Items where Division is "Material Science and Technology" and Year is 2014

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 117.

Ahmad, Khalil and Ali, Muhammad and Ibrahim , Ather and Baig, Waqas Mehmood (2014) Optimising the yield of silicon carbide synthesised from indigenous biomass husk using different catalysts. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 23-27.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2014) Mechanically induced reactivity of gibbsite: Part 1. Planetary milling. Powder Technology, 264 (IF-2.269). pp. 105-113.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2014) Mechanically induced reactivity of gibbsite: Part 2. Attrition milling. Powder Technology, 264 (IF-2.269). pp. 229-235.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2014) Towards ambient pressure leaching of boehmite through mechanical activation. Hydrometallurgy, 144 (IF-2.224). pp. 99-106.

Ali, F and Scudino, S and Anwar, M S and Shahid, R N and Srivastava, V C and Uhlenwinkel, V and Stoica, M and Vaughan, G and Eckert, J (2014) Al-based metal matrix composites reinforced with Al-Cu-Fe quasicrystalline particles: Strengthening by interfacial reaction. Journal of Alloys and Compounds, 607 (IF-2.407). pp. 274-279.

Ali, Tayyab and Venkataraman, A (2014) Synthesis and characterization of polyaniline coated functionalized g-Fe O nanoparticles. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 35-39.

Balusamy, T and Venkateswarlu, M and Murthy, K S N and Vijayanand, S and Sankara Narayanan, T S N (2014) Effect of Surface Mechanical Attrition Treatment (SMAT) on the Surface and Electrochemical Characteristics of Pb-Sn Alloy. International Journal of Electrochemical Science, 9(1) (IF-1.956). pp. 96-108.

Barat, K and Bar, H N and Mandal, D and Roy, H and Sivaprasad, S and Tarafder, S (2014) Low temperature tensile deformation and acoustic emission signal characteristics of AISI 304LN stainless steel. Materials Science and Engineering A, 597 (IF-2.409). pp. 37-47.

Barat, Kaustav and Metya, Avijit Kumar and Sathpathy, S and Sivaprasad, S and Tarafder, S and Kar, Sujoy Kumar (2014) Ultrasonic quantification of high temperature cyclic damage in an advanced nickel based superalloy. Materials Science and Engineering A, 625 (IF-2.409). pp. 194-204.

Barman, H and Hamada, A S and Sahu, T and Mahato, B and Talonen, J and Shee, S K and Sahu, Puspendu and Porter, D A and Karjalainen, L P (2014) A Stacking Fault Energy Perspective into the Uniaxial Tensile Deformation Behavior and Microstructure of a Cr-Mn Austenitic Steel. Metallurgical and Materials Transaction A, 45A(4) (IF-1.730). pp. 1937-1952.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2014) Microstructural characteristics and mechanical properties of carbon nanotube reinforced aluminum alloy composites produced by ball milling. Materials & Design, 64 (IF-3.171). pp. 542-549.

Basavaraja, C and Kumar, K B Satish and Vishnuvardhan, T K (2014) Hony comb patterns and DC conductivity of cellulose multiwalled carbon nanotube composite films. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 209-215.

Bhagat, R P and Nayak, B and Bhattacharyya, K K and Goswami, M C (2014) Mineralogy of iron ore pellet and its correlation with crushing strength. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 117-123.

Chakrabarti, Kaushik and Sarkar, B and Ashok, V D and Das, K and Chaudhuri, S S and Mitra, A and De, S K (2014) Exchange bias effect in BiFeO3-NiO nanocomposite. Journal of Applied Physics, 115(1) (IF-2.185). 013906.

Chakraborty, J (2014) Diffraction stress analysis of fiber textured Ti thin films undergoing hcp - fcc phase transformation. International Confrence on Residual Stresses 9 (ICRS 9), 768-769 . pp. 257-263.

Chakraborty, J and Maiti, Tias and Ghosh, M and Das, Goutam and Chandra, Sanjay (2014) Cementite dissolution in cold drawn pearlitic steel wires: role of dislocations. International Confrence on Residual Stresses 9 (ICRS9), 768-769 . pp. 304-312.

Chatterjee, Partho Pratim (2014) Embryonic improvements of solar photovoltaics. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 67-72.

Cherian, Antony (2014) A non-invasive technique for compositional analysis of coal. Masters thesis, NIT Trichy.

