Items where Division is "Material Science and Technology" and Year is 2019

A

Abhilash, and Meshram, Pratima and Sinha, S and Pandey, B D and Kumari, V K and Kar, S (2019) Chloride leaching of lanthanum and cerium from Indian red mud and metal separation studies. Metallurgical Research & Technology, 116(2) (IF-0.641).

Adeleke, A A and Odusote, J K and Lasode, O A and Ajani, O Lasode and Ikubanni, P P and Malathi, M and Paswan, Dayanand (2019) Mild pyrolytic treatment of Gmelina arborea for optimum energetic yields. Cogent Engineering, 6(1) . 1593073-1-13.

Adeleke, A A and Odusote, J K and Lasode, O A and Ikubanni, P.P. and Malathi, M and Paswan, D (2019) Densification of coal fines and mildly torrefied biomass into composite fuel using different organic binders. Heliyon, 5(7) (Cite Score-1.66).

Adhikary, M and Chakraborty, A and Das, A and Venugopalan, T and Kumar, B R (2019) Influence of annealing texture on dynamic tensile deformation characteristics of Dual phase steel (vol 736, pg 209, 2018). Materials Science and Engineering: A, 756 (IF-4.081). p. 312.

Akhtar, M and Khajuria, A (2019) Probing true creep-hardening interaction in weld simulated heat affected zone of P91 steels. Journal of Manufacturing Processes, 46 (IF-3.462). pp. 345-356.

Akhtar, M and Khajuria, A (2019) Probing True Microstructure‑Hardening Relationship in Simulated Heat Affected Zone of P91B Steels. Metallography, Microstructure, and Analysis . pp. 656-677.

Akhtar, M and Khajuria, A and Kumar, V S and Gupta, R K and Albert, S K (2019) Evolution of Microstructure during Welding Simulation of Boron Modified P91 Steel. The Physics of Metals and Metallography, 120(7) (IF-1.169). pp. 672-685.

B

Bagui, S and Murugesan, A P and Poddar, Palash (2019) Creep Behavior of As-Cast Mg-10 wt.%Sn and Mg-10 wt.%Sn-3 wt.%Al-1 wt.%Zn Alloys: A Comparative Study. Journal of Materials and Performance, 28(12) . pp. 7616-7628.

Bandyopadhyay , N R (2019) Efficiency enhancement of crystalline silicon solar cells by coating with luminescent silicon nanostructures. Journal of Metallurgy and Materials Science, 61(3) . pp. 135-141.

Bansal, G K and Pradeep, M and Ghosh, C and Rajnikanth, V and Srivastava, V C and Bhagat, A N and Kundu, S (2019) Evolution of Microstructure in a Low-Si Micro-alloyed Steel Processed Through One-Step Quenching and Partitioning. Metallurgical and Materials Transactions A , 50(2) (IF-1.985). pp. 547-555.

Bansal, G K and Srivastava, V C and Ghosh Chowdhury, S (2019) Role of solute Nb in altering phase transformations during continuous cooling of a low-carbon steel. Materials Science and Engineering: A, 767 (IF-4.081). p. 138416.

Barat, K and Das, Goutam and Bharathy, S and Ghosh, M (2019) Compositional Optimization of a Commercially Produced Ferritic Steel Using Microstructural Heterogeneity and Mechanical Properties. Materials Performance & Characterization .

Barat, K and Sivaprasad, S and Kar, S K and Tarafder, S (2019) Low‐cycle fatigue of IN 718: Effect of waveform. Fatigue & Fracture Of Engineering Materials And Structures . pp. 1-10.

Bhattacharya, Ankita and Karmakar, Anish and Karani, Arnab and Ghosh, M and Chakraborty, D (2019) Processing of Ultrafine-Grained Steels by Warm Rolling and Annealing. Journal of Materials Engineering and Performance, 28(2) (IF-1.476). pp. 753-768.

Bhattacharya, P and Lee, J H and Kar, K K and Park, H S (2019) Carambola-shaped SnO2 wrapped in carbon nanotube network for high volumetric capacity and improved rate and cycle stability of lithium ion battery. Chemical Engineering Journal, 369 (IF-8.355). pp. 422-431.

