Items where Subject is "Waste Management"

Article

Abhilash, and VenkatRaman, R and Mehta, K D and Pandey, B D (2011) Isolation and growth kinetic studies of novel isolates from Indian Ocean nodules. Indian Journal of Marine Sciences, 40 (5). pp. 648-652.

Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D (2011) Bioleaching - An Alternate Uranium Ore Processing Technology for India. Energy Proceedia, 7 . pp. 158-162.

Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D and Tamrakar, P K (2010) Column Bioleaching of a Low-Grade Silicate Ore of Uranium. Mineral Processing and Extractive Metallurgy Review, 31 (4). pp. 224-235.

Abhilash, and Pandey, B D (2011) Microbial synthesis of iron-based nanomaterials—A review. Bulletin of Material Science, 34 (2). pp. 191-198.

Abhilash, and Pandey, B D (2011) Role of ferric ions in bioleaching of uranium from low tenor Indian ore. Canadian Metallurgical Quaterly, 50 (2). pp. 102-112.

Abhilash, and Venkat Ramam, R and Mehta, K D and Pandey, B D (2010) Native Marine Isolates from Indian Ocean Nodules. Microbiology Focus, 2.3 . p. 7.

Adhikari, U B and Das, S K and Banerjee, G (1998) Bonding of high fly ash content ceramic bodies at low temperatures. pp. 143-148.

Agate, A D (1973) Survey of Thiobacillus ferroxidans in solubilization of copper sulphide ores. NML Technical Journal, 15 (4). pp. 25-27.

Agrawal, A and Kumari, S and Sahu, K K (2011) Studies on solvent extraction of iron(III) as a step for conversion of a waste effluent to a value added product. Journal of Environmental Management, 92 (12). pp. 3105-3111.

Agrawal, A and Sahoo, K L and Ghosh, Sukomal and Pandey, B D (2002) Recovering Iron from Copper Slag. Foundry Management & Technology, October . pp. 16-21.

Agrawal, A and Sahu, K K and Pandey, B D (2004) A Comparative adsorption study of copper on various industrial solid wastes. AIChE Journal, 50 (10). pp. 2430-2438.

Aman, Noor and Mishra, T and Hait, Jhumki and Jana, R K (2011) Simultaneous photoreductive removal of copper (II) and selenium (IV) under visible light over spherical binary oxide photocatalyst. Journal of Hazardous Materials, 186 (12). pp. 360-366.

Behera, R K and Satapathy, P K and Randhawa, N S and Das, N N (2010) Adsorptive Removal of Phosphate Ions Using Leached Sea Nodule Residue Generated by the Reduction–Roasting Ammoniacal Leaching Process. Adsorption Science & Technology, 28 (7). pp. 611-627.

Bhaskar Raju, G and Latha Priya, D and Latha, Swarna and Parvathy, S and Prabhakar, S (2010) Removal of organics from the waste waters of dyebath by electrooxidation. Asian Journal of Water, Environment and Pollution, 7 (4). pp. 19-23.

Chi, Tran D and Lee, Jae-chun and Pandey, B D and Yoo, Kyoungkeun and Jeong, Jinki (2011) Bioleaching of gold and copper from waste mobile phone PCBs by using a cyanogenic bacterium. Minerals Engineering, 24 . pp. 1219-1222.

Das, Avimanyu and Sarkar, B and Vidyadhar, A and Roy, Subrata (2010) Efficient Recovery of Combustibles From Coking Coal Fines. Mineral Processing and Extractive Metallurgy Review, 31 (4). pp. 236-249.

Dhal, B and Das, N N and Pandey, B D and Thatoi, Hruayanath (2011) Environmental Quality of the Boula-Nuasahi Chromite Mine Area in India. Mine Water and the Environment, 30 (3). pp. 191-196.

Govindaraj, M and Muthkumar, M and Bhaskar Raju, G (2010) Electrochemical oxidation of tannic acid contaminated wastewater by RuO2/IrO2/TaO2-coated titanium and graphite anodes. Environmental Technology, 31 (14). pp. 1613-1622.

Hait, Jhumki and Ranganathan, S and Singh, R J and Premchand, (1997) An investigation on beneficiation of a low-grade nickel ore by magnetic separation after partial reduction. NML Technical Journal, 39 (3). pp. 167-175.

Hoang, L L and Jeong, Jinki and Lee, Jae-chun and Pandey, B D and Yoo, Jae-Min and Trung, H H (2011) Hydrometallurgical Process for Copper Recovery from Waste Printed Circuit Boards (PCBs). Mineral Processing and Extractive Metallurgy Review, 32 (2). pp. 90-104.

Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2012) Review on solvent extraction of cadmium from various solutions. Hydrometallurgy, 111-112 . pp. 1-9.

Jha, Manis K and Kumari, Archana and Choubey, Pankaj K (2010) E-waste recycling: alternative metal resources. Mineral and Metal Review (5). pp. 50-53.

