Items where Author is "Venugopalan, T"

Article

Sundara Bharathy , R and Venugopalan, T and Ghosh, M (2023) Efect of Precipitation Characteristics on Mechanical Properties and Stretch Flangeability of Nano‑Dispersion Strengthened High Strength Ferritic Steel. Metallography, Microstructure & Analysis .

Bharathy, R Sundara and Venugopalan, T and Ghosh, M (2022) A Study on Brittle Cleavage Fracture on Ti-Mo Nano-precipitation-Strengthened High-Strength Steel. J of Mats. Engg. Performance .

Walunj, M G and Mandal, G K and Ranjan, R K and Pais, R and Mishra, Suman K and Venugopalan, T and Pathak, L C (2021) Role of dew points and Fe pre-coats on the galvanizing and galvannealing of dual phase steel. Surface and Coatings Technology, 422 .

Alex, T C and Mucsi, G and Venugopalan, T and Kumar, Sanjay (2021) BOF Steel Slag: Critical Assessment and Integrated Approach for Utilization. Journal of Sustainable Metallurgy .

Pal, Jagannath and Rajshekar, Y and Kumar, Sanjay and Venugopalan, T (2021) Development of carbon composite iron ore slime briquettes for using in ironmaking. Journal of Metallurgy and Materials Science, Vol. 63, No. 1-2, January-June 2021 . pp. 1-11.

Miadad, S J and Venugopalan, T and Halder, N and Kumar, B Ravi (2020) On the Study of Batch Annealing Parameter Optimization for Higher Lankford Value in High Phosphorus Interstitial Free High Strength Steel. Journal of Materials Engineering and Performance, 29 . pp. 7598-7606.

Pal, J and Ghorai, S and Venugopalan, T (2020) Effect of high Blaine iron ore fines in hematite ore pelletization for blast furnace. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 129 (3–4) (IF-0.89). pp. 299-307.

Adhikary, M and Chakraborty, A and Das, A and Venugopalan, T and Kumar, B R (2019) Influence of annealing texture on dynamic tensile deformation characteristics of Dual phase steel (vol 736, pg 209, 2018). Materials Science and Engineering: A, 756 (IF-4.081). p. 312.

Mandal, G K and Kamaraj, A and Minj, M.M. and Das, S K and Ramanan, R B V and Venugopalan, T (2019) Development of Speciality Grade Wire by Controlling the Inclusions in High-Carbon Steel Using Synthetic Slag Treatment. Transactions of the Indian Institute of Metals, 72(2) . pp. 369-381.

Singh, G and Nanda, T and Miadad, S J and Gorain, N C and Venugopalan, T and Kumar, B R (2019) Correlation between Luders band formation and precipitation kinetics behaviour during the industrial processing of interstitial free high strength steels. Archives of Civil and Mechanical Engineering, 19(2) . pp. 469-483.

Adhikary, M and Chakraborty, A and Das, A and Venugopalan, T and Ravi Kumar, B (2018) Influence of annealing texture on dynamic tensile deformation characteristics of Dual phase steel. Materials Science and Engineering: A , 736 (IF-4.081). pp. 209-218.

Rajshekar, Y and Pal, J and Venugopalan, T (2018) Development of hematite ore pellet utilizing mill scale and iron ore slime combination as additive. Journal of Mining and Metallurgy Section B: Metallurgy, 54(2) . pp. 197-208.

Pal, Jagannath and Ghorai, S and Venugopalan, T (2018) Effect of high Blaine iron ore fines in hematite ore pelletization for blast furnace. Mineral Processing and Extractive Metallurgy . (In Press)

Kumar, B Ravi and Singh, Vishal and Nanda, T and Adhikary, M and Haldar, Nimai and Venugopalan, T (2018) Effect of Tailoring Martensite Shape and Spatial Distribution on Tensile Deformation Characteristics of Dual Phase Steels. Journal of Engineering Materials and Technology, 140(2) (IF- 1.141).