C

Chakladar, S and Mohanty, Ashok and Mandal, S and Chakravarty, S (2019) Structural evaluation of coking component of West Bokaro coal of Indian origin. Journal International Journal of Coal Preparation and Utilization (IF-2.020). pp. 1-14.

Chakravarty, K and Mishra, V and Chakravarty, S and Chakladar, S and Saxena, V K and Bhattacharya, S (2019) Mineralogical Study of Beneficiated and Carbonized Indian Coking Coal for Better Utilization: A Case Study. Natural Resources Research (IF-2.000). pp. 1-20.

Chalavadi, G and Singh, R (2019) Theoretical aspects of conceptual multi-property mineral separator. Separation Science and Technology, 54(18) (IF-1.354). pp. 3154-3163.

Chandan, A K and Bansal, G K and Kundu, J and Chakraborty, J and Ghosh Chowdhury, S (2019) Effect of prior austenite grain size on the evolution of microstructure and mechanical properties of an intercritically annealed medium manganese steel. Materials Science and Engineering: A , 768 (IF-4.081). p. 138458.

Chandan, A K and Mishra, G and Mahato, B and Ghosh Chowdhury, S and Kundu, S and Chakraborty, J (2019) Stacking Fault Energy of Austenite Phase in Medium Manganese Steel. Metallurgical and Materials Transactions A , 50(10) (IF-1.985). pp. 4851-4866.

Chandan, A K and Tripathy, S and Ghosh, M and Ghosh Chowdhury, S (2019) Evolution of Substructure of a Non-equiatomic FeMnCrCo High Entropy Alloy Deformed at Ambient Temperature. Metallurgical and Materials Transactions A, 50(11) (IF-1.985). pp. 5079-5090.

Churyukanovaa, Margarita and Kaloshkin, S and Shuvaeva, E and Mitra, A and Panda, A K and Roy , R K and Murugaiyan, Premkumar and Corte-Leon, P and Zhukova, V and Zhukov, A (2019) The effect of heat treatment on magnetic and thermal properties of Finemet-type ribbons and microwires. Journal of Magnetism and Magnetic Materials, 492 (IF-2.683). p. 165598.

D

Darji , S B and Zala , D M and Rajput, U P and Rao, V J and Vaish, A K (2019) Typical self-healing materials-their mechanism and emerging applications. Journal of Metallurgy and Materials Science, 61(3) . pp. 151-160.

Darshit, R S and Bhavsar, S N (2019) Effect of Tool Nose Radius and Machining Parameters on Cutting Force, Cutting Temperature and Surface Roughness-An Experimental Study of Ti-6Al-4V (ELI). Journal of Metallurgy and Materials Science, 61(1) . pp. 25-37.

Das, A and Tarafder, S and Sivaprasad, S and Chakrabarti, D (2019) Influence of microstructure and strain rate on the strain partitioning behaviour of dual phase steels. Materials Science and Engineering A, 754 . pp. 348-360.

Das , B and Hossain, S M and Pramanick, A K and Dey, A and Ray, M (2019) One-Pot Synthesis of Gel Glass Embedded with Luminescent Silicon Nanoparticles. ACS Applied Materials & Interfaces, 11(2) . pp. 2507-2515.

Deepa , A and Gopinathan , C and Pandi , P (2019) Investigation on oxide multilayer thin fines solar cells. Journal of Metallurgy and Materials Science, 61(2) . pp. 73-81.

Dey, R and Das, A and Tarafder, S and Sivaprasad, S (2019) State of Grain Boundary Misorientation Due to Multiaxiality in Austenitic Stainless Steel. Metallurgical and Materials Transactions A , 50(5) (IF-1.985). pp. 47-51.

Dey, R and Tarafder, S and Sivaprasad, S (2019) Influence of proportional and non-proportional loading on deformation behaviour of austenitic stainless steel-macro and micro analysis. Theoretical and Applied Fracture Mechanics, 100 . pp. 342-353.

Dey, S and Roy, R K and Mallick, A B and Mitra, A and Panda, A K (2019) High-temperature magnetocaloric effect in devitrified Fe/Co based glassy monolayer and bilayer ribbons. Journal of Materials Science, 54(16) . pp. 11292-11303.

