Items where Division is "Material Science and Technology" and Year is 2001

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 49.

Bhattacharya, D K (2001) Non-Destructive Techniques for Microstructural and Structural Characterisation. In: UNSPECIFIED.

Bhattacharya, D K (2001) Non-destructive techniques for microstructural and structural characterisation. In: UNSPECIFIED.

Chattoraj, I (2001) Notch Effects in Corrosive Failure. In: UNSPECIFIED.

Deb, P and Ghosh, S and Basumallick, A (2001) Preparation of nano-sized CoFe2O4 particles from a non-aqueous precursor. Journal of Metallurgy and materials Science, 43 (2). pp. 113-117.

Desai, P K (2001) Life Extension of Aircraft Components - An IAF Perspective. In: UNSPECIFIED.

Dogan , Ali and Aslantas, M and Havvatoglu, Y (2001) Investigation of magnetostriction strain for martensitic phase transformation FCC to FCT. Journal of Metallurgy and materials Science, 43 (1). pp. 1-7.

Ghatak, S K (2001) High temperature superconducting materials. Journal of Metallurgy and materials Science, 43 (2). pp. 67-75.

Ghosh, R N (2001) Remaining life assessment of engineering components. In: UNSPECIFIED.

Ghosh, R N (2001) Remaining Life Assessment of Engineering Components. In: UNSPECIFIED.

Ghosh Chowdhury, S and Kumar, Pravesh and Das, Swapan K and Bhattacharya, D K and Parida, N (2001) Failure analysis of high temperature studs. Engineering Failure Analysis, 8 (6). pp. 521-528.

Gourishanker, S (2001) Recent Techniques for Life Assessment of Boiler Components. In: UNSPECIFIED.

Govind, and Nair, K S and Mittal, M C and Lal, Kishori and Mahanti, R K and Sivaramakrishnan, C S (2001) Development of rapidly solidified (RS) magnesium–aluminium–zinc alloy. Materials Science and Engineering A, 304-306 . pp. 520-523.

Kushwaha, H S and Vaze, K K and Bhasin, V (2001) Design Criteria for Fracture Assessment of Pressurized Nuclear Components. In: UNSPECIFIED.

Maji, Bikas Chand and Ray, R K and Madangopal, Krishan (2001) Evolution of texture and microstructure during deformation and annealing of Fe3AI based alloy. Journal of Metallurgy and materials Science, 43 (2). pp. 103-111.

Mitra, A (2001) Damage assessment of process heater tube by magnetic technique : a case study. In: UNSPECIFIED.

Mitra, A (2001) Damage Assessment of Process Heater Tube by Magnetic Technique :A Case Study. In: UNSPECIFIED.

Mitra, A and Panda, A K and Rao, Venkatesh (2001) Gaint magneto-impedance behaviour in amorphous and nanocrystalline soft magnetic materials. Journal of Metallurgy and materials Science, 43 (2). pp. 127-133.

Mitra, A and Panda, A K and Singh, S R and Ramachandrarao, P (2001) Preparation and characterization of Fe–Nb–Cu–Si–B-based nanocrystalline soft magnetic materials. Applied Surface Science, 182 (3-4). pp. 321-325.

Mondal, Sudipta and Saha, M B and Ray, Ajoy K (2001) Processing and characterisation of Ag-Cu- Ti brazing alloys. Journal of Metallurgy and materials Science, 43 (1). pp. 17-23.

Nayar, S and Sinha, Arvind and Das, Samar and Ramachandrarao, P (2001) In situ synthesis of nanosized cadmium sulfide using bovine serum albumin. Journal of Materials Science Letters, 20 (23). pp. 2099-2100.

Panda, A K and Chattoraj, I and Mitra, A (2001) Crystallization and magnetic properties of rapidly solidified Fe-Nb-M-Si-B (M=Cu, Mn, Pt). Materials Science and Engineering A, 304-306 . pp. 950-953.

Panda, A K and Roy, S and Singh, S R and Rao, Venkatesh and Pramanik, S and Chattoraj, I and Mitra, A and Ramachandrarao, P (2001) Effect of quenching rate on the properties of melt-spun FeNbCuSIB ribbons. Materials Science and Engineering A, 304-306 . pp. 457-461.

Parida, N and Tarafder, S (2001) Failure analysis of turbo-generator of a 10 MW captive power plant. Engineering Failure Analysis, 8 (3). pp. 303-309.

Pathak, L C and Bandyopadhyay, D and Srikanth, S and Das, Swapan K (2001) Effect of heating rates on the synthesis of Al2O3–SiC composites by the self-propagating high-temperature synthesis (SHS) technique. Journal of the American Ceramic Society, 84 (5). pp. 915-920.

Pathak, L C and Mishra, Suman K and Das, Swapan K and Bhattacharya, D (2001) Effect of sintering atmosphere on the weak-link behaviour of YBCO superconductors. Physica C: Superconductivity, 351 (3). pp. 295-300.

Prakash Narayan, S (2001) Effect of hot workability parameters on the magnetic properties of nano-crystalline Nd-Fe-B magnets. Journal of Metallurgy and materials Science, 43 (2). pp. 135-140.

Pramanick, A K (2001) Nature of streaking and ordering in rapidly solidified Al–Co–Cu–Ni system. Materials Science and Engineering, 304-306 . pp. 818-821.

Pramanick, A K (2001) Special Diffraction Effects in Al7o_xCo15Cux+yNi15_y Decagonal Alloys. Ferroelectrics, 250 . pp. 273-279.