Cherian, Antony (2014) A Non-Invasive Technique for Compositional Analysis of Coal. Masters thesis, NIT Trichy.

Choudhary, B N and Roy, B N and Vaish, A K and Singh, S D (2014) Smelting of sponge iron fines for the production of steel grade iron. Journal of Metallurgy and Materials Science, 15(2) (NON-SCI). pp. 107-116.

Chowdhury, A and Bijalwan, P K and Sahu, Ranjan K (2014) Investigations on the role of alkali to obtain modulated defect concentrations for Cu2O thin films. Applied Surface Science, 289 (IF-2.538). pp. 430-436.

Chowdhury, T (2014) Deformation and Fracture Behaviour of 20MnMoNi55 Pressure Vessel Steel. PhD thesis, Indian Institute of Engineering, Science and Technology, Shibpur (formerly Bengal Engineering and Science University, Shibpur).

Das, Arpan (2014) Magnetic properties of cyclically deformed austenite. Journal of Magnetism and Magnetic Materials, 361 (IF-2.002). pp. 232-242.

Das, Arpan (2014) Slip System Activity During Cyclic Plasticity. Metallurgical and Materials Transactions A, 45 A (7) (IF-1.730). pp. 2927-2930.

Das, Arpan and Chowdhury, T and Tarafder, S (2014) Ductile fracture micro-mechanisms of high strength low alloy steels. Materials & Design, 54 (IF-3.171). pp. 1002-1009.

Das, Arpan and Roy, Nilima and Ray, Ashok K (2014) Stress induced creep cavity. Materials Science and Engineering A, 598 (IF-2.409). pp. 28-33.

Das, C R and Albert, S K and Laha, K and Swaminathan, J and Ravi, S and Bhaduri, A K and Murty, B S and Mayer, P (2014) Influence of Coincidence Site Lattice Boundary on Creep Resistance of P91 Steel Weldments. Procedia Engineering, 86 (NIF-0.629). pp. 80-87.

Das, Swapan K and Munda, Parikshit and Ghosh Chowdhury, S and Das, Goutam and Singh, Raghuvir (2014) Effect of microstructures on corrosion and erosion of an alloy steel gear pump. Engineering Failure Analysis, 40 (IF-1.130). pp. 89-96.

Das, T K and Mandal, S K and Panda, A K and Bhattacharya, S and Banerji, Pallab and Mitra, A (2014) Giant Magnetoimpedance (GMI) Effect and Field Sensitivity of Ferrofluid Coated Co66Fe2Si13B15Cr4 Soft Magnetic Amorphous Microwire. Physics Procedia, 54 (NIF-0.629). pp. 16-22.

Das, T K and Mitra, A and Mandal, S K and Roy, Rajat K and Banerji, Pallab and Panda, A K (2014) Parametric controls on giant magnetoimpedance (GMI) behaviour of CoFeSiBCr amorphous wires for prospective sensor applications. Sensors and Actuators A-Physical , 220 (IF-1.841). pp. 382-387.

Das, T K and Mitra, A and Roy, Rajat K and Panda, A K and Mandal, S K (2014) Development of GMI Based Sensing Device for Identification of Magnetic Phases in Steel. In: All India Seminar on Instrumentation and Process Control, April 24 - 25, 2014, Jamshedpur.

Das, T K and Panda, A K and Mitra, A and Banerji, Pallab and Mandal, S K (2014) Rapidly solidified CoFeSiBCr amorphous wire : From manipulation to giant magnetoimpedance sensor applications. 195 Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 195-202.

Das, T K and Panda, A K and Mitra, A and Roy, Rajat K and Mandal, S K (2014) Giant Magnetoimpedance Sensor for Structural Integrity Assessment of Engineering Components. In: National Seminar and Exhibition on Non-Destructive Evaluation, NDE 2014, December 3 - 5, 2014, Pune.

De, J and Bhattacharjee, S and Dhar, S and Acharyya, S K and Gupta, S K and Tarafder, S (2014) Finite Element Simulation of Multi-Axial Low Cycle Fatigue of Material SA333. Procedia Engineering, 86 (NIF-0.629). pp. 158-165.

De, Subhabrata and Bhattacharya, J (2014) Dependence of bioremediation performance of acid mine drainage on substrate characteristics. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 203-207.