Dhivya, E and Magadevan, D and Palguna, Y and Mishra, T and Aman, Noor (2019) Synthesis of titanium based hetero MOF photocatalyst for reduction of Cr (VI) from wastewater. Journal of Environmental Chemical Engineering, 7(4) . p. 103240.

Director, NML (2019) CSIR-NML Technology Handbook 2019. In: CSIR-NML Technology Handbook 2019. CSIR-NML, Jamshedpur, Jamshedpur, 01-68.

Dixit, P and Makhija, D and Mukherjee, A K and Singh, V and Bhatanagar, A and Rath, R K (2019) Characterization and Beneficiation of Dry Iron Ore Processing Plant Reject Fines to Produce Sinter/Pellet Grade Iron Ore Concentrate. Mining Metallurgy & Exploration, 36(2) . pp. 451-462.

Dutta, S and Rajnikanth, V and Panda, A K and Mitra, A and Chatterjee, S and Roy, R K (2019) Effect of Annealing Treatment on Mechanical and Magnetic Softening Behaviors of Cold Rolled Interstitial-Free Steel. Journal of Materials Engineering and Performance , 28(4) . pp. 2228-2236.

G

Ghosh, Arpita and Sahu, M and Singh, P K and Kumar, S and Ghosh, M and Palit Sagar, S (2019) Assessment of Mechanical Properties for Dissimilar Metal Welds: A Non-destructive Approach. Journal of Materials Engineering and Performance, 28(2) (IF-1.476). pp. 900-907.

Ghosh, Rachit and Gupta, S K and Kumar, A and Kumar, S (2019) Durability and Mechanical Behavior of Fly Ash-GGBFS Geopolymer Concrete Utilizing Bottom Ash as Fine Aggregate. Journal Transactions of the Indian Ceramic Society, 78(1) . pp. 24-33.

Grahvardhan, G and Singh, J and Kumar, S and Patel, V K and Gangil, B (2019) Study of mechanical and abrasive wear behavior of glass fibre reinforced epoxy-talc/mustard cake hybrid compositions. Journal of Metallurgy and Materials Science, 61(1) . pp. 11-23.

H

Hirabayi , S S and Prakrathi , S (2019) Impact and wear resistance of Al-7072 MMCs reinforced with SiC and Al2 O3. Journal of Metallurgy and Materials Science, 61(3) . pp. 143-149.

Hore, S and Das, S K (2019) Computer simulation of microstructure evolution in strip-cast silicon steel with cube and fibre texture. Philosophical Magazine (IF-1.855). pp. 2841-2857.

Hore, S and Das, Suchandan K and Humane, M M and Peethala, A K (2019) Neural Network Modelling to Characterize Steel Continuous Casting Process Parameters and Prediction of Casting Defects. Transactions of the Indian Institute of Metals (IF-1.176). pp. 3015-3025.

K

Kamaraj, A and Mandal, G K and Roy, G G (2019) Control of Slag Carryover from the BOF Vessel During Tapping: BOF Cold Model Studies. Metallurgical and Materials Transactions B , 50(1) . pp. 438-458.

Katiyar, P K and Randhawa, N S (2019) Corrosion behavior of WC-Co tool bits in simulated (concrete, soil, and mine) solutions with and without chloride additions. International Journal of Refractory Metals and Hard Materials, 85 . p. 105062.

Khajuria, A and Kumar, Rajneesh and Bedi, R (2019) Effect of Boron Addition on Creep Strain during Impression Creep of P91 Steel. Journal of Materials Engineering and Performance , 28(7) . pp. 4128-4142.

Kumar, A and Arora, K S and Gupta, R K and Harmain, G A (2019) Investigation on interface morphology and joint configuration of dissimilar sheet thickness FSSW of marine grade Al alloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(9) . pp. 1-13.

Kumar, G and Kumar, Ashok and Bar, H N and Sivaprasad, S (2019) A comparative assessment of cyclic deformation behavior of SA333 Gr-6 steel at ambient and elevated temperatures. International Journals of Material Research, 110(11) . pp. 1000-1009.

Kumar, Rakesh and Kumar, Sanjay and Alex, T C and Singla, Rashmi (2019) Mapping of calorimetric response for the geopolymerisation of mechanically activated fly ash. Journal of Thermal Analysis and Calorimetry, 136(3) . pp. 1117-1133.

