxite. In: Symposium on Non-ferrous Metals Technologhy : Papers for presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory(CSIR) Jamshedpur. Prasad , T V and Bhaskar Rao, H V (1960) Development of Metallurgical Refractories with Indian Raw Materials - Pilot Plant Studies. In: Symposium on Pilot Plants in Metallurgical Research and Development , 15-18/02/1960, Jamshedpur. Premchand, and Jana, R K (1999) Processing of polymetallic sea nodules: An overview. In: Proceedings of the third (1999) ISOPE ocean mining symposium, Nov 08-10, 1999, Goa, India. Puvvada, G V K and Jana, R K and Pandey, B D and Bagchi, D and Kumar, Vinay and Premchand, (1997) Ammonia leach and solvent extraction for the recovery of valuable metals from roast-reduced polymetallic ocean nodules. In: 2nd ISOPE Ocean Mining Symposium, Nov 24-25, 1997, Seoul, South Korea. QQuarrell, A G (1958) Hydrogen in Steel. In: Symposium on Production, Properties and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. RRadhakrishnan, V R (1989) Control of Mineral Processing Operations. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri. Rafiuddin, S and Srivastava, J P and Chakaravorty, N (1985) Studies on Beneficiation of Ferruginous Manganese Ores using solid Reductants. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Raghu Kumar, C and Tripathy, Sunil Kumar and Mohanan, Srijith and Venugopalan, T and Suresh, N (2010) Evaluation of floatex density separator performance using silica sand. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Rai, S R and Sahay, P N (1985) Necessity of Particle size studies of Ores from Bihar by the Mineral Industry. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpur. Raj, Manish (2011) Ultrasonic Immersion C-Scan Imaging Technique : A Novel Tool to Evaluate and Optimize EMS Parameters for Continuously Cast Steel Billet Quality. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Rajak, K K and Yadav, B K and Mandal, R B and Saxena, V K and Mandre, N R (2010) Bio-desulphurization of makum (Assam) coal. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Rajan, T V and Saxena, M N (1968) Initial Softening in Some Aluminium Base Precipitation Hardening Alloys. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory(CSIR) Jamshedpur. Rajinikanth, V and Husain, Md Murtuja and Ray, Ajoy K (2010) Difffusion bonding of non weldable high alloy steel. In: National Welding Meet , August 2010, Puducherry. Ram, Mohan and Lal, S M (2010) Systematic characterization of bentonitic clay and its industrial significance. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Ram, S (1994) Fundamentals of Atomic and Molecular Spectroscopy in Instrumental Analysis. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (January 18-20, 1994), January 18-20, 1994, National Metallurgical Laboratory, Jamshedpur. Ram, S (2002) Hard Knock for Developing High-Energy-Density Ferromagnetic Bulk Amorphous Alloys. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario(ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Rama Murthy, Y and Rao, Chenna B and Kapure, Gajanan and Tathavadkar, V (2010) New prospective for the utilisation of Indian lateritic chromite overburden. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Ramachandrarao, P (2002) Is Steel a Sunset Industry ? In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario(ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Ramachandrarao, P (1995) Management Strategies for Corrosion free Performance of Power Plants - (No Full Text). In: Proceedings of the National Workshop on the Boiler Corrosion (NWBC-95), April 11-12, 1995, NML, Jamshedpur. Ramachandrarao, P (1999) Phase Diagrams. In: Proceedings of the workshop on Materials Characterization Techniques - Principles and Applications , January 19-20,1999, NML. Ramachandrarao, P (2002) Sustainable Development : Mining and Metals Sectors. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Ramadas, and Balasubramaniam, Krishnan and Joshi, Makarand (2011) Propagation Characteristics of Ao Mode in a Metallic Beam Containing a Semi-infinite Crack. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries -NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Ramakrishnan, P (1968) Recent Developments in Powder Metallurgy of Non-ferrous Metals. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Raman, P V and Narayanan, P I A (1968) Studies on Nundydroog Gold Ore with a view to Improving Gold Recovery. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Ramaswamy, S and Raghavan, P (2010) Investigations on a kaolin sample from kerala for possible value addition. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Rambabu, Ch. and Majumdar, K K (1985) Developments in Phosphate-rock beneficiation and the problems with Indian phosphorites. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Randhawa, N S and Agarwal, S and Sahu, K K and Jana, R K (2009) Recovery of copper, nickel and cobalt from manganese nodules by Arc furnace smelting. In: International conference of Non-ferrous metals 2009, July 10-11, 2009, Bhubaneswar. Randhawa, N S and Jana, R K and Das, N N (2011) Manganese Nodules Residue: Potential Raw Material for Fesimn Production. In: 15th International Conference on Non-ferrous Metals 2011, 8-9 July 2011, Kolkata, India. Randhawa, N S and Jana, R K and Das, N N (2011) Removal of Cd(II) Ions from Aqueous Solution by Adsorption Using Manganese Nodules Leaching Residue. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udiapur. Randhawa, N S and Mishra, D and Smita, K and Konar, J and Jana, R K (2010) Silicomanganese production from manganese nodules leach residue by blending with manganese ore. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Ranganathan, S (2005) How the Ferro Alloys Industries Can Benefits From Innovation in the Laboratory. In: Seminar on Ferro alloys and stainless steel - Opportunities, prospects & challenges, 30 Sept and 1 Oct, 2005, Bhubaneswar, India. Ranganathan, S (2004) Pre-Reduction of Chromite Ores. In: Proceeding of International Seminar on 1st Ferro Alloys India, 8-10 Feb 2004, Hyderabad, India. Ranganathan, S and Godiwalla, K M and Nath, Paras and Akbar, S A (2000) Influence of electrical parameters on the specific energy consumption and quality of ferrochromium produced in submerged arc furnace. In: 58th Electric Furnace Conference/17th Process Technology Conference, 2000, 58th Electric Furnace Conference. Ranganthan, M V and Chakravorty, N (1985) Experimental Processing of some of the Indian Clays for Chemical Purposes. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Rao, B Ashwath and Kumar, Abhishek and Sinha, S N (2010) A study of froth flotation of coal using artificial neural networks. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Rao, B S S and Goel , S K and Prakash Rao, M S (1985) Beneficiation of Bababudan Low Grade Magnetite ores - A Technical Appraisal. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpur. Rao, B Venkoba Rao and Gopalakrishna, S J (2010) Simulation studies on robustness of multi-stage gravity circuit performance by random perturbations. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Rao, D S and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2007) Effects of oxidation of minerals on physico-chemical properties pertaining to gravity separation. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur. Rao, K Anand and Sreenivas, T and Venkitakrishnan, R R and Serajuddin, Md. and Karthikayini, P and Padmanabhan, N P H (2010) A kinetic model for alkaline leaching of uranium from dolomitic limestone ore. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Rao, K Eswara and Ramesh, M and Suresh, K and Krishna, V Rama and Rao, D V Subba and Chaudhuri, S and Chattopadhyay, U S and Sharma, K K and Gouri Charan, T and Haldar, D D (2010) Laboratory flotation studies of imported coking coal fines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Rao, K Hanumantha (2010) Revisiting sulphide mineral flotation: a few priorities and directions. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Rao, K N P (1958) Alloy and Tool Steel Industry in India. In: Symposium on Production, Properties & Applications of Alloy & Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Rao, K N P (1959) Trend of Steel Demand in India. In: Symposium on Iron & Steel Industry in India organised by the NML, Aug.'1959, NML, Jamshedpur. Rao, K V and Vidyadhar, A (2006) Comparative Studies between Jigging and HMS for Lowering of Ash in a Coal Sample from Assam. In: International Seminar on Mineral Processing Technology (MPT-2006), March 8-10, 2006, Chennai. Rao, M S and Ram, Mohan and Gundewar, C S (2010) Process development for recovery of chromite values from COB plant tailing samples collected from various operating plants in Sukinda. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Rao, P V T and Sripriya, R and Mohanty, O N (2002) March Towards Green Steel Production-Efforts at Tata Steel. In: Clean Technologies for Metallurgical Industries (EWM - 2002), 24-25 January, 2002, CSIR - National Metallurgical Laboratory, Jamshedpur. Rao, R K (1973) A Study of Ring Formation of Sponge Iron in the Rotary Kiln. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Rao, T C (1989) Gravity Classification and Hydrocyclone. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, Balaipanda, Puri. Rao, T C (1985) Hydrocyclone - A useful Tool in Comminution Circuit. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of the Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Rao, T H and Rao, B V and Acharyulu, S L N (1968) Rapid Determination of Copper in Copper Ores. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Rao , Y K (1973) Recent Developments in the Kinetics and Mechanism of the Direct Reduction of Hematite with Solid Carbon. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Rastogi, M C and Das, B K L (1985) Simulated Model Studies on the Beneficiation of Calcareous Phosphate Ore. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Rath, R and Kar, S (2010) A numerical model for cyclic solid-liquid phase change. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Rath, R K and Dey, Shobhana and Mohanta, M K and Singh, Ratnakar and Kumar, Vinod and Bhattacharyya, K K (2007) Processing of low grade iron ore from Singhbhum-north Orissa craton using gravity concentration techniques. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur. Rath, R K and Kar, A K and Mohanta, M K and Singh, Ratnakar and Kumar, Anil (2011) Surface Chemical and Settling Studies on Hematite, Quartz and Kaolinite in Presence of Organic Reagents. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udiapur. Rath, R K and Mohanty, S and Mohanta, M K and Singh, Ratnakar and Bhattacharyya, K K (2011) Efficacy of enhanced gravity separator in processing indian iron ore slime. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udiapur. Rath, R K and Mohanty, Sunati and Mohanta, M K and Singh, Ratnakar and Bhattacharyya, K K (2011) Enhanced gravity separator in processing Indian iron ore slime. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udiapur. Rath, R K and Mohanty, Sunati and Singh, Ratnakar and Nayak, B and Bhattacharyya, K K (2010) Beneficiation response of a low grade iron ore from eastern India for the production of sinter and pellet feed. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Rath, R K and Singh, R and Bhattacharyya, K K (2011) Processing of Coal Waste by Enhanced Gravity Seperation and Froth Flotation. In: Proceedings of International Conference on Coal and Coke, April 7-8, 2011, National Metallurgical Laboratory, Jamshedpur. Ravindran, P A and Altekar, V A (1968) Some Experiences in Electro-winning of Aluminium from Fused Chloride Bath. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory(CSIR) Jamshedpur. Ray, Ashok K and Bandopadhyay, A and Srikanth, S and Das, S K and Antony, M P and Jha, Animesh (2000) Physico-chemical investigations on the sintering behaviour of red mud - flue dust composites. In: Processing of fines: International symposium, November 2-3, 2000, NML Jamshedpur, India. Ray, Ashok K and Roy, Nilima (2002) Modelling of Elasto-Plastic Deformation and Crack Propagation Studies in Thermal Barrier Coated Superalloys. In: Proceedings of the Indo-Malaysian Joint Workshop(WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur. Ray, Ashok K and Tiwari, Y N and Sahu, J K and Swaminathan, J and Roy, P K and Sinha, S K and Das, Goutam and Ghosh Chowdhury, S and Kumar, P and Chaudhuri, S (2001) Effect of Oxide Scale Deposition on the Residual Life of Service Exposed Reheater Tubes in Boiler of a Thermal Power Plant. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Ray, H S (2002) Some Barriers to Clean Technologies. In: Clean Technologies for Metallurgical Industries - (EWM - 2002), 24-25, January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Ray, P K and Kumaraswamy, A and Bandopadhyay, A and Rao, T C (1985) Performance Studies on the Crushing and Screening Circuit at South Bank Treatment Plant of Hindustan Copper Ltd. In: Processing of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Ray, S C (1999) Sintered fly ash aggregate Chinese technology at a glance. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Rayalu, S and Meshram, S U and Labhasetwar, N K and Biniwale, R and Khanna, P (1999) New frontiers for high value utilisation of fly ash : production of zeolites. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Reddy, I G (1985) Energy Requirements in Size Reduction of Solids. In: Proceddings of National Seminar on Mineral Processing and IX Annual Technical Convention of the Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpru. Reddy, P Gopala and Nijagunappa, R and Kumar, G S and Gopalakrishna, S J and Patil, M R and Somasekar, B (1985) Flotation Studies on Low Grade Magnesite Deposits from Sujikonda near Daroji Bellary district, Karnataka State. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Reddy, R Purushotham and Nayak, U B (1985) Flotation of Low Grade Copper ore from Kallur, Raichur District, Karnataka. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Reeve, M R (1961) Present Trends in Methods of Production of Aluminium Alloy Slabs and Billets for Working. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Reja, Yogesh and Garg, Pallav and Gupta, V K (2010) A model for simulation and control of open-circuit rod milling operation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Rezai, B and Rahimi, M and Aslani, M R and Eslamian, Atiye and Dehghani, F (2010) Relationship between surface roughness of minerals and their flotation kinetics. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Rhines, F N and Anderson, W A (1966) Substitute solders. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Rodriguez, Placid (2004) Non-Destructive Evaluation: Science and Technology. In: The excerpts of the lecture delivered by Dr. Placid Rodriguez, 26/11/2002, Jamshedpur. Rodriguoz, P and Arunachalam, V S (1968) Influence of Interstitials on the Mechanical Properties of Group IVb Metals. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec.1968, CSIR - National Metallurgical Laboratory, Jamshedpur. Rosenkranz, Jan (2010) Pressure agglomeration in solids processing— fundamentals and recent developments. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Ross, H U (1973) The Fundamental Aspects of Iron Ore Reduction. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Routray, Sunita and Rao, R Bhima and Padhi, L N and Mishra, B and Panda, B K (2010) Recovery of placer zircons from konark— ramchandi beach and dunes and its value addition for refractory industries. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Roy, Animesh and Srivastava, R R and Smita, K and Mishra, D and Agrawal, A and Hait, Jhumki and Sahu, K K (2010) Acid pressure dissolution of matte produced from the alloy obtained from direct smelting of sea nodules. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Roy, Bhaskar (2010) Utilisation of india’s iron ore resources— present situation and future possibilities. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Roy, Rajat K and Sarkar, Partha and Singh, Satnam and Panda, A K and Mitra, A (2011) Crystallization kinetics and giant magneto impedance behavior of FeCo based amorphous wires. In: TMS 2011, 27 Feb- 3 March, 2011, San Diego, CA, USA. Roy, S N (1961) Scope of Light Alloy Metallurgy in Armament Research. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Roy, Subrata and Das, Avimanyu and Sarkar, B and Bhattacharyya, K K (2007) Separation response of iron ores during gravity concentration. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur. Roy, T K (2002) From Waste to Wealth: A Study in Waste Management and Recycling. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM - 2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Roychoudhury, S K and Aush, S C and Som, P K (1968) Studies in Chlorination : Part I - Magnesite. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Russell, J E and Ludgate, B (1958) The Effect of Variation of Ruling Section on the Mechanical Properties of Carburizing Steels. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. SSah, Rakesh and Dey, S K and Vidyadhar, A and Das, Avimanyu (2010) Investigation on the applicability of advanced gravity separation for cleaning semi coking coal fines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Saha, P (1999) Light-weight aggregates for advanced civil engineering. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Sahu, B K (2010) Optimal liberation of ore minerals for ore beneficiation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Sahu, K C (1999) Characterization and utilisation of fly ash. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Sahu, K K (2002) Hydrothermal Synthesis and Microstructural Control of Hematite Particles. In: Proceedings of the Indo-Malaysian Joint Workshop(WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur. Sahu, K K and Agarwal, S and Ojasvi, and Mishra, D and Agrawal, A and Konar, J and Minj, R K and Godiwalla, K M (2010) Removal of manganese and iron from the alloy obtained from direct smelting of sea nodules. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay and Mankhand, T R (2010) A comparative performance of two resins based on polysterene for removal of chromium(III) from tannery solution. In: Environmental Management in Metallurgical Industries, March 15-16, 2010, Banars Hindu University, Varanasi. Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay and Mankhand, T R (2008) Extraction of trivalent chromium from tannery effluent by ion exchange with indion 790 resin. In: International Seminar on Mineral Processing Technology (MPT-2008) , April 22-24, 2008, National Institute for Interdisciplinary Science & Technology, CSIR, Trivandrum. Sahu, S K and Sinha, Manish K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2011) Solvent Extraction of Copper and Zinc From a Pickling Solution Using Versatic 10 Acid, Cyanex 272 and LIX 984N. In: International Congress & Exhibition, Non-Ferrous Metals-2011, September 7-9, 2011, Krasnoyarsk, Russia. Salem, Eng. M W (1973) Reducibility of Aswan Ore and Sinters with Varying Basicity Ratios. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Sane, R Y and Subramanian, N A and Kothari, S V and Pashine, S K S (1985) Conservation of high Phosphorous high Manganese ores by Sintering of Dephosphorised concentrate. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Sanyal, P and Saha, S K and Khare, R N (1985) Grind Optimisation Studies at Rakha Concentrator by Laboratory Tests. In: Proceedings of the National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Sarangi, B M and Kesav, Babu and Sheshadri, M K (2002) Environmental Control Measures in Sponge Iron Industry with Particualr Reference to Tata Sponge Iron Limited. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Sarkar, B and Chandrasekhar, S and Das, Avimanyu (2007) Advanced gravity separators - A review of state of the art technology. In: Advanced Gravity Separation, Aug 30 - Sept 1, 2007, NML Jamshedpur. Sarkar, Jaydeb (2002) Use of Metallic Materials as Medium of Architectural Expression. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario(ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Sarmah, Mridusmita and Khare, Puja and Baruah, B P (2010) Pyrolysis of high sulphur coals: possible sulphate aerosol formation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Sastri, S R S (1998) Column Flotation: Theory and Practice. In: Workshop on Froth Flotation:Recent Trends, September 22-24,1998, RRL Bhubaneswar. Saxena, Mohini and Asokan, P (1999) Coal ash utilization in building and agricultural applications. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Saxena, V K and Varma, Atul K and Kumar, Gunjan (2010) Effect of stamping and binder on coke quality for LVMC Coal. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Schjelderup, G (1959) ELPIT-The Electric Soaking Pit. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Scortecci, A (1959) Colour Metallography of Ferrous Alloys and its Applications to iron and Steel Making. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Scott, D (1968) Study of Hard Non-ferrous Materials for Arduous Conditions of Rolling Contact. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Scott, D (1966) Substitute alloys as bearing materials. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Seehra, S S and Krishnmurthy, (1999) A study on techno-economic aspects for highway projects. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Sekhar, Chandra K (1994) AAS - A Tool for Monitoring Trace Metals in Environment. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA - 1994), January 18-20, 1994, National Metallurgical Laboratory, Jamshedpur. Sen, B L (1959) Refining of Indian Pig iron in an Experimental L-D Oxygen Converter(II). In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Sen, B L and Nijhawan, B R and Chatterjea, A B (1959) L-D Oxygen Converter (1). In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Sen, P K (2010) Exergy analysis of mineral processing flow sheets: implications in process design. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Senapati, Bimalananda and Kumar, C Satish and Banerjee, Tonmoy (2011) Water management at Vedanta aluminium Ltd., Lanjigarh refinery. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Sengupta, A K and Banerjee, T H and Ram, Mohan (2010) Beneficiation of iron ore fines from mine rejects. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Sengupta, B L and Chatterjea, A B and Mathur, G P and Altekar, V A (1973) Operational Aspects of Sponge Iron Production in a Rotary Kiln. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Sengupta, P L and Dhananjayan, N (1985) Crushing and Grinding of Electrodeposited Manganese Dioxide. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Serajuddin, Md. and Rajan, K C and Anand Rao, K and Sreenivas, T and Padmanabhan, N P H (2010) Filtration studies on a limestone hosted uranium ore leached slurry. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Sewell, J F (1958) The Molybdenum-Boron Structural Steel. In: Symposium on Production, Properties, and Applications of Alloy and Special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Shahani, M J and Banerjee, T (1960) Metallurgical Pilot Plants. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Shaik, Shamshad and Bagchi, Sudeep and Ghosh, S and Mukherji, A K (2010) Beneficiation of iron ore fines to improve blast furnace productivity. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Shankargouda, M and Eligar, Suresh and Swamy, Gurubasayya and Sri Raghava, T J (2010) Adaptation of efficient thickeing technology in the circuit for economical recovery of gold at Hutti gold mine. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Sharan, Rajendra and Swarup, D (1961) Determination of Vacant Lattice Sites in Aluminium Alloys by X-ray Diffraction Technique. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Sharma, Abhishek and Rai, Nandani (2010) Effect of burnt lime addition on sintering of iron ore fines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Sharma, B D and Tiwari, G P and Ray, S P (1968) Diffusion in bcc Transition Metals. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Sharma, Hemant and Chauhan, Ravi and Srivastava, V C (2005) Development of Ultra High Strength and Nanocrystalline Materials by Accumulative Roll Bonding. In: International Conference on Materials Science and Technology(MS&T05) (American Society of Metals), September 27-30, 2005, Pittsburgh, Pensylvania. Sharma, K K and Sinha, K M K and Gouri Charan, T and Haldar, D D (2010) Generation of fines by crushing the raw coal to different sizes and effects of lab flotation tests on its results using these coal fines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Sharma, Mamta and Singh, A K and Choudhury, Nandita and Bhattacharyya, K K (2010) Petrography of beneficiated heat altered coals from damodar valley coalfields, India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Sharma, P and Hue, K and El-Shall, H and Powers, K and Moudgil, B (2011) Nano, bio and mineral technologies—mutual leveraging for product and process innovations. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Sharma, R K and Patel, L R and Bhatt, M M (2001) On Line Chemical Cleaning of Critical Heat Exchangers for Cooling Water Deposit and their Control to Sustain High Production Level of Methanol - An Experience and Case Study at GNFC. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Sharma, R N (1985) Coal Beneficiation - Application of Froth Flotation. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of the Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Sharma, R P and Basu, G S and Prasad, S B and Dhillon, A S (2002) Steel Industry and Climate Change. In: Clean Technologies for Metallurgical Industries (EWM)-2002, 24-25, January, 2002, CSIR- National Metallurgical Laboratory, Jamshedpur. Sharma And, C and Banerjee, T (1968) Non-ferrous Metals in India. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Sheth, K G and Sundararajan, J and Rama Char, T L (1961) Corrosion of Aircraft Aluminium Alloys in Acid Solutions & its Prevention by Inhibitors. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Shimoda, Hideo and Onodera, S (1953) A Contribution to the Service Failure of Large Chilled Iron Rolls due to Fatigue. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Shrader, H and Pranjpe, V G (1953) Factors Influencing the Formation of Flakes in Steel. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Shukla, S and Bhunia, K and Kundu, G and Mukherjee, D (2010) Study of liquid phase mixing characteristics in flotation column. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Shukla, S K and Natrajan, R and Das, K K and Krishnan, R R V and Subrahmanyam, N P and Rao, N K (1985) Improving Scheelite Recovery from Gold Tailings. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Shyamsunder, M T (2011) Advances in Electromagnetic NDE and its Applications to the steel and allied industries. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Singh, A J and Mathur, B S (1968) Preparation of Electronics Grade Bismuth, Antimony, Tellurium, Cadmium and Zinc by Vacuum distillation and Zone refining. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Singh, Akhileshwar and Singh, J P (1985) Need for Utilisation of Leaner and Unmarketable ores of Bihar by Innovation in ore dressing and Metallurgical Process. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Singh, D D N (1997) Pickling, Rinsing and Fluxing of Steels before Galvanizing. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur. Singh, D D N (1997) Post Treatment of Galvanized Coating to Improve Corrosion Resistance. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur. Singh, D D N (1998) Role of Concrete and Steel Surface on Performance of Structures. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur. Singh, D D N (1995) Various forms of water side Corrosion: Causes & Prevention. In: Proceedings of the National Workshop on Boiler Corrosion(NWBC-95), April 11-12, 1995, NML, Jamshedpur. Singh, D D N and Dey, A K and Dey, M and Singh, B K (1998) Corrosion characteristics of HSLA steels in sea water. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India. Singh, D D N and Dey, A K and Khan, I (1998) Passivation of galvanized surfaces to improve their corrosion resistance. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India, . Singh, D D N and Dey, Mahuya (2001) Studies on Performance of Galvannealed Coatings and Other Type of Zinc Coatings. In: National Seminar on Corrosion and Its Prevention (NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Singh, D D N and Ghosh, Rita (2001) Corrosion Resistance Performance of Fusion Bonded Epoxy Coated Rebars. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Singh, D D N and Ghosh, Rita (2005) Protective Coatings for Steel Bars in Reinforced Structures. In: 3' International Symposium on Surface Protective Coatings, November, 14-16, NML, Jamshedpur. Singh, D D N and Singh, B K (1998) Effect of mixed cations on phosphate coating of steel. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India. Singh, Gurdial and Dey, M L and Dhananjayan, N (1985) Chemical Beneficiation of Magnesite. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Singh, I (1998) Atmospheric corrosion of 18 years study. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India. Singh, I and Bhattamishra, A K (1998) Corrosion behaviour of magnesium alloys in chloride medium. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India. Singh, I and Mukherjee, A N (1998) Corrosion of tinned sheets during transportation - A case study. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India. Singh, Inder (1995) Inhibitors for Boiler-Water Corrosion. In: Proceedings of the National Workshop on the Boiler Corrosion (NWBC-95), April 11-12, 1995, NML, Jamshedpur. Singh, Inder and Mukherjee, A N (1998) Corrosion of Tinned Sheets during Transportation-A Case Study. In: Proceedings of International Conference on Corrosion CORON-97 Nehru Centre, Mumbai, India, 3-6, December, 1997, NML, Jamshedpur. Singh, Janardan and Bhatia, B S (1997) Effect of Steel Composition on Zinc Coating and Pot Failure. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur. Singh, K K and Mankhand, T R and Sinha, S N (2010) High temperature treatment of waste printed circuit boards to recover valuable metals. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Singh, K K and Mondal, N and Choudhary, R B and Mishra, A K and Prasad, R R and Avtar, Ram and Mukerjee, D and Bhattacharya, G and Biswasroy, J K and Singh, Wakil (2011) Detection of Defects on Cold Rolling Mill (CRM) Rolls with Ultrasonic and Eddy Current Flaw Dectors. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries -NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Singh, K M P and Udayabhanu, G and Gouri Charan, T and Haldar, D D (2010) Flocculation studies on non-coking coal fines using suitable reagents. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Singh, M N and Basu, D K and Bhattamishra, A K and Narang, S K (2002) Corrosion resistant electrodeposited zinc coating from zinc dross. In: CORCON 2001, 28-30 Nov 2002, Goa. Singh, M N and Singh, I (1998) High temperature resistant slurry based coating for steel. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India. Singh, Manjit and Kumar, Rajendra (1968) Founding Properties of Non-ferrous Liquid Metals. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Singh, O N (1994) Industrialization and Pollution. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA-1994), January 18-20, 1994, National Metallurgical Laboratory, Jamshedpur. Singh, R J (2002) Utilisation of Waste- A Novel Approach Towards Cleaner Environment. In: Proceedings of Resurgence of Metallic Materials the Current Scenario-ROMM 2002, Oct. 24 & 25, 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Singh, R N and Basu, D (1985) Coal Processing in Indian Context. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Singh, Raghubir (1995) Some Case Histories of Failure of Reheater Tubes. In: Proceedings of the National Workshop on Boiler Corrosion (NWBC-95), April 11-12, 1995, NML, Jamshedpur. Singh, Raghuvir (2011) Different Forms of Corrosion in Industries. In: lndustrial Corrosion and Protection in Coastal & Other Environments, Feb - 2011, HIT. Singh, Raghuvir and Das, Goutam and Suman, Satyarth and Singh, P K (2008) Response of Weld Joints in Stainless Steel 304LN Pipe to Low Temperature Sensitization. In: IIW- IC-2008 Chennai, 8-10 January, 2008, Chennai. Singh, Raghuvir and Dey, P K and Kumar, A and Das, S K and Kumar, Ravi and Chattoraj, I (2001) Intergranular Corrosion of Deformed SS304. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Singh, Ratnakar (1998) Development of Flotation Reagents with Chelating Functional Groups. In: Workshop on Froth Flotation : Recent Trends, September 22-24,1998, RRL Bhubaneswar. Singh, Ratnakar and Banerjee , B and Bhattacharyya, K K and Srivastava, J P (2006) Upgradation of Barite waste to Marketable Grade Concentrate. In: Proceeding of the XXIII International Mineral Processing Congress, 2006, IMPC. Singh, Ratnakar and Chandrashekhar, S and Rath, R K and Nayak, B and Bhattacharyya, K K (2008) Designing Process for Concentration of a Low Grade Copper Ore. In: International Seminar on Mineral Processing Technology (MPT-2008) , April 22-24, 2008, Trivandrum,INDIA. Singh, Ratnakar and Das, Avimanyu and Dey, Shobhana and Vidyadhar, A and Rath, R K and Bhattacharyya, K K (2006) Beneficiation of Indian Coking Coal Fines- An Alternate Circuit for Improved Performance. In: International Seminar on Mineral Processing Technology (MPT-2006), March 8-10, 2006, Chennai. Singh, Ratnakar and Rao, D S and Banerjee, B and Bhattacharyya, K K (2008) Development of Flotation Process for Enrichment of Ganesh-Himal Lead-zinc Sulphide Ore from Nepal. In: Proceedings of XXIV International Mineral Processing Congress, 24-28 SEPTEMBER 2008, BEIJING CHINA. Singh, Ratnakar and Rath, R K and Nayak, B and Bhattacharyya, K K (2011) Development of process for beneficiation of Low-grade iron ore samples from Orissa, India. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udiapur. Singh, Ratnakar and Sengupta, P L and Pathak, P N and Chattopadhyay, A and Maulik, S C (2001) Floatation Studies on Processing of a Low Grade Uranium Ore. In: International Conference on Challenges in Coal and Mineral Beneficiation, , NML, Jamshedpur. Singh, Ratnakar and Sinha, S N (2005) Influence of Operating Variables on Flotation of High Ash Coking. In: International Seminar on Mineral Processing Technology(MPT-2005), January 6-8, 2005, Indian School of Mines, Dhanbad. Singh, Ratnakar and Singh, P (2002) Studies on De-Ashing of Non-Coking Coal by Froth Flotation. In: Proceedings of the International Seminar on Mineral Processing Technology , MPT-2002, 3-5 January 2002; Vol.1 (2002 ) 243-249 ; Eds. S . Subramanian , K.A. Natarajan , B.S. Rao and T . R.R. Rao, MPT-2002. Singh, S K and Singh, A K and Sarangi, A K (2010) Flocculation and filtration studies on uranium ore slurry using some commercial flocculating agents. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Singh, S R (1998) Characterization of Corrosion Related Failures. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur. Singh, S R (1995) Principles of Optical and Electron Microscopy. In: Experimental Techniques in Industrial Metallography [ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR), Jamshedpur. Singh, T B (1998) Protective Nature of the Surface film Formed on the Weathering Steel. In: National Workshop on Surface Engineering in Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur. Singh, T B and Lal, Kishori and Mohanty, R K (1998) Corrosion behaviour of rapidly solidified lead-aluminium alloys for battery grids. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India. Singh , Inder (1997) Corrosion Behaviour of Galvanised Products. In: Workshop on Hot Dip Galvanizing - HODGA-97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur. Sinha, A N (1995) Image Analysis & Quantitative Metallography. In: Experimental Techniques in Industrial Metallography [ETIM - 95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory (CSIR), Jamshedpur. Sinha, A N (1995) Specimen Preparation for Optical Microscopy. In: Experimental Techniques in Industrial Metallography [ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR), Jamshedpur. Sinha, D P and Singh, Kanhaya and Sanyal, S K and Pandey, S N (1968) Chemical and Electrochemical Studies on Chromate Passivation of Brass. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2010) Extractive separation and recovery of hydrochloric acid and iron values from spent pickle liquor. In: XI International Seminar on Mineral Processing Technology (MPT-2010), 15 - 17 December, 2010, NML, Jamshedpur. Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2011) Solvent extraction and separation of copper and zinc from a pickling solution. In: 15th International Conference on Nonferrous Metals 2011, 7-8 July 2011, Kolkata,India. Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2009) Recovery of acid and iron values from the spent pickle liquor by solvent extraction. In: NMD - ATM 2009, November 14, 2009 to November 17, 2009, Science City Complex,Kolkata, India. Sinha, N C and Sanyal, J M and Das Gupta, N N and Lahiri, A (1959) Correlations among some Physical Properties of Coke - a Statistical Study. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Sinha, S N and Agrawal, M K and Prasad, R B and Singh, K K (2002) Proper Management of Metallurgical Wastes - A Paramount Necessity for clean Environment. In: Clean Technologies for Metallurgical Industries - (EWM - 2002), 24-25, January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Sivaiah, S and Rafiuddin, S (1985) A Simple Sub-sieve sizer employing elutriation with water. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Sivaprasad, S and Paul, Surajit K and Tarafder, S and Gupta, Suneel K and Bhasin, Vivek (2011) Cyclic plastic deformation behaviour of PHT piping materials - an experimental investigation. In: 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21), 6-11 November, 2011, New Delhi, India . Sivaramakrishnan, C S (1995) Physical Metallurgy of Aluminium. In: Experimental Techniques in Industrial Metallography [ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR), Jamshedpur. Sivaramakrishnan, C S and Choudhuri, S P (1998) Role of Thermomechanical Treatments on Mechanical Prope-rties, Microstrucures and Corrosion Properties of Micro-alloyed Steels. In: National Workshop on Surface Engineering for Corrosion Control, Dec. 22-23, 1998, NML, Jamshedpur. Smita, K and Srivastava, R R and Mishra, D and Sahu, K K and Singh, T B and Agrawal, A and Jana, R K (2010) Recovery of valuable metals from sea nodules through reduction-roasting ammonia leaching process. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Som, P K and Chakravarti, P B and Banerjee, T (1961) Electrolytic Production of Magnesium & Magnesium Alloys. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Sontakkey, V A and Rao, M S and Ram, Mohan (2010) Development of simple process flowsheet for a silica sand sample to produce high grade silica sand concentrate from Ratnagiri district, Maharashtra. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Sreenivas, T and Rao, K Anand and Rao, M Manmadha and Rajan, K C and Serajuddin, Md. and Karthikayini, P and Padmanabhan, N P H (2010) Autoclave leaching of refractory uranium minerals. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Sriamoju, S K and Suresh, A and Lingam, R K and Ray, Tathagata and Dash, P S and Banerjee, P K (2010) Determination of diffusion coefficient for coal leaching process. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Srikanth, S and Alex, T C and Agrawal, A and Premchand, (1997) Reduction roasting of deep sea manganese nodules using liquid and gaseous reductants. In: 2nd ISOPE Ocean Mining Symposium, Nov 24-25, 1997, Seoul, South Korea. Srinivasan, N and Tendolkar, G S (1960) Proposed Pilot Plant for Production of Sintered Beryllium Oxide from Berylore. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Srinivasan, N and Cook, Albert R (1968) New Finishes for Zinc Alloys. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Srivastava, A K and Jaggi, T N (1985) Beneficiation of Fertilizer Minerals - Saladipura - An Experience. In: Proceedings of National Seminar on Mineral Processing and IX Annual Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpur. Srivastava, R K (1968) Aluminium Die Castings in Automibiles. In: Symposium on Non-ferrous Metals Technology: Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory(CSIR), Jamshedpur. Srivastava, V C and Singh, Mirtunjay and Kumar, Tipu and Sahoo, K L (2011) Effect of Al-alloy composition and foaming temperature on pore size, density and mechanical properties. In: International Conference on Porous Metals and Metallic Foams (MetFoam-2012), September 18-21, 2011, Busan, Korea. Srivastava, V C and Singh, T and Kumar, S and Ghosh Chowdhury, S and Jindal, Vikas (2007) Microstructural Characteristics of Accumulative Roll Bonded Ni-Al Based Metal Intermetallic Laminate Composite. In: International Conference on Recent Advances in Composite Materials, 2007, New Delhi, India, February 20-23, 2007, New Delhi. Srivastava, V C and Surreddi, K B and Scudino, S and Schowalter, M and Uhlenwinkel, V and Schulz, A and Rosenauer, A and Zoch, H -W (2009) Novel microstructural characteristics and properties of spray formed Al-RE-TM based alloys. In: International conference on Spray forming, 2009, September 7-9, 2009, Bremen, Germany. Srivastava, Y P (1994) Instrumental Methods of Analysis for the Process and Quality Control in Iron and Steel Industry. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA 1994), January 18-20,1994, National Metallurgical Laboratory, Jamshedpur. Srivastava , S C (1994) Recent Trends in X-Ray Fluoresence Spectrometry and its Applications in Instrumental Analysis. In: Proceedings of the Workshop on Modern Methods of Chemical Analysis for Minerals Metals and Pollutants (MMCA -1994), January 18-20, 1994, National Metallurgical Laboratory, Jamshedpur. Starman, S and Matz, V (2011) Automated System for Crack Detection using Infrared Thermographic Testing. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Starman, S and Matz, V (2011) Real Implementation of Ultrasonic Phased Array Technology Using Advanced Signal Processing Algorithms. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Statsjuk, V N and Kenzhaliev, B K and Fogel, L A (2010) Elecrocemical formation of semiconductor nanocrystalline thin films from complex electrolyts. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Subramanian, M and Misra, R N and Bhatnagar, P P and Nijhawan, B R (1966) Economic utilization, recovery and substitution of some strategic non-ferrous metals. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Subramanian, S and Chockalingam, Evvie and Braun, J J (2010) Studies on acid production potential of mine tailings and bioremediation of acid mine water from an abandoned indian copper mine. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Subramanian, V R (1997) Galvanizing Industries in India - Present Scenario. In: Workshop on Hot Dip Galvanizing - HODGA -97, 6-7, January 1997, National Metallurgical Laboratory, Jamshedpur. Sukharnikov, Yu I and Yefremova, S V and Zharmenov, A A (2010) Some advanced materials from the rice processing waste and their application in various branches of industry and agriculture. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Suleimenov, E N and Mahato, M M (2010) Changes in melted slag structure with their temperature change. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Suleimenov, E N and Mahato, M M (2010) Melted slag and electric current. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Sundaracharlu, R (1958) A Consumers Appreciation of the Symposium. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Suresh, A and Ray, T and Dash, Pratik S. and Banerjee, P K (2010) Coke property prediction from coal blend properties using ANFIS model. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Sutton, C R and Geiger, G F (1958) Heat and Corrosion-Resistant Alloy Castings of the United States of America. In: Symposium on Production, Properties and Applications of Alloy and special Steels, Feb. 1-4, 1956, NML, Jamshedpur. Swain, Ranjita and Rao, R Bhima (2010) Leaching kinetics for iron from partially laterised khondalite rocks by hydrochloric acid solution. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Swaminathan, J and Singh, Raghubir and Das, Swapan K and Das, Goutam (2006) Failure Analysis of Welded Reformer Tubes of a Fertilizer Unit. In: Proceeding of the International Conference & Exhibition on Pressure Vessels and Piping, 7-9, February 2006, Chennai. Swarup, D and Bashforth, G Reginald (1960) The Relation of Pilot Plants to Full Scale Operation. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. TTamrakar, P K and Prajapati, D and Sarangi, A K (2010) Study of leaching characteristics on low grade uranium ore of bagjata mine. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Tarafder, S and Gupta, K K (2004) Estimation of Uncertainty in Mechanical Testing. In: Refresher Course on ISO/IEC 17025 Standards, 27-28 Aug 2004, Kolkata. Tavazzi, F (1959) Ten Years of Experience in Executives Training for a Large Group of Iron and Steel Companies. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Ter haar, L W (1960) Production of Reducing Gases from Petroleum Products by the Shell Gasification Process. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Teremova, M I and Petrakovskaya, E A and Romanchenko, A S and Tuzikov, F V and Gurevich, Yu L and Tsibina, O V and Yakubailik, E K and Abhilash, (2011) Iron-based ultrafine particles made in mode solutions and industrial waste waters. In: The thrid International Congress on Non-Ferrous Metals, September 7-9, 2011, Hrasnoyarsk, Russia. Tewari, P and Bhatnagar, S S and Nijhawan, B R (1966) Theoretical considerations for substitutions in alloy steels. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Thakur, U P (2002) Emerging Character of Metallic Materials. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Thakur, U P (2001) Toward the Concept of Designing Smart Corrosion Prevention System. In: National Seminar on Corrosion and Its Prevention (NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Thella, John Samuel and Mukherjee, Asim Kumar and Rajshekar, Y (2010) Recovering iron values from iron ore slimes using cationic and anionic collectors. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Tiwari, S N and Sharma, R N and Prakash, S (1995) Fireside Corrosion in Boilers. In: Proceedings of the National Workshop on Boiler Corrosion(NWBC-95), April 11-12, 1995, NML, Jamshedpur. Tomotia, S K (2002) Aluminium and Its Usage. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario(ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Totlani, M and Balachandra, J (1968) Studies in Leaching of Sulphide Concentrates of Copper and Nickel from Indigenous Source. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Trehan, Y N (1968) Diffusion in Evaporated Films of Magnesium-Aluminium. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Trehan, Y N and Bhadra, S P (1961) Recent Advances in the Technology of Aluminium- Magnesium Alloys. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Trehan, Y N and Gupte, P K and Nijhawan, B R (1961) The Effect of Misch Metal Additions on the Structure and Workability of Al-Mg (7-100/.) Alloys. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. Trentini, B and Allard, M (1959) Steelmaking by Injection of Oxygen and Lime Powder Irsid-O .L.P. Process. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Tripathi, Abhishek and Kumar, Manoj and Agrawal, A and Sau, D C and Chakravarty, Sanchita and Mankhand, T R (2011) Leaching of Gold from the Waste Mobile Phone Printed Circuit Boards (PCBS) with Ammonium Thiosulphate. In: 15th International Conference on Nonferrous Metals 2011, 8-9 July 2011, Kolkata,India. Tripathi, Avinash and Agrawal, Ashish and Gupta, V K (2010) Development of a mathematical model for simulation of coal crushing in a Hammer mill. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Tripathy, A K and Koria, S C and Saxena, M N (1973) Preparation of Pre-Reduced Briquettes and Studies on the Kinetics of the Process Under Reduced Pressure. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Tripathy, D A (1999) Ash management plan of CESC Ltd An overview. In: Proceedings of the National Seminar on Fly Ash Utilisation, February 26-27, 1999, NML Jamshedpur, India. Tripathy, Sunil Kumar and Ramamurthy, Y and Sahu, G P and Panda, Lopamudra and Singh, Virendra and Tathavadkar, V (2010) Influence of shaking table process parameters on concentration of chromite plant tailings. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Tripathy, Sunil Kumar and Ramamurthy, Y and Sahu, G P and Tathavadkar, V (2010) Ultra fine chromite concentration using spiral concentrator. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Tsun, Ko (1953) The Overheating & Burning of Steel. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. UUmadevi, T and Rao, S Rakesh and Roy, Pankaj and Mahapatra, P C (2010) Influence of LD slag on iron ore sinter properties and productivity. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. VVaidyanath, L R (1968) The Manufacture of Aluminium Bronze. In: Symposium on Non-ferrous Metals Technology : Paper for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory(CSIR) Jamshedpur. Vaidyanath, L R and Smith, M J (1966) A study of copper consumption in some industrial countries and its relevance to India. In: Symposium on Metallurgy of Substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Vaish, A K and Humane, M M and Deshmukh, M R and Karyakarte, P P (2002) Environmental Management for Sustainable Growth in an Integrated Iron and Steel Plant. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory(CSIR), Jamshedpur. Vaish, A K and Nayak, B and Goswami, M C and Singh, S D and Singh, D P and Gupta, R C (2010) Magnetite ore of nagaland—its mineralogy and reduction kinetics. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Vala, Urvesh (2002) Effect of Lead on Hot Dip Galvanized Steel as Barrier/Sacrificial Coating. In: Proceedings of Seminar on Resurgence of Metallic Materials the Current Scenario (ROMM-2002), 24-25, October 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Vanangamudi, M (1989) Coal Preparation. In: Third Short Term Refresher Course on Classification and Concentration, Dec. 10th - 17th December, 1989, Institute for Miners and Metal Workers Education, balaipanda, Puri. Varma, V N (2001) 100% Solid Polyurethane the Innovative Technology for Corrosion Protection. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Vasudevarao, P V and Vijayavalli, R and Udupa, H V K (1968) Recovery of Certain Non-ferrous Metals from Industrial by Products. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Vasumathi, N and Vijaya Kumar, T V and Rao, D S and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2010) Quality improvement of garnet and quartz by environment friendly natural surfactant. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Vatchagandhy, J S (1958) An Exposition of Alloy Steels for the Engineer. In: Symposium on Production, Properties & Applications of Alloy & Special steels, Feb. 1-4, 1956, NML, Jamshedpur. Venkatesan, S and Sahoo, K C and Barpanda, S (1985) Fines Generation in Kiln Process of Direct Reduction. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Venkateswarlu, K and Ray, Ajoy K and Chaudhury, S K and Pathak, L C (2002) Development of Aluminium based Metal Matrix Composites. In: Proceedings of the Indo-Malaysian Joint Workshop (WAM - 2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur. Venkateswarlu, K and Shetty, K K (1968) Development of Electrical Insulating Surface on Copper-Nickel Alloy Wire used in Naval Instruments. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Venkatraman, B (2011) Advanced NDE and QA for Ensuring Quality and Integrity of Critical Components in Nuclear Industry. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Venugopal, R (2010) Solid waste processing for industrial utilization— a few case studies. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Venugopalan, T and Palit Sagar, S (2011) Need of Improved Non-Destructive Technique for the Surface Condition Monitoring of High Speed Steel (HSS) Work Rolls. In: NDESAI-2011, December 2-3, 2011, Tata Steel, Jamshedpur, India. Verma, B N and Kumar, Sanjay and Joarder, B (2011) Improvement in New Grades of Work Roll for Hot Strip Mill through NDE. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Vidyadhar, A (2007) Role of Mixed Collector Systems in Selective Separation of Albite from Greek Stefania Feldspar Ore. In: International Seminar on Mineral Processing Technology (MPT-2007), February 22-24, 2007, Indian Institute of Technology, Bombay. Vidyadhar, A and Das, Avimanyu and Bhattacharyya, K K and Rao, Hanumantha K (2008) Adsorption Mechanism of Mixed Long-chain Amines and Alcohols on Silicate Minerals. In: 11th International Mineral Processing Symposium, 21-23 October 2008, Belek-Antalya, Turkey. Vidyadhar, A and Das, Avimanyu and Rao, Hanumantha K (2008) Adsorption Mechanism of Longchain Alkylamines on Quartz and Albite. In: International Seminar on Mineral Processing Technology (MPT-2008) , April 22-24, 2008, Trivandrum,INDIA. Vidyadhar, A and Kumari, Neha and Bhagat, R P (2011) Role of Mixed Cationic/Anionic Collector Systems on Hematite Flotation. In: XII International Conference on Mineral Processing Technology (MPT-2011), 20-22 October, 2011, Udaipur, India. Vidyadhar, A and Singh, A K and Srivastava, A and Nayak, B and Rao, K V and Das, Avimanyu (2010) Beneficiation of banded hematite quartzite from meghatuburu mine, eastern India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Vidyadhar, A and Srivastava, A and Singh, R K and Nayak, B and Rao, K V and Das, Avimanyu and Bhattacharyya, K K (2011) Development of Processing Technology for Beneficiation of Lean Iron Ore Fines from GOA. In: XII International Conference on Mineral Processing Technology (MPT-2011), 20-22 October, 2011, Udaipur, India. Vidyadhar, A and Vaishanau, V S and Das, Avimanyu (2009) Optimization of Process Parameters for Flowing Film Concentration of Ground Printed Circuit Boards. In: International Seminar on Mineral Processing Technology (MPT-2009), Oct 28-30, 2009, IMMT, Bhubaneshwar. Vijaya Kumar, T V and Subba Rao, S and Bhaskar Raju, G and Shivakumar, S and Raman, Uma (2010) Development, testing and plant trails of single reagent system for coal flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Vijaya Kumar , T V and Prabhakar, S and Bhaskar Raju, G (2001) Interaction of Oleate Molecules on Sillimanite and Garnet minerals. In: Advances in surface science and engineering, 21-23 February, 2001, Chennai. Vishwamohan, K and Rajgopal, K and Dwivedy, K K and Jayaram, K M V (1985) Beneficiation of Manganese Ore Fines for the Production of Battery Grade MnO2. In: Proceedings of Nationa Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory (CSIR), Jamshedpur. Vishwamohan, K and Shivananda, S R and Dwivedy, K K (1985) Wet High Intensity Magnetic Seperation of some Uranium Ores of India. In: Proceedings of National Seminar on Mineral Processing and IX Annual Technical Convention of Indian Institute of Mineral Engineers, 11th & 12th March 1985, National Metallurgical Laboratory(CSIR) Jamshedpur. Visnyovszky, L (1973) Solid Carbon - The Most Effective Reducing Agent. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, 19-21, Feb. 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Viswanathan, P V and Yadavalli, B V S and Srinivasan, S R and Bhatnagar, P P (1968) Metallurgy of Complex Pb, Cu and Zinc Sulfides. In: Symposium on Non-ferrous Metals Technology : Papers for Presentation, 4th - 7th Dec. 1968, National Metallurgical Laboratory (CSIR), Jamshedpur. WWada, K and Honda, A (1960) Experiments on Blast Furnace Operation in Yawata Iron and Steel Works. In: Symposium on Pilot Plants in Metallurgical Research and Development, 15-18/02/1960, Jamshedpur. Wada, Kamekichi (1959) Recent Trends in Iron and Steel Making in Japan. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Wadia, N J and Prasad, A S (1966) The properties of some substitute bearing alloys. In: Symposium on Metallurgy of substitute Ferrous & Non-Ferrous Alloys, 27-30 April, NML, Jamshedpur. Wallace coffer, L (1968) Extractive Metallurgical Processes Possibly Applicable in India. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Wasnik, D N and Samajdar, I and Kain, V and De, P K and Verlinden, B (2001) Corrosion and Grain Boundry Character Distribution(GBCD)in 316L Austenitic Stainless Steel. In: National Seminar on Corrosion and Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Weldon, B A and Narayan, S. N. Anant (1968) Nickel in Non-ferrous General Engineering Alloys. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. Wenzel, W and Meraikib, M and Speich, P and Franke, F H (1973) Reducing Agents from Brown Coal for the Production of Sponge Iron. In: Symposium on Science and Technology of Sponge Iron and Its Conversion to Steel, Feb. 19-21, 1973, CSIR - National Metallurgical Laboratory, Jamshedpur. Wetter, Martin and Bandopadyay, Ketan (2010) Crushing solutions for rom sizing. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Whiting, A N (1959) Comparative Costs of Iron Pretreatment. In: Symposium on Iron & Steel Industry in India Organised by the NML, Aug.'1959, NML, Jamshedpur. Winterbottom, A B (1953) Cracking of Bucket Lugs in Pelton Turbines a Corrosion Fatigue Phenomenon. In: Symposium on Industrial Failure of Engineering Metals & Alloys, Feb. 5-7, 1953, NML, Jamshedpur. Wood, J (1961) Effect of Composition and Thermal Treatment on the Natural Ageing of Aluminium -Zinc-Copper Alloys. In: Symposium on Light Metal Industry In India, Feb. 14-17, NML, Jamshedpur. YYadav, M and Singh, K and Rastogi , R B and Singh, M M (2001) Substituted Thiobiurets as Corrosion Inhibitors for Mild Steel in L.ON Sulphuric Acid. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Yadav, P N and Kushwaha, S S (2001) Application of Polymer Complexes as Corrosion Inhibitor. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur. Yadav, U S and Das, B K and Kumar, Ashok and Sandhu, H S (2002) Solid Wastes Recyling through Sinter-Status at Tata Steel. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur. Yousef, A A and Boulos, T R and Saada, M Y (1968) Beneficiation of some Egyptian Glass Sands. In: Symposium on Non-ferrous Metals Technology : Papers for presentation, 4th - 7th Dec.1968, National Metallurgical Laboratory (CSIR), Jamshedpur. ZZakharova, N A and Dosymbaeva, Z D and Koiyzhanova, A K and Suleimenov, E N and Beisembaeva, G Zh. (2010) Study of gold and silver leaching processes from sulfide ores. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Zarei Sahamieh, Reza and Pazoki, Amir and Rezaei, Peiman and Saket, Ali (2010) Petrological and geochemical characteristics of the Granitoid complex of astaneh, western Iran, from the point of beneficiation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. Zhou, L and Liu, J and Hao, X J and Strangwood, M and Peyton, A J and Balamurugan, S and Morris, P F and Davis, C L (2011) Quantification of the effect of changes in steel microstructural parameters on EM sensor signals. In: Proceedings of the International Conference on Non Destructive Evaluation for Steel and Allied Industries - NDESAI 2011, Dec. 2-3, 2011, SNTI Auditorium Jamshedpur, India. Ziaja, Dieter and Saraswat, Nikhil and Ognyanova, Albena (2010) Beneficiation of indian iron ore lumps and fines by using underbed air–pulsated BATAC jigs. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India. |