Deole, G S and Tambavekar, A S and Baviskar, V R and Sable, S R and Chitale, M M and Nimbalkar, V M (2014) Development of novel Al-alloy (Al-5Mg)/10Wt.%TiB 2 metal matrix composites by in-situ reaction synthesis. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 179-186.

Deole, G S and Tambavekar, A S and Baviskar, V R and Sable, S R and Chitale, M M and Nimbalkar, V M (2014) Wear behavior of Al-Alloy (Al-5Mg) in-situ reinforced TiB particulate. 217 Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 217-222.

Divya, M and Das, C R and Albert, S K and Goyal, Sunil and Ganesh, P and Kaul, R and Swaminathan, J and Murty, B S and Kukreja, L M and Bhaduri, A K (2014) Influence of welding process on Type IV cracking behavior of P91 steel. Materials Science and Engineering A, 613 (IF-2.409). pp. 148-158.

Dutta, Samik and Barat, K and Das, Arpan and Das, Swapan K and Shukla, A K and Roy, Himadri (2014) Characterization of micrographs and fractographs of Cu-strengthened HSLA steel using image texture analysis. Measurement, 47 (IF-1.526). pp. 130-144.

Esfahani, Hamid Reza and Mirsalehi, Seyyed Ehsan (2014) Investigation on microstructure and mechanical properties of friction stir welded lap joints between commercially pure copper and St37-2 mild steel. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 231-238.

Garai, Subhadra and Sinha, Arvind (2014) Biomimetic nanocomposites of carboxymethyl cellulose-hydroxyapatite: Novel three dimensional load bearing bone grafts. Colloids and Surfaces B Biointerfaces, 115 (IF-4.287). pp. 182-190.

Ghosh, Arpita and Sahoo, S and Ghosh, M and Ghosh, R N and Chakrabarti, D (2014) Effect of microstructural parameters,micro texture and matrix strain on the Charpy impact properties of low carbon HSLA steel containing MnS inclusions. Materials Science and Engineering A, 613 (IF-2.409). pp. 37-47.

Ghosh, Arpita and Sharma, Arun Kumar and Nayak, B and Palit Sagar, S (2014) Infrared thermography: An approach for iron ore gradation. Minerals Engineering, 62 (IF-1.714). pp. 85-90.

Ghosh, Ishita and Das, Suchandan K and Chakraborty, N (2014) An artificial neural network model to characterize porosity defects during solidification of A356 aluminum alloy. Neural Computing and Applications, 25 (IF-1.763). pp. 653-662.

Ghosh, M and Barat, K and Das, Swapan K and Ravi Kumar, B and Pramanick, A K and Chakraborty, J and Das , Goutam and Hadas, S and Bharathy, S and Ray , S K (2014) Variation in Mechanical Properties and Heterogeneity in Microstructure of High-Strength Ferritic Steel During Mill Trial. Metallurgical Transaction A, 45A (IF-1.730). pp. 2719-2731.

Ghosh, M and Gupta, R K and Husain, M M (2014) Friction Stir Welding of Stainless Steel to Al Alloy: Effect of Thermal Condition on Weld Nugget Microstructure. Metallurgical & Materials Transactions A, 45A (IF-1.730). pp. 854-863.

Goswami, B and Raj, A and Srivastava, S C and Ray, Ashok K (2014) Vanadium in industrial traditions and innovations. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 149-161.

Guguloth, K and Sivaprasad, S and Chakrabarti, D and Tarafder, S (2014) Low-cyclic fatigue behavior of modified 9Cr-1Mo steel at elevated temperature. Materials Science and Engineering A, 604 (IF-2.409). pp. 196-206.

Guguloth, K and Swaminathan, J and Ghosh, R N (2014) Creep life predicition of P91 Steel from stress relaxation tests. In: ECCC Creep & Fracture 2014, May 5-7, 2014, Rome, Italy.

Guha, Avijit and Nayar, S (2014) Low-Temperature Biomimetic Synthesis of beta-Tricalcium Phosphate by Altering pH. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 44(6) (IF-0.518). pp. 789-792.

Jindal, Vikas and Rupa, P K P and Mandal, G K and Srivastava, V C (2014) Effect of High-Temperature Severe Plastic Deformation on Microstructure and Mechanical Properties of IF Steel. Journal of Materials Engineering and Performance, 23(6) (IF-0.981). pp. 1954-1958.