Kumar, Sunil and Pattanayek, S K (2019) Effect of Multiaxial Tensile Deformation on the Mechanical Properties of Semiflexible Polymeric Samples. The Journal of Physical Chemistry B, 123(43) . pp. 9238-9249.

Kumar, Sunil and Pattanayek, S K (2019) Force induced removal of an encapsulated semi-flexible polymer from single walled carbon nanotube. The Journal of Chemical Physics, 516 . pp. 22-27.

Kumar, Sunil and Pattanayek, S K and Das, S K (2019) Reactivity-Controlled Aggregation of Graphene Nanoflakes in Aluminum Matrix: Atomistic Molecular Dynamics Simulation. Journal of Physics Chemistry C, 123(29) . pp. 18017-18027.

Kumari, Archana and Jha, Manis K and Pathak, D D and Chakravarty, S and Lee, Jae-chun (2019) Processes developed for the separation of europium (Eu) from various resources. Separation and Purification Reviews, 48(2) . pp. 91-121.

Kumari, Archana and Jha, Manis K and Yoo, Kyoungkeun and Panda, Rekha and Lee, J Y and Kumar, J Rajesh and Pathak, D D (2019) Advanced process to dephosphorize monazite for effective leaching of rare earth metals (REMs). Hydrometallurgy, 187 . pp. 203-211.

Kumari, Archana and Panda, Rekha and Lee, J Y and Thriveni, Thenepalli and Jha, Manis K and Pathak, D D (2019) Extraction of rare earth metals (REMs) from chloride medium by organo-metallic complexation using D2EHPA. Separation and Purification Technology, 227 .

Kumari, Archana and Parween, R and Chakravarty, S and Parmar, Kavita and Pathak, D D and Lee, Jae-chun and Jha, Manis K (2019) Novel approach to recover rare earth metals (REMs) from Indian coal bottom ash. Hydrometallurgy, 187 . pp. 1-7.

M

Magadevan, D and Dhivya, E and Mundari, N D A and Mishra, T and Aman, Noor (2019) Development of novel TiO2-Cu2(OH)PO4 heterojunction as nanophotocatalyst for improved Cr (VI) reduction. Journal of Environmental Chemical Engineering, 7(2) . p. 102968.

Mahato, P and Mishra, Suman K (2019) A prolonged exposure of Ti-Si-B-C nanocomposite coating in 3.5 wt% NaCl solution: Electrochemical and morphological analysis. Surface and Coatings Technology, 375 . pp. 477-488.

Makhija, Dilip and Rath, R K and Mukherjee, A K (2019) Application of enhanced gravity technique for separation of iron phase from LD slag. Metallurgical Research & Technology, 116(3) .

Mandal, D and Murmu, Laxmi and Choudhury, C and Singh, Gaurav and Sahoo, K L (2019) Influence of alloying elements and grain refiner on microstructure, mechanical and wear properties of Mg-Al-Zn alloys. Canadian Metallurgical Quarterly, 58(2) . pp. 241-251.

Mandal, G K and Kamaraj, A and Minj, M.M. and Das, S K and Ramanan, R B V and Venugopalan, T (2019) Development of Speciality Grade Wire by Controlling the Inclusions in High-Carbon Steel Using Synthetic Slag Treatment. Transactions of the Indian Institute of Metals, 72(2) . pp. 369-381.

Mandal, S and Kailath, A J (2019) Enhanced Plasticity of Cu-Zr-Ti Bulk Metallic Glass and Its Correlation with Fragility. Metallurgical and Materials Transactions A , 50(1) . pp. 199-208.

Mandal, Soumen and Sivakumar, B and Singhbabu, Y N and Bandyopadhyay, N R and Chattopadhyay, P P and Kailath, A J (2019) Electrochemical Behavior of Cu 60 Zr 25 Ti 15 Bulk Metallic Glass with the Addition of Nb and Mo. Journal of Materials Engineering and Performance, 28 (IF-1.476). pp. 6874-6884.

Meshram, Pratima and Pandey, B D and Abhilash, (2019) Advanced Review on Extraction of Nickel from Primary and Secondary Sources. Journal Mineral Processing and Extractive Metallurgy Review , 40(3) . pp. 157-193.