Jha, Manis K and Kumari, Archana and Choubey, Pankaj K and Lee , Jae-chun and Kumar, Vinay and Jeong, Jinki (2012) Leaching of lead from solder material of waste printed circuit boards (PCBs). Hydrometallurgy . (In Press)

Jha, Manis K and Lee, Jae-chun and Kumari, Archana and Choubey, Pankaj K and Kumar, Vinay and Jeong, Jinki (2011) Pressure leaching of metals from waste Printed Circuit Boards using sulphuric acid. Journal of Metals, 63 (8). pp. 29-32.

Jha, Manis K and Upadhyay, R R and Lee, Jae-chun and Kumar, Vinay (2006) Recycling of zinc from textile effluent using ion-exchange process. Proceedings of Fall meetings and 28th conference . pp. 67-71.

Karuppiah, M T and Bhaskar Raju, G (2009) Anodic Degradation of CI Reactive Blue 221 Using Graphite and IrO2/TaO2/RuO2 Coated Titanium Electrodes. Industrial & Engineering Chemistry Research, 48 (4). pp. 2149-2156.

Kim, Eun-young and Kim, Min-seuk and Lee, Jae-chun and Jeong, Jinki and Pandey, B D (2011) Leaching kinetics of copper from waste printed circuit boards by electro-generated chlorine in HCl solution. Hydrometallurgy, 107 (3-4). pp. 124-132.

Kim, Eun-young and Kim, Min-seuk and Lee, Jae-chun and Pandey, B D (2011) Selective recovery of gold from waste mobile phone PCBs by hydrometallurgical process. Journal of Hazardous Materials, 198 . pp. 206-215.

Kumar, Sanjay and Kumar, Rakesh and Alex, T C and Bandopadhyay, A and Mehrotra, S P (2007) Influence of reactivity of fly ash on geopolymerisation. Advances in Applied Ceramics, 106 (3). pp. 120-127.

Kumar, Vinay and Jha, Manis K and Kumar, Manoj and Jeong, Jinki and Lee, Jae-chun (2010) Extraction of copper from sulfate leach solution containing minor metallic constituents in mixer settler unit. EPD Congress (TMS) . pp. 413-420.

Kumar, Vinay and Kumar, Manoj and Bagchi, D and Jha, Manis K and Jeong, Jinki and Lee, Jae-chun (2007) Solvent Extraction Studies for Removal of Hazardous Metals from the Sulfate Leach Solution of Electronic Wastes. Proceedings of International Symposium of resource recycling . pp. 138-143.

Lee, Jae-chun and Kim, Eun-young and Kim, Ji-Hye and Kim, Wonbaek and Kim, Byung-Soo and Pandey, B D (2011) Recycling of WC–Co hardmetal sludge by a new hydrometallurgical route. International Journal of Refractory Metals and Hard Materials, 29 (3). pp. 365-371.

Lee, Jae-chun and Pandey, B D (2012) Bio-processing of solid wastes and secondary resources for metal extraction – A review. Waste Management, 32 . pp. 3-18.

Mannar, J E and Muthukrishnan, V (1964) Symposium on utilisation of metallurgical wastes-A review. NML Technical Journal, 6 (2). pp. 7-12.

Mehta, K D and Pandey, B D and Premchand, (1997) Bio leaching of copper, nickel and cobalt from copper converter slag by Thiobacillus Ferroxidens. NML Technical Journal, 39 (2). pp. 59-70.

Muthukumar, M and Karuppiah, P T and Bhaskar Raju, G (2007) Electrochemical removal of CI Acid orange 10 from aqueous solutions. Separation and Purification Technology, 55 (2). pp. 198-205.

Nguyen, N V and Jeong, Jinki and Jha, Manis K and Lee, Jae-chun and Osseo-Asare, Kwadwo (2010) Comparative studies on the adsorption of Au(III) from waste rinse water of semiconductor industry using various resins. Hydrometallurgy, 105 (1-2). pp. 161-167.

Nguyen, N V and Jeong, Jinki and Shin, Doyun and Kim, Byung-Su and Lee, Jae-chun and Pandey, B D (2012) Simultaneous Recovery of Gold and Iodine from the Waste Rinse Water of the Semiconductor Industry Using Activated Carbon. Materials Transactions, 53 (4). pp. 760-765.

Nguyen, N V and Lee, Jae-chun and Kim, Soo-kyoung and Jha, Manis K and Chung, Kang-Sup and Jeong, Jinki (2010) Adsorption of gold(III) from waste rinse water of semiconductor manufacturing industries using Amberlite XAD-7HP resin. Gold Bulletin, 43 (3). pp. 200-208.

Nijhawan, B R (1964) Research and development work on the utilisation of metallurgical wastes at the National Metallurgical Laboratory. NML Technical Journal, 6 (1). pp. 50-59.

Puvvada, G V K and Srikanth, S (1999) Recycling of tungsten based heavy alloy scrap. NML Technical Journal, 40 (1). pp. 21-29.

Rayalu, S and Premchand, and Shalini, and Ramachandrarao, P (1997) Characterisation of wastes from processing of sea nodules. NML Technical Journal, 39 (2). pp. 71-76.