Joseph, Kitheri and Kutty, K V Govindan and Goswami, M C and Rao, P R Vasudeva (2014) Viscosity and crystallization mechanism of cesium loaded iron phosphate glasses. Thermochimica Acta, 587 (IF-2.105). pp. 42-47.

Kalinkin, A M and Kumar, S and Gurevich , B I and Kalinkina, E V and Tyukavkina, V V (2014) Synthesis of geopolymer materials based on slags of nonferrous metallurgy with the use of mechanoactivation. Glass Physics and Chemistry, 40(1) (IF-0.532). pp. 26-30.

Kalpana, Y and Roy, S and Alka, (2014) Evaluation of plant extracts as corrosion inhibitors for Cu-alloys in river water. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 59-66.

Kar, Sujoy and Suman, Swati and Sivaprasad, S and Chaudhuri, Atanu and Bhattacharjee, A (2014) Processing-microstructure-yield strength correlation in a near β Ti alloy,Ti–5Al–5Mo–5V–3Cr. Materials Science and Engineering A, 610 (IF-2.409). pp. 171-180.

Karmakar, A and Sivaprasad, S and Kundu, S and Chakrabarti, D (2014) Tensile Behavior of Ferrite-Carbide and Ferrite-Martensite Steels with Different Ferrite Grain Structures. Metallurgical and Materials Transactions A, 45A(4) (IF-1.730). pp. 1659-1664.

Karmakar, A and Sivaprasad, S and Nath, S K and Misra, R D K and Chakrabarti, D (2014) Comparison Between Different Processing Schedules for the Development of Ultrafine-Grained Dual-Phase Steel. Metallurgical and Materials Transactions A, 45A(5) (IF-1.730). pp. 2466-2479.

Kavitha, C and Ravichandran, K and Sankara Narayanan, T S N (2014) Effect of surface mechanical attrition treatment (SMAT) on zinc phosphating of steel. Transactions of the Institute of Metal Finishing, 92(3) (IF-0.747). pp. 161-168.

Kavitha, C and Sankara Narayanan, T S N and Ravichandran, K and Park, I S and Lee, Min Ho (2014) Deposition of zinc-zinc phosphate composite coatings on steel by cathodic electrochemical treatment. Journal of Coatings Technology and Research, 11(3) (IF- 1.280). pp. 431-442.

Khalilahmada, and Ali, Muhammad and Ibrahim , Ather and Baig, Waqas Mehmood (2014) Optimising the yield of silicon carbide synthesised from indigenous biomass husk using different catalysts. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 173-177.

Khutia, N and Dey, P P and Sivaprasad, S and Tarafder, S (2014) Development of new cyclic plasticity model for 304LN stainless steel through simulation and experimental investigation. Mechanics of Materials, 78 (IF-2.225). pp. 85-101.

Kumar, A and Chacko, Z E and Malathi, M and Godiwalla, K M and Ajmani, S K and Ranganathan, S (2014) Desulfurization of Hot Metal Through In Situ Generation of Magnesium in 30-kg Molten Iron Bath-Influence of Inert Gas Flow Rate. Steel Research International, 85(5) (IF-1.023). pp. 927-934.

Kumar, Ravi (2014) Graphene Coated Stel. Masters thesis, NML.

Kumari, Anjan and Kumari, Archana and Jha, Manis K and Kumar, Vinod and Singh, R P and Yoo, Kyoungkeun (2014) Copper recovery from small devices populated on waste printed circuit boards. Journal of Metallurgy and Materials Science,, 56(1) (NON-SCI). pp. 41-51.

Kurniawan, M and Roy, Rajat K and Panda, A K and Greve, D W and Ohodnicki, P R and McHenry, Michael E (2014) Interplay of stress, temperature, and giant magnetoimpedance in amorphous soft magnets. Applied Physics Letters, 105 (22) (IF-3515). p. 222407.

Madge, S V and Caron, A and Gralla, R and Wilde, G and Mishra, Suman K (2014) Novel W-based metallic glass with high hardness and wear resistance. Intermetallics, 47 (IF-1.696). pp. 6-10.