Metya, Avijit Kumar and Das, Anindya and Tarafder, S and Balasubramaniam, Krishnan (2019) Nonlinear Lamb wave for the evaluation of creep damage in modified 9Cr–1Mo steel. NDT & E International, 107 .

Metya, Avijit Kumar and Tarafder, Soumitra and Balasubramaniam, Krishnan (2019) Characterization of Tempering Behaviour of Modified 9Cr-1Mo Steel by Ultrasonic Lamb wave Mixing. Materialstoday :Proceedings, 11(Part 2) . pp. 695-699.

Mohanasundaram, M and Roy, G G and Prakash, S (2019) Thermodynamic Modelling for Design of Synthetic Slag for Inclusion Removal. Transactions of the Indian Institute of Metals , 72(4) . pp. 1111-1118.

Mohanty, Ashok and Chakladar, S and Mallick, S and Chakravarty, S (2019) Structural characterization of coking component of an Indian coking coal. Fuel, 249 . pp. 411-417.

Mukherjee, S and Barat, K and Sivaprasad, S and Tarafder, S and Kar, S K (2019) Elevated temperature low cycle fatigue behaviour of Haynes 282 and its correlation with microstructure – Effect of ageing conditions. Materials Science and Engineering: A, 762 . p. 138073.

Munda, Parikshit and Husain, M M and Soni, M K and Kumar, P and Rajnikanth, V (2019) Metallurgical Investigation of the Collapsed Front Structure of a Dragline in a Coal Mine. Journal of Failure Analysis and Prevention , 19(1) . pp. 161-176.

Murugaiyan, Premkumar and Mitra, A and Panda, A K and Kumar, A S and Roy, R K and Manna, K and Srivastava, S K (2019) Electromagnetic interference shielding effectiveness of amorphous and nanocomposite soft magnetic ribbons. Physica B: Condensed Matter, 568 . pp. 13-17.

Murugaiyan, Premkumar and Mitra, A and Patro, A K and Roy, R K and Churyukanovaa, Margarita and Kaloshkin, S and Shuvaeva, E and Panda, A K (2019) Role of P on amorphization, microstructure, thermo-physical and soft magnetic properties of Fe-rich FeB(P)SiNbCu melt-spun alloys. Journal of Magnetism and Magnetic Materials, 492 .

N

Nath, S K and Kumar, Sanjay (2019) Influence of Granulated Silico-Manganese Slag on Compressive Strength and Microstructure of Ambient Cured Alkali-Activated Fly Ash Binder. Waste and Biomass Valorization 10, Issue 7, pp 2045–2055, 10(7) (Waste and Biomass Valorization ). pp. 2045-2055.

Nath, S K and Kumar, Sanjay (2019) Reaction kinetics of fly ash geopolymerization: Role of particle size controlled by using ball mill. Advanced Powder Technology, 30(5) . pp. 1079-1088.

Nath, S K and Kumar, Sanjay (2019) Role of alkali concentration on reaction kinetics of fly ash geopolymerization. Journal of Non- Crystalline Solids, 505 . pp. 241-251.

O

Odusote, J K and Adeleke, A A and Lasode, O A and Malathi, M and Paswan, Dayanand (2019) Thermal and compositional properties of treated Tectona grandis. Biomass Conversion and Biorefinery, 9(3) . pp. 511-519.

P

Pal, C K and Sahu, Ranjan K and Singh, R K and Jena, A K (2019) Magnetically recyclable palladium nanoparticles (Fe3O4-Pd) for oxidative coupling between amides and olefins at room temperature. Applied Organometallic Chemistry, 33(8) .

Patel, N K and Walunj, M G and Kumar, B Ravi (2019) Importance of Martensite Spatial Distribution at Large Volume Fractions in Imparting Ductility in High-Strength Dual-Phase Steel. Journal of Materials Engineering and Performance, 28(3) . pp. 1391-1401.

Paul, S K and Roy, S and Sivaprasad, S and Tarafder, S (2019) Forming Limit Diagram Generation from In-Plane Uniaxial and Notch Tensile Test with Local Strain Measurement through Digital Image Correlation. Physical Mesomechanics , 22(4) . pp. 340-344.