Rohatgi, P K and Bowander, B (1972) Potential use of technological forecasting in planning materials research. NML Technical Journal, 14 (4). pp. 141-146.

Saha, A K and Kumar, A and Akerkar, D D and Shahani, M J (1971) Utilization of indigenous steel scrap for iron powder production-A study of dissolution rates of scrap in hydrocholoric acid. NML Technical Journal, 13 (4). pp. 93-99.

Saha, A K and Misra, R N and Bhatnagar, P P (1970) Studies on leaching of bulk Ni-Cu-Mo sulphides. NML Technical Journal, 12 (3). pp. 69-73.

Sahu, K K and Agrawal, A (2008) Environmental friendly recycling of electronic waste – A challenge before developing nations. Journal of Metallurgy and Materials Science, 50 (2). pp. 107-118.

Sahu, K K and Alex, T C and Mishra, D and Agrawal, A (2006) An overview on the production of pigment grade titania from titania-rich slag. Waste Management & Research, 24 (1). pp. 74-79.

Sastry, P R and Bhandary, V S and Gupte, P K and Nijhawan, B R (1967) Shell moulding with indigenous raw materials. NML Technical Journal, 9 (1). pp. 29-34.

Satapathy, P K and Randhawa, N S and Das, N N (2011) Oxidative decolorization of methylene blue by leached sea-nodule residues generated by the reductionroasting ammoniacal leaching process. Environmental Technology . pp. 1-8.

Singh, S D and Biswas, D K and Mishra, K K and Ramachandrarao, P (1999) Eco-friendly cokeless-cupola. NML Technical Journal, 40 (1). pp. 1-12.

Som, P K and Roychowdhury, S K (1982) Recovery of metal values from industrial wastes. NML Technical Journal, 24 (1-2). pp. 8-11.

Tran, Chi Dac and Lee, Jae-chun and Pandey, B D and Jeong, Jinki and Yoo, Kyoungkeun and Huyunh, Trung Hai (2011) Bacterial Cyanide Generation in Presence of Metal Ions (Na+, Mg2+, Fe2+, Pb2+) and Gold Bioleaching from Waste PCBs. Journal of Chemical Engineering of Japan, 44 (10). pp. 692-700.

Vijayalakshmi, P and Bhaskar Raju, G and Gnanamani, A (2011) Advanced Oxidation and Electrooxidation As Tertiary Treatment Techniques to Improve the Purity of Tannery Wastewater. Industrial & Engineering Chemistry Research, 50 (17). pp. 10194-10200.

Vinh, H H and Lee, Jae-chun and Jeong, Jinki and Huyunh, Trung Hai and Jha, Manis K (2010) Thiosulfate leaching of gold from waste mobile phones. Journal of Hazardous Materials, 178 (1-3). pp. 1115-1119.

Book or NML Publication

Director, NML (2010) NML Diamond Jubilee Souvenir. In: NML Diamond Jubilee Souvenir. National Metallurgy Laboratory, Jamshedpur.

Kumar et al, Rakesh (2011) UNSPECIFIED In: Frontiers in Mechanochemistry and Mechanical Alloying. CSIR-National Metallurgy Laboratory, Jamshedpur, pp. 1-334. ISBN 97881- 87053-69-8

Pradhan, J and Das, S N and Thakur, R S (1998) Use of activated Red Mud for removal of Phosphate and Selenite from Aqueous Solutions. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 155-162. ISBN 81-87053-28-7

Pradhan, J and Das, S N and Thakur, R S (1998) Use of activated Red Mud for Removal of Phosphate and Selenite from Aqueous Solutions. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 155-162. ISBN 81-87053-28-7

Rafiuddin, S and Prasad, S (1997) Utilisation of waste from Jhamarkotra phosphate beneficiation plant, RSMML, Udaipur, Rajasthan. In: Processing of fines: Proceedings of the national seminar, Jan 9-10, 1997. NML, Jamshedpur, pp. 279-284. ISBN 81-87053-25-9

Ray, A C (1998) Sustainable technology through pollution prevention programme. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 87-91. ISBN 81-87053-28-7

Sengupta, B and Kumar, A and Hashim, M A and Ramakanth, C (1998) Nickel and chromium in wastewater - The Malaysian experience. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 27-51. ISBN 81-87053-28-7

Sharma, Manoj Kumar (1998) Initiatives in Environment Management undertaken by the Small Industries Development Bank of India. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 163-166. ISBN 81-87053-28-7

Singh, Ratnakar and Maulik, S C and Rafiuddin, S and Kunwar, R K and Banerjee, B and Sil, S K (1996) Recovery of values from mining and industrial wastes. In: Environmental & waste management in metallurgical industries. NML, Jamshedpur, pp. 75-85.

