Items where Division is "Material Science and Technology" and Year is 1997

Bahadur, Aruna (1997) Residual stress evaluation using XRD and failure analysis. In: Proceedings : COFA-1999, 1999, NML-Jamshedpur.

Bandyopadhyay, D and Pathak, L C and Mukherjee, I and Das, S K and Ganguly, R G and Ramachandrarao, P (1997) Fabrication of Al2O3-SiCw in situ composite through a new combustion technique. Materials Research Bulletin, 32 (1). pp. 75-82.

Bhattacharya, D K (1997) Failures of welded joints. In: UNSPECIFIED.

Bhattacharya, D K and Vaidyanathan, S (1997) Effect of the demagnetisation factor on the Barkhausen noise signal. Journal of Magnetism and Magnetic Materials, 166 (1-2). pp. 111-116.

Bodas, M G and Mathur, S B (1997) Studies in reduction-roast leaching ion exchange of copper converter slag from an Indian copper complex, Ghatshila. Industrial & Engineering Chemistry Research, 36 (12). pp. 5419-5424.

Chaudhuri, S and Singh, Raghubir (1997) High temperature boiler tube failures: case studies. In: UNSPECIFIED.

Das, Goutam (1997) Failure analysis of a steam turbine casing. In: UNSPECIFIED.

Das, S (1997) Metallography in failure prediction: an in-situ approach. In: UNSPECIFIED.

Das, S K and Daspoddar, P K (1997) Dehydration kinetics of hydrated calcium dialuminate. Thermochimica Acta, 293 (1-2). pp. 125-128.

Das, S K and Kumar, Sanjay and Daspoddar, P K (1997) Crystal morphology of calcium aluminates hydrated for 14 days. Journal of Materials Science Letters, 16 (9). pp. 735-736.

Das, Samar and Joarder, A (1997) Effect of long-term service exposure at elevated temperature on microstructural changes of 5Cr-0.5Mo steels. Metallurgical and Materials Transactions A, 28 (8). pp. 1607-1616.

Das, Suchandan K (1997) Function space theory of dynamic nucleation during solidification at high cooling rates. Bulletin of Materials Science, 20 (5). pp. 643-650.

Das, Swapan K and Kumar, S and Singh, K K and Shah, R G (1997) Some studies on olivine fines and clay mixtures. In: UNSPECIFIED.

Ghosh, R N (1997) Failure analysis: techniques and few case studies. In: UNSPECIFIED.

Ghosh, R N (1997) Structural and component integrity. In: UNSPECIFIED.

Ghosh Chowdhury, S (1997) Failures due to improper hardening of steel components. In: UNSPECIFIED.

Maulik, S C (1997) R&D on beneficiation and sintering of iron ore at national metallurgical laboratory (NML). Ironmaking resources and reserves estimation, (5). pp. 203-209.

Mishra, Suman K and Das , S and Goel, R P and Ramachandrarao, P (1997) Self-propagating high temperature synthesis (SHS) of titanium carbide. Journal of Materials Science Letters, 16 (12). pp. 965-967.

Mishra, Suman K and Pathak, L C and Rao, Venkatesh (1997) Synthesis of submicron Ba-hexaferrite powder by a self-propagating chemical decomposition process. Materials Letters, 32 (2-3). pp. 137-141.

Mitra, A (1997) Failure analysis by advanced magnetic techniques. In: UNSPECIFIED.

Mitra, A and Chen, Z J and Laabs, F and Jiles, D C (1997) Micromagnetic Barkhausen emissions in 2 center dot 25 wt% Cr-1wt% Mo steel subjected to creep. Philosophical magazine A-Physics of condensed matter structure defects and mechanical properties, 75 (3). pp. 847-859.

Mitra, A and Jiles, D C (1997) Magnetic Barkhausen emissions in as-quenched Fe-Si-B amorphous alloy. Journal of Magnetism and Magnetic Materials, 168 (1-2). pp. 169-176.

Mukhopadhyay, N K (1997) Failures due to hydrogen embrittlement. In: UNSPECIFIED.

Mukhopadhyay, N K and Das, Swapan K and Ravi Kumar, B and Ranganath, V R and Ghosh Chowdhury, S (1997) Premature failure of a leaf spring due to improper materials processing. Engineering Failure Analysis, 4 (3). pp. 161-170.