Poddar, D and Chakraborty, A and Kumar, B Ravi (2019) Annealing twin evolution in the grain-growth stagnant austenitic stainless steel microstructure. Materials Characterization, 155 .

Poddar, Palash and Murugesan, A P (2019) Calculation of internal back stress of different gravity-die cast Mg-alloys during creep deformation. Journal of Metallurgy and Materials Science, 61(2) . pp. 61-72.

Pradhan, Ratikanta and Karmakar, Anish and Ghosh, M and Chakrabarti, Debalay and Mukherjee, S (2019) Effect of thermomechanical processing on microstructural evolution in precipitation strengthened ferrite steel. SN Applied science .

Prasad, Sanjay and Maity, S K and Kumari, Aarti and Randhawa, N S and Shekher, M C (2019) Preparation of zinc powder from zinc dross. Journal of Metallurgy and Materials Science, 61(3) . pp. 119-123.

R

Rai, R K and Sahu, J K (2019) Mean-stress and oxidation effects on fatigue behaviour of CM 247 DS LC alloy. Materials Science and Technology, 35(10) . pp. 1220-1226.

Rai, R K and Sahu, J K and Pramanick, A K and Paulose, N and Fernando, D.C and Das, S K (2019) Creep deformation micro-mechanisms of CM 247 DS LC Ni-base superalloy under relevant service condition. Materials Characterization, 150 . pp. 155-165.

Raj, R and Kumari, Aarti and Sahu, D K and Prasad, R and Ranganathan, S (2019) Carbothermic Reduction of Iron Oxide Waste Generated During the Processing of Ilmenite. Transactions of the Indian Institute of Metals , 72(1) . pp. 11-16.

Rajinikanth, V and Kumar, Tipu and Mahato, B and Ghosh Chowdhury, S and Sangal, S (2019) Effect of Strain-Induced Precipitation on the Austenite Non-recrystallization (T-nr) Behavior of a High Niobium Microalloyed Steel. Metallurgical and Materials Transactions A, 50(12) . pp. 5816-5838.

Rajnikanth, V and Soni, K and Mahato, B and Rao, M Ananda (2019) Study of microstructural degradation of a failed pinion gear at a cement plant. Engineering failure Analysis, 95 . pp. 117-126.

Rajput, U P and Zala ., D M and Darji , S B and Rao , V J and Vaish, Ashok Kumar (2019) Recent advancements in hydrophobic materials and their significant applications in corrosion prevention. Journal of Metallurgy and Materials Science, 61(3) . pp. 125-133.

Rana, A K and Paul, S K and Dey, P P (2019) Stress field in an isotropic elastic solid containing a circular hard or soft inclusion under uniaxial tensile stress. Materials Today:Proceeding, 11(Part-2) . pp. 657-666.

Randhawa, N S and Prasad, Sanjay (2019) Direct Carbothermic Reduction of Weathered Ilmenite for Efficient Removal of Iron by Leaching. Metallurgical and Materials Transactions B, 50(3) . pp. 1277-1289.

Ravikiran, K and Das, G and Kumar, S and Sivaprasad, K and Ghosh, M (2019) Evaluation of Microstructure at Interfaces of Welded Joint Between Low Alloy Steel and Stainless Steel. Metallurgical and Materials Transactions A (50(6)). pp. 2784-2797.

Ravikiran, K and Das, Goutam and Kumar, Suranjit and Singh, PK and Sivaprasad, K and Ghosh, M (2019) Narrow gap welding of low alloy and austenitic stainless steels using different Inconel alloys: comparison of microstructure and properties. Materials Research Express, 6(9) (IF-1.449).

Roy, Amritendu and Ghosh, M and Gourkar, H and De, PS (2019) Microstructure, indentation and first principles study of AlCuFeMn alloy. Materialia .

Roy, R K and Murugaiyan, Premkumar and Panda, A K and Mitra, A (2019) Compositional optimization of high induction (> 1.7T) FeCo-based nanocomposite alloys with enhancement of thermo-physical and magnetic properties. Physica B: Condensed Matter , 566 . pp. 71-76.