Sinha, S N and Agrawal, M K and Saha, R K (1998) Pollution and its Control in Copper Industry. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 185-196. ISBN 81-87053-28-7

Subramanian, C and Suri, A K (1998) Recovery of Niobium and Tantalum from Low Grade Tin Slag - A Hydrometallurgical Approach. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 100-107. ISBN 81-87053-28-7

Subramanian, S and Lahiri, A K (1998) Process Engineering for Pollution Control and Waste Minimisation in Non -Ferrous Metallurgical Industries. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 17-26. ISBN 81-87053-28-7

Tripathy, P K and Shah, V D and Rakhasia, R H and Sehra, J C (1998) Environmental considerations in the selection of metallurgical processes for the extraction of molybdenum from low grade molybdenite concentrate. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 92-99. ISBN 81-87053-28-7

Vaish, A K and Singh, S D and Bhattacharya, A P and Ghosh, S B and Singh, O and Basak, A C and Maharaj, Lal and Ramachandrarao, P (1996) Utilisation of waste battery scrap. In: Environmental & waste management in metallurgical industries. NML, Jamshedpur, pp. 177-182.

Vaish, A K and Singh, S D and Ghosh, S B and Singh, O and Bhattacharyya, A P and Maharaj, L and Ramachandrarao, P (1998) A Comprehensive pollution control system for the mitigation of fine particulates of lead and Sox gases from secondary lead smelters. In: Environmental & waste management: in non-ferrous metallurgical industries. NML, Jamshedpur, pp. 225-229. ISBN 0971-9407

Viswanathan, M (1998) Integrated Pollution Control and Waste Management in Copper Base Processing Industries. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 67-78. ISBN 81-87053-28-7

Viswanathan, P V and Gangadharan, T K (1996) Environmental and waste management in iron and steel industry. In: Environmental & waste management in metallurgical industries. NML, Jamshedpur, pp. 199-207.

Viswanathan, P V and Sankaran, C (1998) An Overview of environmental issues and protection measures in Indian non-ferrous plants. In: Environmental & waste management: in non-ferrous metallurgical industries. NML, Jamshedpur, pp. 197-208. ISBN 0971-9407

Viswanathan, P V and Srinivasan, R and Mishra, K K (1996) Waste management perspective in non-ferrous industries. In: Environmental & waste management in metallurgical industries. NML, Jamshedpur, pp. 208-214.

Conference or Workshop Item

Abhilash, and Prakash, Mayuri and Pandey , B D (2011) Microbial Composite in Trivalent Chromium Remediation from Effluents. In: IIIrd International Congress on Nonferrous Metals, 7-9th Sept 2011, Krasnoyarsk,Russia.

Abhilash, and Singh, Nivedita and Mehta, K D and Pandey, B D (2011) Kaolinte Based Microbial Composite in Cr(III) sorption from waste waters. In: National Seminar on Environmental Waste Management in Metallurgical Industries, 15-16th March 2010, ITBHU,Varanasi.

Abhilash, and Mehta, K D and Pandey, B D (2011) Biomineral Processing of Zinc Tailings and Synthesis of Value Added Nanomaterials. In: XIIth Int. Conf. on Mineral Processing Technology (MPT-2011), 20-22nd October 2011, Udaipur.

Achimovičová, M and Baláž, P and Rečnik, A and Kováč, J and Rečnik, A and Kováč, J and Feldhoff, A and Gock, E (2011) Mechanochemical synthesis of nanocrystalline lead selenide. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Ali, Malek and Basu, Projjal (2011) Synthesis of nanostructured titanium carbide from titanium oxide and Ferro-titanium through mechanical activation. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Anand Ram, S and Abhilash, and Mehta, K D and Pandey, B D and Mankhand, T R (2008) Bioleaching of a low grade Indian Chalcopyrite ore by Microbial consortium. In: CTWMI 2008, 13-16 April 2008, Santiago,Chile.

Asnani, C K and Ramachandran, K and Sarma, G V S N and Kulkarni, A P (2002) Ultrasonic Cleaning and Re-use of HEPA Filters in Nuclear Fuel Manufacturing Facility. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25, January, 2002, CSIR - National Metallurgical Laboratory, Jamshedpur.

Baláž, Peter and Dutková, Erika (2011) Applied mechanochemistry of solids (a review). In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Bandopadhyay, A and Singh, K K (1997) Control of pollution created by suspended particulate matters (SPM) from small and medium scale iron and steel and refractory industries: the dry and wet options. In: UNSPECIFIED.

Barik, Anil (2010) Effective management of coke oven solid waste and by-products in steel plant. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Besterci, Michal and Sülleiová, Katarína and Velgosová, Oksana (2011) Mechanical alloying of Al-C system. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Bhatnagar, Deepak and Jancy, A (1998) Cobalt recovery from Metallurgical Wastes of Zinc Industry. In: UNSPECIFIED.

Bhattacharyya, P and Chattoraj, U S and Saha, P and Sarkhel, B R and Chakrabarti, D M (1998) Salvaging the values from the rejects of a by-product recovery plant. In: UNSPECIFIED.

Bhattacharyya, P and Sarkhel, B R and Chakrabarti, D M and Saha, P and Ghosh, S R and Chattoraj, U S (1996) Gravity separation at variable 'g' for management of mineral wastes and pollution. In: UNSPECIFIED.