Mukhopadhyay, N K and Sinha, Arvind (1997) Quasicrystals. Current Science, 73 (7). pp. 558-560.

Palit Sagar, S and Chattoraj, I and Rao, Venkatesh and Ghatak, S K and Mitra, A (1997) Influence of hydrogen on the magnetic properties of amorphous Fe---Si---B fibres. Journal of Magnetism and Magnetic Materials, 166 (1-2). pp. 186-192.

Palit Sagar, S and Chattoraj, I and Rao, Venkatesh and Ghatak, S K and Mitra, A (1997) Influence of hydrogen on the magnetic properties of amorphous Fe-Si-B fibres (vol 166, pg 186, 1997). Journal of Magnetism and Magnetic Materials, 172 (3). pp. 322-323.

Pandey, J L and Banerjee, M K (1997) High-temperature-resistant (slurry-based) coatings. Anti-corrosion methods and materials, 44 (6). 368- .

Parida, N (1997) Application of acoustic emission testing in failure analysis: case studies. In: UNSPECIFIED.

Parida, N and Pani, B B and Ravi Kumar, B (1997) Acoustic emission assisted compaction studies on iron, iron-aluminium and iron-cast iron powders. Scripta Materialia, 37 (11). pp. 1659-1663.

Pathak, L C and Mishra, Suman K and Bhattacharya, D and Chopra, K L (1997) A comparative study of YBCO powders prepared by different processes. Journal of Materials Science Letters, 16 (14). pp. 1208-1211.

Prasad, B K and Venkateswarlu, K and Das, S and Jha, A K and Dasgupta, R (1997) Influence of SiC reinforcement on the abrasive wear response of an Al-Cu alloy under conditions of varying abrasive size and applied load. Material Science letters, 16 . pp. 1113-1115.

Ram, S and Banerjee, H D and Halder, S and Ramachandrarao, P (1997) Formation of Nd2Fe14B hydride by milling of anhydride particles in toluene in a closed reactor. Bulletin of Materials Science, 20 (8). pp. 1049-1058.

Ram, S and Fecht, H J and Halder, S and Ramachandrarao, P and Banerjee, H D (1997) Calorimetric study of the desorption of the interstitial hydrogen atoms in ferromagnetic Nd2Fe14BHx (x<=5) microcrystals. Physical Review B (PRB), 56 (2). pp. 726-737.

Ramachandrarao, P (1997) Evolution of microstructure in rapidly solidified alloys. Metals Materials and Processes, 9 (3). pp. 221-228.

Ray, Ajoy K and Mishra, K K and Chaudhary, P N (1997) Failure analysis of rolls of cold rolling mill in steel plant. In: Failure analysis: proceedings of the clinic on failure analysis, februrary 18-19,1997. NML, Jamshedpur, pp. 37-46.

Ray, Ashok K and Tiwari, Y N and Sinha, R K and Singh, Raghuvir and Chaudhuri, S (1997) Remaining life assessment of service exposed reactor and distillation column materials used in a petrochemical industry. In: Recent Advances in Metallurgical Processes - Vol I, 16-19 July 1997, I I S, Banglore.

Singh, Raghubir and Singh, S R (1997) Remaining creep life study of Cr---Mo---V main steam pipe lines. International Journal of Pressure Vessels and Piping, 73 (1). pp. 89-95.

Sinha, A N (1997) Application of metallography in failure investigations: some case studies. In: Failure analysis: Proceedings of the clinic on failure analysis, Februrary 18-19,1997. NML, Jamshedpur, pp. 94-106.

Sinha, Arvind and Ramachandrarao, P (1997) Quasiperiodic lattices. Progress in Crystal Growth and Characterization of Materials, 34 (1-4). pp. 147-156.

Sridhar, G (1997) Failure analysis of free-cutting grade steels: a case study. In: Failure analysis: Proceedings of the clinic on failure analysis, februrary 18-19,1997. NML, Jamshedpur, pp. 121-139.

Tarafder, S (1997) Mechanisms of fatigue failures. In: Failure analysis: proceedings of the clinic on failure analysis, februrary 18-19,1997. NML, Jamshedpur, pp. 147-168.