Rudresh, M and Maruthi, B H (2019) Mechanical assisted modification of halloysite nano clay: expoxy composites. Journal of Metallurgy and Materials Science, 61(2) . pp. 83-93.

S

Saha, D and Chatterjee, D and Chakravarty, S and Roychowdhury, T (2019) Investigation of Environmental-Concern Trace Elements in Coal and Their Combustion Residues from Thermal Power Plants in Eastern India. Natural Resources Research, 28(4) . pp. 1505-1520.

Sahoo, Biraj K and Tripathy, S and Ghosh, M and Das, Swapan K and Das, Goutam (2019) Investigation of Premature Failure of a Coal-Fired Boiler Superheater Tube. Journal of Failure Analysis and Prevention, 19(3) . pp. 792-801.

Sahoo, M and Bhowmik, Tishrota and Mishra, V and Pal, S and Sharma, Mamta and Chakravarty, S (2019) Significance of coal quality on thermoplastic properties: a case study. International Journal of Coal Preparation and Utilization .

Sahu, M K and Dutta, Chandan and Ghosh, Arpita and Palit Sagar, S (2019) A Digital Image Processing Tool for Size and Number Density Distribution of Precipitates in Creep-Exposed Material. Soft Computing for Problem Solving . pp. 653-659.

Sahu, Nilimadhaba and Biswas, A and Kapure, Gajanan and Randhawa, N S (2019) Thermochemical analysis of smelting of ferruginous manganese ore for silicomanganese production. Calphad, 66 (IF-2.652). p. 101637.

Sarkar, C and Chowdhuri, A R and Garai, S and Chakraborty, J and Sahu, Sumant Kumar (2019) Three-dimensional cellulose-hydroxyapatite nanocomposite enriched with dexamethasone loaded metal-organic framework: a local drug delivery system for bone tissue engineering. Cellulose, 26(12) (IF-4.210). pp. 7253-7269.

Sarkar, C and Sahu, Sumant Kumar and Sinha, Arvind and Chakraborty, J and Garai, Subhadra (2019) Facile synthesis of carbon fiber reinforced polymer-hydroxyapatite ternary composite: A mechanically strong bioactive bone graft. Materials Science and Engineering: C , 97 . pp. 388-396.

Senthil, P P and Rao, K S and Nandi, H K and Singh, V and Kumar, S and Sankaran, S and Kumar, K S and Madhu, V (2019) Influence of niobium microalloying on the microstructure and mechanical properties of high carbon nano bainitic steel. Procedia Structural Integrity , 14 . pp. 729-737.

Shah, Minal and Das, S K and Ghosh Chowdhury, S (2019) Effect of Alloying Elements on Microstructure and Mechanical Properties of Air-Cooled Bainitic Steel. Metallurgical and Materials Transactions A, 50(5) . pp. 2092-2102.

Shaik, Saida and Chakravarty, S and Mishra, P R and Sahu, Rina and Chakravortty, K (2019) Caking Ability Tests for Coal Blends in Process to Utilize the Indian Origin Coals. Transactions of the Indian Institute of Metals, 72(12) (IF-1.176). pp. 3129-3137.

Sharma, R and Kumar, Sanjeev and Saha, R (2019) A comprehensive survey on selective laser sintering: An additive manufacturing technique. Journal of Metallurgy and Materials Science, 61(1) . pp. 51-60.

Sindhura, D and Venkata, S M and Murthy, G V S (2019) Comprehensive Microstructural Evaluation of Precipitation in Inconel 718. Metallography, Microstructure, and Analysis, 8(2) . pp. 233-240.

Singh, Charu and Tiwari, S K and Singh, R (2019) Effect of carbonate and phosphate conversion pretreatments and optimization on corrosion behaviour of subsequent electroless nickel coating on AZ91 alloy. Applied Surface Science, 483 . pp. 334-354.

Singh, Charu and Tiwari, S K and Singh, R (2019) Exploring environment friendly nickel electrodeposition on AZ91 magnesium alloy: Effect of prior surface treatments and temperature of the bath on corrosion behaviour. Corrosion Science, 151 . pp. 1-19.

Singh, G and Nanda, T and Miadad, S J and Gorain, N C and Venugopalan, T and Kumar, B R (2019) Correlation between Luders band formation and precipitation kinetics behaviour during the industrial processing of interstitial free high strength steels. Archives of Civil and Mechanical Engineering, 19(2) . pp. 469-483.