Bhattacharyya, P and Singh, R and Sil, S K and Sengupta, S K and Saha, P and Srivastava, J P and Maulik, S C (2002) Reduction of Environment Pollution in Processing of Barite. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Biswas, Somjeet and Singh , Satyaveer D and Suwas, Satyam (2011) Microstructure and texture evolution of Pure magnesium during ecae. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Brahma, P and Dutta, S (2011) Novel transport properties of nanostructured α-Fe2O3. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chaira, D and Mishra, B K and Sangal, S (2011) Synthesis and characterization of nanocrystalline carbides By reaction milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chandwani, H K and Vishwanathan, V and Mahadevan, H (1998) Environmental Issues to be Addressed in Indian Alumina Refineries and their Possible Solutions. In: UNSPECIFIED.

Chatterjee, Anjan K (2011) Enhancing the potential of industrial use of the Indian fly ashes through echano-chemical activation – prospects and problems. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chaubey, A K and Mishra, B K and Mukhopadhyay, N K and Mukherjee, P S (2011) Effect of compact density and preheating temperature of the Al-Ti-C Preform on the fabrication of in-situ Mg–TiC composites. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chauhan, Sandeep Kumar and Soni, P R (2011) Development of 2024 p/m aluminium alloy–SiCp nanocomposites via mechanical alloying. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Csőke, B and Mucsi, G and Sík, Cs (2011) Production and practical application of mechanically activated fly ash-based binding material. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Das, S K and Kumar, Sanjay and Singh, K K and Ramachandrarao, P (1996) An Innovative approach towards utilisation of wastes generated from iron & steel industries. In: UNSPECIFIED.

Das, S N and Thakur, R S and Ray, H S (1998) Red Mud Pollution Problems : Some observations. In: UNSPECIFIED.

Deshpande, K G (1998) Use of spent Potlining from the Aluminium Electrolytic cell as an additive to Arc Furnace Steel Melting and Cupola iron Melting in Steel industries. In: UNSPECIFIED.

Dhal, B and Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D (2010) Bio-processing for metal extraction, recycling and effluent treatment- an overview. In: International Conference on Non-ferrous Metals 2010, 10-11th Aug 2010, Varanasi.

Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2010) Kinetic aspects of Cr(VI) bioremediation of water and soil contaminated from chromite mine overburden dumps. In: XI International Seminar on Mineral Processing Technology (MPT-2010), 15-17th Dec. 2010, NML Jamshedpur.

Director, NML (1964) Abstracts of papers - Symposium on utilisation of metallurgical wastes. In: Symposium on utilisation of metallurgical wastes, March 10, 1964, Jamshedpur.

Fabián, Martin and Baláž, Peter and Briančin, Jaroslav (2011) Study of the silver ions cementation after mechanical activation of cementator. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Floyd, John (1998) Pollution Control in the Non-Ferrous Industries - An Indian Perspective of Worldwide Importance. In: UNSPECIFIED.

Foct, Jacques (2011) Specifics of mechanically driven atomic distributions In interstitial alloys. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Frias, C and Raychaudhuri, A and Palma, J and Diaz, G (2002) Development of New-Concept Clean Technologies to Extract Metals from Primary and Secondary Sources. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Gazder, Azdiar A and Florian, H Dalla Torre and Christopher, H J Davies and Pereloma, Elena V (2011) The microstructure, texture and mechanical properties of AS-ECAE Interstitial-free steel and copper. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Ghorai, Tanmay K and Pramanik, Panchanan (2011) Mechanochemical synthesis, characterization and photocatalytic Properties of M2O3/TiO2 (M = Fe, Mn) nano-composite under visible light. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Ghosh, M and Kar, A and Kumar, K and Kailas, S V and Das, S K and Ray, Ajoy K (2011) Evaluation of interface microstructure for friction stir welded aluminium-stainless steel plate. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Ghosh, N K and Parthasarathy, L (2002) Atmospheric Pollution Control in Coke Ovens. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Goel, Malti (1998) Reduction of Greenhouse Gas Pollution in Non-Ferrous Metal industry : Indian Perspective. In: UNSPECIFIED.

Gorai, Bipra and Jana, R K and Premchand, (2002) Reduction of Emission from Aluminium Industries and Cleaner Technology. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Grosdidier, T and Ji, G and Llorca, N (2011) On the processing of dense hetero-nanostructured metallic materials for improved strength / ductility balance by ecae and sps methods. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, CSIR-NML, Jamshedpur.

Gupta, S K and Tandon, J K and Ghorai, D N and Pal, P K and Sarkar, P K (2002) Transforming Steel Domain Green through Innovative Waste Management - A Jindal Approach. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Gurevich , B I and Kalinkin, A M and Kalinkina, E V and Kalinnikov, V T (2011) Utilization of ferrous-magnesium slag for production of binding materials. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Hussain , Zuhailawati and Yusoff, Mahani (2011) In-situ formation of NbC in mechanically alloyed Cu-Nb-C At different temperatures. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Jana, R K and Gorai, Bipra and Premchand, (1998) Processing of dust materials from Indian copper plants. In: UNSPECIFIED.