Raj, Baldev and Jayakumar, T (2001) Assessment of Defects and Microstructures for Evaluating Damage in Pressure Retaining Components. In: Proceedings of Workshop on Recent Trends in Structural Integrity Assessment. NML, Jamshedpur, India, Jamshedpur, pp. 85-104. ISBN 81-87053-62-3

Ranganath, V R (2001) Shaft Failures in Coal Handling Plants. In: Proceedings of Workshop on Recent Trends in Structural Integrity Assessment. NML, Jamshedpur, India, Jamshedpur, pp. 32-38. ISBN 81-87053-62-3

Raposo, V and Mitra, A and Li, YF and Vazquez, M (2001) Spontaneous mechanical rotation of as-cast and annealed FeSiBNbCu wires under high-frequency axial ac field. Journal of Physics D-Applied Physics, 34 (9). pp. 1346-1351.

Ray, Ashok K and Roy, Nilima and Godiwalla, K M (2001) Crack propagation studies and bond coat properties in thermal barrier coatings under bending. Bulletin of Materials Science, 24 (2). pp. 203-209.

Ray, Ashok K and Tiwari, Y N and Sinha, R K and Sinha, S K and Roy, P K and Singh, Raghubir and Chaudhuri, S (2001) Mechanical property evaluation and remaining life assessment of service-exposed steam pipe of boilers in a thermal power plant. High Temperature Materials and Processes, 20 (1). pp. 39-50.

Sankara Rao, K Bhanu and Nagesha, A (2001) Significance of Creep-Fatigue Interactions in Strctural Integrity Assessment. In: Proceedings of Workshop on Recent Trends in Structural Integrity Assessment. NML, Jamshedpur, India, Jamshedpur, pp. 164-184. ISBN 81-87053-62-3

Satendra, Kumar and Singh, K K and Ramachandrarao, P (2001) Effects of fly ash additions on the mechanical and other properties of porcelainised stoneware tiles. Journal of Materials Science, 36 (24). pp. 5917-5922.

Singh, Raghubir (2001) Remaining Life Assessment of Engineering Components after Prolonged Creep Exposure: Some Issues and Case Histories. In: Proceedings of Workshop on Recent Trends in Structural Integrity Assessment. NML, Jamshedpur, India, Jamshedpur, pp. 70-84. ISBN 81-87053-62-3

Singh, S R (2001) Catastrophic carburisation in petrochemical industry. In: Recent trends in structural integrity assessment: proceedings of workshop, Jan 18-19, 2001. NML, Jamshedpur, pp. 46-57. ISBN 81-87053-62-3

Singh, S R (2001) Catastrophic Carburisation in Petrochemical Industry. In: Proceedings of Workshop on Recent Trends in Structural Integrity Assessment. National Metallurgical Laboratory, Jamshedpur, Jamshedpur, pp. 46-57. ISBN 81-87053-62-3

Sinha, Arvind and Agrawal, A and Das, S K and Ravi Kumar, B and Rao, Venkatesh and Ramachandrarao, P (2001) On the growth of monoclinic calcium carbonate in poly(vinyl alcohol). Journal of Materials Science Letters, 20 (17). pp. 1569-1572.

Sinha, Arvind and Chakraborty, J and Das, Swapan K and Rao, Venkatesh and Ramachandrarao, P (2001) Oriented arrays of nanocrystalline magnetite in polymer matrix produced by biomimetic synthesis. Materials Transactions, 42 (8). pp. 1672-1675.

Sinha, Arvind and Das, Swapan K and Rao, Venkatesh and Ramachandrarao, P (2001) Biomimetic route to produce nanosized inorganic crystals. Scripta Materialia, 44 (8-9). pp. 1933-1936.

Sinha, Arvind and Das, Swapan K and Rao, Venkatesh and Ramachandrarao, P (2001) Patterning of copper particles on polymeric surface. Journal of Materials Research, 16 (5). pp. 1354-1357.

Sivaprasad, S and Tarafder, S and Das, Swapan K and Ranganath, V R and Ray, K K (2001) The role of stereology in estimation of ductile fracture toughness of structural materials. Image Analysis in Materials and Life Sciences . pp. 86-95.

Sivaramakrishnan, C S (2001) Solidification Processing of aluminium alloys. Journal of Metallurgy and materials Science, 43 (2). pp. 57-66.

Tarafder, S (2001) Fracture mechanisms and the quantification of fracture resistance. In: Recent trends in structural integrity assessment: Proceedings of workshop, Jan 18-19, 2001. NML, Jamshedpur, pp. 105-129. ISBN 81-87053-62-3

Tarafder, S (2001) Fracture Mechanisms and the Quantification of Fracture Resistance. In: Proceedings of Workshop on Recent Trends in Structural Integrity Assessment. NML, Jamshedpur, India, Jamshedpur, pp. 105-129. ISBN 81-87053-62-3

Tarafder, S and Ranganath, V R and Sivaprasad, S and Johri, P (2001) Specimen Size and Constraint Effects on J-R Curves of SA333 Gr.6 Steel. Sponsored (SSP). CSIR-NML, Jamshedpur, Jamshedpur.

Venkateswarlu, K and Murty, B S and Chakraborty, M (2001) Effect of hot rolling and heat treatment of Al–5Ti–1B master alloy on the grain refining efficiency of aluminium. Materials Science and Engineering A, 301 (2). pp. 180-186.

Venkatrama, M and Mohanty, O N and Ghosh, R N (2001) Modelling of transformation kinetics in HSLA 100 steel during continuous cooling. Scandinavian Journal Of Metallurgy, 30 (1). pp. 8-13.

This list was generated on Fri Mar 29 21:26:12 2024 IST.