Maheswari, N and Ghosh Chowdhury, S and Kumar, K C Hari and Sankaran, S (2014) Influence of alloying elements on the microstructure evolution and mechanical properties in quenched and partitioned steels. Materials Science and Engineering A, 600 (IF- 2.409). pp. 12-20.

Mandal, G K and Sau, D C and Das, Suchandan K and Bandyopadhyay, D (2014) A Steady State Thermal and Material Balance Model for an Iron Making Blast Furnace and Its Validation with Operational Data. Transaction of the Indian Institute of Metals, 67(2) (IF-0.427). pp. 209-221.

Mazinan , Vahid and Nosrati , Hassan (2014) Effect of primary materials ratio and their stirring time on SiC nanoparticle production efficiency through sol gel process. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 29-34.

Mazinani, Vahid (2014) Effect of pH on SiC nanopowder synthesized by sol-gel method. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 143-147.

Metya, Avijit Kr and Palit Sagar, S and Ghosh Chowdhury, S (2014) Evaluation of Crystallographic Texture in SS316L Steel by Ultrasonic Signal Analysis. In: National Conference on Nondestructive Evaluation (NDE-2014), 04-06 Dec 2014, Pune.

Mishra, Aadarsh (2014) The films of tin sulphide for use in thin film solar cell devices. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 73-76.

Mishra, Suman K and Bhople, A and Paswan, S (2014) Microstructure, hardness, toughness and oxidation resistance of Al2O3-ZrB2 composite with different Ti percentages prepared by in-situ SHS dynamic compaction. International Journal of Refractory Metals and Hard Materials, 43 (IF-1.764). pp. 7-12.

Mishra, Suman K and Gokuul, V and Paswan, S (2014) Alumina-titanium diboride in situ composite by self-propagating high-temperature synthesis (SHS) dynamic compaction: Effect of compaction pressure during synthesis. International Journal of Refractory Metals and Hard Materials, 43 (IF-1.764). pp. 19-24.

Mishra, Swati and Nayar, S (2014) Protein-polymer Matrix Mediated Synthesis of Silver Nanoparticles. Nanobiomedicine, 1(3) . pp. 1-5.

Mishra, T and Wang, Lei and Hahn, Robert and Schmuki, Patrik (2014) In-situ Cr doped anodized TiO2 nanotubes with increased photocurrent response. Electrochimica Acta, 132 (IF-4.086). pp. 410-415.

Mukhopadhyay, N K and Ali, F and Scudino, S and Khoshkhoo, M S and Stoica, M and Srivastava, V C and Uhlenwinkel, V and Vaughan, G and Suryanarayana, C and Eckert, J (2014) Inverse Hall Petch Like Mechanical Behaviour in Nanophase Al-Cu-Fe Quasicrystals: A New Phenomenon. Acta Physica Polonica A , 126(2) (IF-0.604). pp. 543-548.

Murthy, G V S and Das, Swapan K and Ravi Kumar, B (2014) Comprehensive Microstructural Characterization of γ′ in a Nimonic Alloy Using Ultrasonic Velocity Measurements. Metallography, Microstructure, and Analysis, 3(4) . pp. 328-335.

Nodland, David and Ghosh, Arpita and Zargarzadeh, H and Jagannathan, S (2014) Neuro-optimal control of an unmanned helicopter. Journal of Defence Modelling and Simulation, 11(1) (IF-). pp. 5-18.

Palit Sagar, S (2014) Non-linear ultrasonic for structural damage assessment: Approach at CSIR-National Metallurgical Laboratory. In: Workshop on current and future trends of Non-linear ultrasonic technique for NDE, 21-24 Oct, 2014, Seoul, Korea.

Panindre, Anup M and Ranjan, Nitish and Sahu, Rina (2014) Reclaiming iron from solid wastes via Romelt process. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 163-172.

Parmar, Kavita and Bhattacharjee, S (2014) Studies on Pb(II) and Cd(II) adsorption by Fe(II) and Fe(III) silicate precipitation tubes in aqueous medium. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 125-135.

Pathak, Arvind and Kumar, Sanjay and Jha, Vinay Kumar (2014) Development of Building Material from Geopolymerization of Construction and Demolition Waste (CDW). Transactions of the Indian Ceramic Society, 73(2) (IF-0.233). pp. 133-137.