Jha, Manis K and Choubey, Pankaj K and Kumari, Archana and Kumar, Rakesh and Kumar, Vinay and Lee, Jae-chun (2011) Leaching of lead from solder material used in electrical and electronic equipment. In: Proceedings of second symposium on Recycling of waste II, 2011, Recycling of waste II.

Jha, Manis K and Kumar, Abhishek and Kumar, Vinay and Lee, Jae-chun (2011) Prospective scenario of e-waste recycling in India. In: Proceeding of Second Symposium On Recycling of Electronic Waste II, 2011, Recycling of waste II.

Jha, Manis K and Kumar, Vinay and Bagchi, D and Singh, R J and Lee, Jae-chun (2006) Recycling of rayon industry effluent for the recovery and separation of Zn/Ca using Thiophosphinic extractant. In: Proceeding of spring meeting and 27th conference, May, 2006, KIGAM.

Jha, Manis K and Kumar, Vinay and Lee, Jae-chun (2007) Processing of electroplating effluent for the recovery of zinc and chromium using ion exchange technique. In: Proceedings of International Symposium of resource recycling, 2007, resource recycling.

Jha, Manis K and Shivendra, and Kumar, Vinay and Pandey, B D and Kumar, Rakesh and Lee, Jae-chun (2010) Leaching studies for the recovery of metals from the waste printed circuit boards (PCBs). In: Proceedings of TMS-2010, Feb 2010.

Kale, B B and Kulkarni, S S and Gokarn, A N (1998) Conversion of Natural Resources through Waste reduction at the Processing Step by Briquetting Technique. In: UNSPECIFIED.

Kalinkin, A K (2011) Mechanosorption of Co2 by silicates: mechanism, kinetics and possible applications. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kalinnikov, V T and Krasheninnikov, O N and Belogurova, T P (2011) Mining waste utilization in the production of building materials. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kaloshkin, S D and Ergin, K S and Tcherdyntsev, V V and Maksimkin, A V and Petrzhik, M I and Antipov, E M and Gerasin, V A (2011) Structure and propertties of ball milled utrahigh-molecular weight Polyethylene - clay composite. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kaloshkina, Sergey and Romankov, Sergey and Komarov, Sergey and Kaevitser, Ekaterina (2011) Intermetallic coatings produced by mechanical alloying method. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Ketegenov, T and Urakaev, F (2011) Influence of thickness of coated layer on parameters and kinetics of mechanical activation (example of quartz processing). In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Konstanchuk, I and Gerasimov, K and Bobet, J -L (2011) Mechanically alloyed magnesium-based materials For hydrogen storage. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kosenko, N and Vinogradova, L and Filatova, N and Smirnova, M (2011) The mechanical treatment as a method of Inorganic substances passive. In: International Conference on Mechanochemistry and Mechanical Alloying, Dec 1-4, 2008, CSIR-NML, Jamshedpur.

Kulikova, M P and Kaminskii, Yu D (2011) Influence of mechanical activation on alkylation and extractability of coal. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kumar, Abhishek and Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2010) Solvent extraction: a potential tool for the separation of metals from leach liquor of electronic scraps. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kumar, Rakesh and Kumar, Sanjay and Alex, T C and Srikanth, S and Mehrotra, S P (2010) Process innovations using mechanical activation of minerals and wastes. In: UNSPECIFIED.

Kumar, Rakesh and Kumar, Sanjay and Mehrotra, S P (2011) Mechanical activation in blended cement processing. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kumar, Rakesh and Srivastava, J P and Premchand, (1998) Utilization of iron values of red mud for metallurgical applications. In: UNSPECIFIED.

Kumar, Sanjay and Das, U S and Singh, K K and Ramachandrarao, P (1998) Development of ceramic floor and wall tiles from fly ash. In: UNSPECIFIED.

Kumar, Sanjay and Kumar, Rakesh and Bandopadhyay, A and Mehrotra, S P (2007) Novel geopolymeric building materials through synergistic utilisation of industrial waste. In: International conference alkali activated materials: research, production and utilization, 2007, Prague.

Kumar, Sanjay and Kumar, Rakesh and Mehrotra, S P (2011) Geopolymers, fly ash reactivity and mechanical activation. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kumar, Sanjay and Singh, K K and Das, S K and Ramachandrarao, P (2002) Waste Utilisation : Towards Cleaner Environment. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Kumar , Rakesh and Bandopadhyay, Amitava (2002) Clean Technologies in Nonferrous Metals Recycling. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Kumari, Archana and Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2010) Recovery of lead from the solder of waste printed circuit boards. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kundu, D K and Barman, R K (2002) Coke Oven Emission Standards - A Comparative Assessment. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Lahiri, A K and Aggarwal, Kajal (2002) Clean Technology : Limit and Limitation. In: Clean Technologies for Metallurgical Industries (EWM - 2002), 24-25 January, 2002, CSIR - National Metallurgical Laboratory, Jamshedpur.