Singh, M and Kumar, R and Shukla, D K and Arora, K S (2019) Phase transformation and impact toughness in HAZ of micro alloyed X80 line pipe steel. Materials Research Express, Volume 6, Number 2, 6(2) .

Singh, M P and Arora, K S and Shajan, N and Pandu, S R and Shome, M and Kumar, R and Shukla, D (2019) Comparative analysis of continuous cooling transformation behaviour in CGHAZ of API X-80 and X-65 line pipe steels. Journal of Thermal Analysis and Calorimetry, 137(4) . pp. 1155-1167.

Singh, N and Nanda, T and Kumar, B R and Das, S K and Singh, V (2019) In situ investigations of microstructural changes during tensile deformation of AISI 304L stainless steels. Archives of Civil and Mechanical Engineering, 19(3) . pp. 672-679.

Singh, R K and Sahu, J K (2019) Influence of hold type and duration on cyclic deformation behaviour of IN740H. Materials Science and Technology, 35(4) . pp. 488-499.

Singh, R K and Sahu, J K (2019) Yield strength anomaly and dynamic strain ageing behaviour of recently developed advanced ultra-supercritical boiler grade wrought Ni-based superalloy IN 740H. Materials at High Temperatures, 36(3) . pp. 220-231.

Singh, R K and Sahu, K K and Chalavadi, G and Singh, Ratnakar and Padmanabhan, N P H (2019) Separation characteristics of centrifugal fluidized separator using binary density system. Mineral Processing and Extractive Metallurgy Review . pp. 1-8.

Singh, Rajesh Kumar and Singh, B K and Noor, Alam (2019) Formation of composite layer by nanocoating of organic and filler of inorganic compounds on mild steel to control in chloride ions environment. Journal of Metallurgy and Materials Science, 61(2) . pp. 109-118.

Singla, Rashmi and Tripathy, S and Das, S K (2019) An integrated phenomenological process model for prediction of oxygen pickup during open air tapping and pouring of liquid steel. Chemical Engineering Science, 203 . pp. 391-401.

Sinha, P and Chakravarty, S and Singh, R and Singh, P K and Murthy, G V S (2019) Magnetization study of the sensitization in SS304LN. Materials Research Bulletin, 109 . pp. 149-154.

Soni, and Mishra, Suman K and Sharma, S K (2019) Influence of nitrogen partial pressure on optical properties of magnetron sputtered Al-Si-N thin films. Thin Solid Films, 682 . pp. 1-9.

Suresh, N and Selvapandiyan, M and Arumugam, J and Sudhakar, S (2019) Crystal growth, structural, optical, magnetic and thermal properties of pure and thiourea doped L-alanine single crystals for nonlinear optical applications. Journal of Metallurgy and Materials Science, 61(1) . pp. 1-9.

V

Vaish, Ashok Kumar (2019) Spectrum of engineering materials for sustainable development. Journal of Metallurgy and Material Science, 61(1) . pp. 39-50.

Verma, B and Mishra, Suman K (2019) Spectral and structural investigation of layered growth of copper and graphene deposited by sputtering and annealing. Applied Physics A: Materials Science & Processing, 125(8) .

Verma, D and Banerjee, D and Mishra, Suman K (2019) Effect of Silicon Content on the Microstructure and Mechanical Properties of Ti-Si-B-C Nanocomposite Hard Coatings. Metallurgical and Materials Transactions A , 50(2) . pp. 894-904.

Y

Yadav, B S and Sahu, Ranjan K and Pramanick, A K and Mishra, T and Alam, A and Bharti, M and Mukherjee, S and Kumar, S and Nayar, S (2019) Collagen functionalized graphene sheets decorated with in situ synthesized nano hydroxyapatite electrospun into fibers. Materials Today Communications, 18 . pp. 167-175.

Z

Zala, D M and Rajput, U P and Darji, S B and Rao, V J and Vaish, A K (2019) Graphene-recent advancements in its extraction, its comparative study with other materials and emerging applications. Journal of Metallurgy and Materials Science, 61(2) . pp. 95-108.