Pramanick, A K (2014) Al-Si-Zr Alloy Based Material For Biomedical Application. Grant in Aid (GAP). CSIR-NML, CSIR-NML. (Unpublished)

Pramanick, A K and Gorai, S and Ghosh, M and Das, Goutam and Das, Swapan K (2014) Optimization of strength in V/N micro alloyed steel by varying vanadium content at fixed Nitrogen level. Collaborative (CLP). CSIR-NML, CSIR-NML, Jamshedpur. (Unpublished)

Raj, A and Goswami, B and Kumar, S B and Krishna, G and Roy, Nilima and Ray, Ashok K (2014) Damage Analysis of Service Exposed Reformer Tubes in Petrochemical Industries. High Temperature Materials and Processes, 33(3) (IF-0.356). pp. 201-216.

Raj, A and Goswami, B and Kumar, S B and Krishna, G and Roy, Nilima and Ray, Ashok K (2014) Performance and Life Assessment of Reformer Tubes in Petrochemical Industries. High Temperature Materials and Processes, 33(3) (IF-0.356). pp. 217-230.

Raj, A and Goswami, B and Ray, Ashok K (2014) Creep and Fatigue Behavior in Micro-alloyed Steels - A Review. High Temperature Materials and Processes, 33(1) (IF-0.356). pp. 1-12.

Raji, K (2014) Influence of density on Al-Cu composition during compaction process. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 53-57.

Ray, Ashok K and Goswami, B and Raj, A and Singh, M P (2014) Frontiers of micro-alloyed steel for industrial merchandising - 3. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 77-91.

Ray, Ashok K and Goswami, B and Raj, A and Singh, M P (2014) Frontiers of micro-alloyed steel for industrial merchandising-2. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 1-14.

Ray, Ashok K and Roy, Nilima and Matwa, M and Davuluri, A and Kumari, A and Kumar, P and Mundhada, D and Kaushal, V and Roy, B N (2014) Uncertainty in Damage Assessment and Remaining Life Prediction of Engineering Materials Used In Petrochemical Industry. Petroleum & Environmental Biotechnology, 5(4) . pp. 1-16.

Roy, P K and Ray, Ashok K and Parida, N (2014) Creep Life Prediction of 1.25Cr-0.5Mo, 2.25Cr - 1Mo and 9Cr-1Mo Steels by accelerated creep rupture tests - A comparative study. [Presentation Slide] (Unpublished)

Roy, Rajat K (2014) Recrystallization Behavior of Commercial Purity Aluminium Alloys. In: Light Metals Alloys Applications. InTech Europe Janeza Trdine 9 51000 Rijeka, Croatia, Croatia.

Roy, Rajat K and Das, Swapan K and Panda, A K and Mitra, Amitava (2014) Analysis of Superheater Boiler Tubes Failed through Non-linear Heating. Procedia Engineering, 86 (NIF-0.629). pp. 926-932.

Roy, Rajat K and Das, Swapan K and Srivastava, Abhinav and Panda, A K and Mitra, A (2014) Damage evaluation of fossil fuelled power plant boiler tubes through magnetic Barkhausen technique. Engineering Failure Analysis, 44 (IF-1.130). pp. 195-201.

Roy, Rajat K and Panda, A K and Mitra, Amitava (2014) The joining behavior of structural steel assemblies of SS321 and 9Cr-1Mo by Cu based rapidly solidified filler alloy. Conference proceeding of ICONS 2014 . (Submitted)

Rupa, P K P and Chakraborti, P C and Mishra, Suman K (2014) Structure and indentation behavior of nanocomposite Ti–B–N films. Thin Solid Films, 564 (IF-1.867). pp. 160-169.

Sambamurthy, E and Dutta, Siuli and Panda, A K and Mitra, A and Roy, Rajat K (2014) Evaluation of post-weld heat treatment behavior in modified 9Cre1Mo steel weldment by magnetic Barkhausen emission. International Journal of Pressure Vessels and Piping, 123-124 (IF-1.078). pp. 86-91.

Sarkar, B and Dalal, Biswajit and Ashok, V D and Chakrabarti, Kaushik and Mitra, A and De, S K (2014) Magnetic properties of mixed spinel BaTiO3-NiFe2O4 composites. Journal of Applied Physics, 115(12) (IF- 2.185).

Seth, Prem Prakash (2014) Study of Bake-hardening behaviour of ultra-low carbon BH 220 steel at different strain rates. Masters thesis, National Institute of Technology, Rourkela.