Linol, Julie and Martinetto, Pauline and Anne, Michel and Coquerel, Gérard (2011) On the existence of a dynamic critical point by using wet milling on (±) modafinil. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Mehta, K D and Kumar, Rakesh and Pandey, B D and Mehrotra, S P (2011) Bio-dissolution of metals from activated nodules of Indian Ocean. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Meshram, Pratima and Sahu, S K and Sinha, Manish K and Khan, Pritam and Pandey, B D and Mankhand, T R (2010) Solvothermal synthesis of high value copper powder from Copper bleed solution. In: NMD - ATM 2010, 14-16th November 2010, National Science Seminar Complex, Indian Institute of Science, Bangalore.

Mishra, Debabrata and Perumal, A and Srinivasan, A (2011) Composition dependent properties of mechanically alloyed amorphous Fe-Zr-B powders. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Misra, V N (2002) Development of Waste Management Culture. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Mondal, B N and Basumallick, A and Chattopadhyay, P P (2011) The magnetic behavior of Cu-Ni-Co-Fe quaternary alloys prepared by Mechanical alloying. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Mukherjee, T K and Patra, R N (1998) Status of Waste Treatment in Titanium Mineral Industries. In: UNSPECIFIED.

Mukhopadhyay, N K (2011) Synthesis of nanocrystalline and amorphous phases in complex metallic alloys during mechanical milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Mulas, G and Delogu, F (2011) Estimation of mechanochemical effects in heterogeneous processes. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Padmanabhan, K A and Prabu, S Balasivanandha (2011) Ultrafine grained materials through mechanical processing: An assessment. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Palaniandy, Samayamutthirian and Azizli, Khairun Azizi Mohd and Hussin, Hashim and Hashim, Syed Fuad Saiyid (2011) Changes in the structure of talc by continuous jet milling in relation to imposed specific kinetic energy. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Parbat, R N (1998) Environmental and Waste management in Non-ferrous Metallurgical Industries - Critical issues. In: UNSPECIFIED.

Patra, P and Nagaraju, D R and Somasundaran, P (2011) Impact of pulp rheology on selective recovery of value minerals from ores. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Ramachandrarao, P (2002) Sustainable Development : Mining and Metals Sectors. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Rao, P V T and Sripriya, R and Mohanty, O N (2002) March Towards Green Steel Production-Efforts at Tata Steel. In: Clean Technologies for Metallurgical Industries (EWM - 2002), 24-25 January, 2002, CSIR - National Metallurgical Laboratory, Jamshedpur.

Ray, H S (2002) Some Barriers to Clean Technologies. In: Clean Technologies for Metallurgical Industries - (EWM - 2002), 24-25, January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay and Mankhand, T R (2010) A comparative performance of two resins based on polysterene for removal of chromium(III) from tannery solution. In: Environmental Management in Metallurgical Industries, March 15-16, 2010, Banars Hindu University, Varanasi.

Samal, S and Chaira, D and Chaira, B (2011) Production and stability of al and cu ultrafine particles in nanofluids. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Sarangi, B M and Kesav, Babu and Sheshadri, M K (2002) Environmental Control Measures in Sponge Iron Industry with Particualr Reference to Tata Sponge Iron Limited. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Sasikumar, C and Srikanth, S and Kumar, Rakesh and Alex, T C and Mehrotra, S P (2011) Where does the energy go in high energy milling? In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Senapati, Bimalananda and Kumar, C Satish and Banerjee, Tonmoy (2011) Water management at Vedanta aluminium Ltd., Lanjigarh refinery. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Shakhtshneider, T P and Myz, S A and Mikhailenko, M A and Dyakonova, M A and Boldyrev, V V (2011) Mechanochemistry and solubilization of drugs. In: International Conference on Mechanochemistry and Mechanical Alloying, 1-4 December 2008, CSIR-NML, Jamshedpur.

Sharma, R P and Basu, G S and Prasad, S B and Dhillon, A S (2002) Steel Industry and Climate Change. In: Clean Technologies for Metallurgical Industries (EWM)-2002, 24-25, January, 2002, CSIR- National Metallurgical Laboratory, Jamshedpur.

Singh, K K and Mankhand, T R and Sinha, S N (2010) High temperature treatment of waste printed circuit boards to recover valuable metals. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2010) Extractive separation and recovery of hydrochloric acid and iron values from spent pickle liquor. In: XI International Seminar on Mineral Processing Technology (MPT-2010), 15 - 17 December, 2010, NML, Jamshedpur.

Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2009) Recovery of acid and iron values from the spent pickle liquor by solvent extraction. In: NMD - ATM 2009, November 14, 2009 to November 17, 2009, Science City Complex,Kolkata, India.

Sinha, S N and Agrawal, M K and Prasad, R B and Singh, K K (2002) Proper Management of Metallurgical Wastes - A Paramount Necessity for clean Environment. In: Clean Technologies for Metallurgical Industries - (EWM - 2002), 24-25, January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Surkov, G and Golovko, A K and Lomovsky, O I and Lobanov, J S (2011) Mechanochemical conversion of acetylene in quartz – ultrafine metal powder system. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Tcherdyntsev, V V and Kaloshkin, S D and Sudarchikov, V A and Dorofeev, A A and Mochkina, I V and Yuryeva, N V and Danilov, V D (2011) Ball milling effect on the properties of ultra high molecular weight Polyethylene - bronze composite. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Tcherdyntsev, V V and Shevchukov, A P and Sviridova, T A and Kaloshkin, S D (2011) Phase transformations in mechanically alloyed Al-Cu-Cr powders. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Tcherdyntsev, V V and Titova, V Yu and Kaloshkin, S D and Baldokhin, Yu V and Zagainov, A V and Rodin, A O (2011) Structure and magnetic properties of mechanically alloyed Fe3-xAlCrx powders. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Teremova, M I and Petrakovskaya, E A and Romanchenko, A S and Tuzikov, F V and Gurevich, Yu L and Tsibina, O V and Yakubailik, E K and Abhilash, (2011) Iron-based ultrafine particles made in mode solutions and industrial waste waters. In: The thrid International Congress on Non-Ferrous Metals, September 7-9, 2011, Hrasnoyarsk, Russia.

Thirugnanam, A and Chakravarthi, N. Veera and Chakkingal, Uday and Kumar, T S Sampath (2011) Novel titanium - hydroxyapatite biocomposites By mechanical milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME2008), 1-4 December, 2008, CSIR-NML, Jamshedpur.

Turianicová, Erika and Baláž, Peter (2011) A possible way to storage carbon dioxide on mechanically activated olivine (Mg,Fe)2SiO4. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Venugopal, R (2010) Solid waste processing for industrial utilization— a few case studies. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Welham, N J and Setoudeh, N (2011) Increasing gas sorption onto carbon by milling with alumina. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Yadav, T P and Mukhopadhyay, N K and Tiwari, R S and Srivastava, O N (2011) Mechanically induced phase transformation in Al-Cu- Fe-Cr decagonal Quasicrystalline alloy by high-energy ball milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Yadav, U S and Das, B K and Kumar, Ashok and Sandhu, H S (2002) Solid Wastes Recyling through Sinter-Status at Tata Steel. In: Clean Technologies for Metallurgical Industries (EWM-2002), 24-25 January, 2002, National Metallurgical Laboratory (CSIR), Jamshedpur.

Yariv, S and Lapides, I and Abramova, E (2011) Mechanochemical reactions of clay minerals with CsCl. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Šepelák, V and Bergmann, I and Indris, S and Heitjans, P and Becker, K D (2011) Crystallite size dependent cation distribution in nanostructured spinels studied by nmr, mössbauer spectroscopy and XPS. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Other

Director, NML (2011) Director's Desk - 60th RC Meeting of CSIR-NML. CSIR-National Metallurgy Laboratory, Jamshedpur.

Patent

Jha Manis K (2012) A process for the recovery of cobalt from discarded batteries of mobile phone. PAT-0395/2012(2)/IN.

Jha Manis K (2012) A process for the recovery of neodymium as a value added product from waste hard disk of personal computers. PAT-0396/2012(3)/IN.

Park Kyung-Ho, Nam Chul-Woo, Mishra Devabrata (2010) Leaching method of valuable metals from synthetic matte. 10-0999194/01.12.2010.

Project Reports

Abhilash, (2009) Biosorption of Cr(III) using native fungal species isolated from tannery effluents. Training Report (TR). NML, Jamshedpur.

Abhilash, (2009) Extraction of chitosan from bioresources and its application in biosorption. Training Report (TR). NML, Jamshedpur.

Abhilash, (2011) Isolation and purification of bacteria from bauxite and iron ore mine samples. Training Report (TR). NML, Jamshedpur.

Abhilash, (2008) Isolation of native microbial species from soil and mine water of Uranium mines and their screening. Training Report (TR). NML, Jamshedpur.

Abhilash, (2009) Microbial Isolation Studies and its Implication in Biosorption of Chromium. Training Report (TR). NML, NML, Jamshedpur.

Abhilash, (2011) Optimisation of parameters for biosorption of trivalent chromium from model tannery effluent using penicillium species. Training Report (TR). NML, Jamshedpur. (Submitted)

Abhilash, (2010) Optimization of parameters for Biosorption of Cr(III) by Aspergillus niger. Training Report (TR). NML, Jamshedpur.

Abhilash, (2009) Studies on adaptive tolerance of aspergillus niger and penicillium species on hexavalent chromium and its applications in biosorption. Training Report (TR). NML, Jamshedpur. (Submitted)

Abhilash, (2011) Studies on isolation of micro-organisms from soil sample and their tolerance with metal ions. Training Report (TR). NML, Jamshedpur. (Submitted)

Video

Abhilash, and Mehta, K D and Pandey, B D (2006) Video on Operational COlumn Bioleaching of Uranium at 100kg scale at UCIL premises. [Video]