Shah, Minal and Roy, S and Sahu, Rina (2014) Production of perfect sinter-Need for blast furnaces. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 223-229.

Sharma, S and Azad, S C and Khan, Md Soaib and Ranjan, R and Behera, Banarji and Choudhura, R N P (2014) Effect of Gd3+-substitution on structural and electrical properties of lead zirconate titanate (PZT; Zr/ Ti = 55/45) ceramics. Journal of Metallurgy and Materials Science, 56(2) (NON-SCI). pp. 137-142.

Singh, Ashutosh Pratap (2014) Optimization of Strength of Micro-alloy Vanadium Steel by Fixing The Nitrogen Content& Varying The Vanadium Content. Masters thesis, CSIR-NML .

Singh, C B and Gupta, R N and Vaish, A K and Singh, S D and Goswami, N G (2014) Ancient iron making from lean grade ores in India - An introspection. Journal of Metallurgy and Materials Science , 56(2) (NON-SCI). pp. 93-105.

Singh, Raghuvir and Kumar, Damodar and Mishra, Suman K and Tiwari, S K (2014) Laser cladding of Stellite 6 on stainless steel to enhance solid particle erosion and cavitation resistance. Surface and Coatings Technology, 251 (IF-2.199). pp. 87-97.

Singh, Rajesh Kumar (2014) Corrosion protection of mild steel by organic inhibitors. Journal of Metallurgy and Materials Science, 56(3) (NON-SCI). pp. 187-193.

Singh, Rajesh Kumar (2014) Corrosion protection of stainless steel in 15% H SO 2 4. Journal of Metallurgy and Materials Science, 56(4) (NON-SCI). pp. 239-244.

Singh, Ranjeet K and Dey, Shobhana and Mohanta, M K and Das, Avimanyu (2014) Enhancing the Utilization Potential of a Low Grade Chromite Ore through Extensive Physical Separation. Separation Science and Technology, 49(12) (IF-1.200). pp. 1937-1945.

Singh, Satnam and Roy, R K and Mahato, B and Ghosh, M and Mitra, A and Panda , A K (2014) Effect of Al incorporation for Co on the gamma-beta phase boundary of rapidly solidified CoNiAl ferromagnetic shape memory alloys. Journal of Magnetism and Magnetic Materials, 368 (IF-2.002). pp. 379-383.

Singhbabu, Y N and Kumari, Priya and Parida, Sunena and Sahu, Ranjan K (2014) Conversion of pyrazoline to pyrazole in hydrazine treated N-substituted reduced graphene oxide films obtained by ion bombardment and their electrical properties. Carbon, 74 (IF-6.160). pp. 32-43.

Sinha, Arvind (2014) Biomimetic Materials. Journal of Powder Metallurgy & Mining, 3 . p. 1.

Sinha, N and Singh, R (2014) Beneficiation and purification of a low grade and finely disseminated graphite ore. Journal of Metallurgy and Materials Science, 56(1) (NON-SCI). pp. 15-22.

Sivaprasad, S and Bar, H N and Gupta, Suneel K and Arora, Punit and Bhasin, V and Tarafder, S (2014) A comparative assessment of cyclic deformation behaviour in SA333 Gr.6 steel using solid, hollow specimens under axial and shear strain paths. International Journal of Fatigue, 61 (IF- 1.916). pp. 76-86.

Soupramanien, C and Swaminathan, J (2014) Failure analysis of refractory anchors of powder boiler. Procedia Engineering, 86 (NIF-0.629). pp. 919-925.

Srivastava, V C and Ellendt, N and Meyer, C and Uhlenwinkel, V (2014) Bulk synthesis of amorphous and nano-crystalline materials by spray forming. Materialwissenschaft und Werkstofftechnik, 45(8) (IF-0.505). pp. 744-757.

Swaminathan, J and Das, C R and Baral, Jayashree and Phaniraj, C and Ghosh, R N and Albert, S K and Bhaduri, A K (2014) Creep strength behavior of boron added P91 steel and its weld in the temperature range of 600–650 degree C. In: Energy Materials Conference proceedings 2014, November 4-6, 2014, Xi'an Shaanxi Provice, China.

This list was generated on Thu Mar 28 16:07:37 2024 IST.