Singh, M and Das, A and Venugopalan, T and Mukherjee, K and Walunj, Mahesh and Nanda, T and Ravi Kumar, B (2018) Impact of Martensite Spatial Distribution on Quasi-Static and Dynamic Deformation Behavior of Dual-Phase Steel. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, 49A(2) (IF-3.094). pp. 463-475.

Rajshekhar, Y and Pal, J and Venugopalan, T (2018) Mill scale as a potential additive to improve the quality of hematite ore pellet. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.5). pp. 202-210.

Rajshekhar, Y and Pal, J and Venugopalan, T (2018) Sintering characteristics and kinetics of acidic haematite ore pellets with and without mill scale addition. Ironmaking & Steelmaking, 45(4) (IF-1.205). pp. 325-334.

Abhilash, and Meshram, Pratima and Sarkar, Supriyo and Venugopalan, T (2017) Exploring Blast Furnace Slag As A Secondary Resource For Extraction Of Rare Earth Elements. Minerals & Metallurgical Processing Journal, 34(4) (IF-0.692). pp. 178-182.

Ravi Kumar, B and Patel, N K and Mukherjee, K and Walunj, Mahesh and Mandal, G K and Venugopalan, T (2017) Ferrite channel effect on ductility and strain hardenability of ultra high strength dual phase steel. Materials Science and Engineering A- Structural Materials Properties Microstructure and Processing, 685 (IF-3.094). pp. 187-193.

Nath, S K and Rajshekhar, Y and Alex, T C and Venugopalan, T and Kumar, Sanjay (2017) Evaluation of the Suitability of Alternative Binder to Replace OPC for Iron Ore Slime Briquetting. Transactions of the Indian Institute of Metals, 70(8) (IF- 0.533). pp. 2165-2174.

Pal, J and Ghorai, S and Ammasi, A and Hota, S K and Koranne, V M and Venugopalan, T (2017) Improving reductibility of iron ore pellets by optimization of physical parameters. Journal of Mining and Metallurgy Section B- Metallurgy, 53(1) (IF-0.804). pp. 37-46.

Paswan, Dayanand and Venugopalan, T and Malathi, M (2017) Process feasibility for reduction of ilmenite pellets with non coking coal and separation of TiO from iron. Journal of Metallurgy and Materials Science, 59(4) . pp. 163-171.

Singh, Virendar and Adhikary, M and Venugopalan, T and Chakraborty, A and Nanda, T and Kumar, B Ravi (2017) Role of recrystallization and pearlite dissolution in industrial processing of DP590 steels. Materials and Manufacturing Processes, 32(16) (IF-2.274). pp. 1806-1816.

Chakraborty, A and Adhikary, M and Venugopalan, T and Nanda, T and Kumar, B R (2016) Effect of ferrite-martensite interface morphology on bake hardening response of DP590 steel. Materials Science and Engineering A-Structural Materials Properties Micro structure and Processing, 676 (IF-3.094). pp. 463-473.

Sharma, S and Nanda, T and Adhikary, M and Venugopalan, T and Kumar, B Ravi (2016) A simulation study of pearlite-to-austenite transformation kinetics in rapidly heated hot-rolled low carbon steel. Materials and Design, 107 (IF-4.364). pp. 65-73.

Rajshekhar, Y and Alex, T C and Sahoo, D P and Babu, G A and Balakrishnan, V and Venugopalan, T and Kumar, Sanjay (2016) Iron ore slime as an alternate coolant in steelmaking: Performance evaluation at commercial scale. Journal Of Cleaner Production, 139 (IF- 5.715). pp. 886-893.

Pal, J and Ghorai, S and Nandi, B and Chakaborty, T and Das, Goutam and Venugopalan, T (2015) Effect of pyroxenite and olivine minerals as source of MgO in hematite pellet on improvement of metallurgical properties. Journal of Central South University, 22(9) . pp. 3302-3310.

Pal, J and Venugopalan, T (2015) Carbon as in situ energy source in induration of hematite pellets and its effect on pellet properties. Ironmaking and Steelmaking, 42 (IF-0.553). pp. 139-147.

Paswan, Dayanand and Minj, R K and Singh, S D and Vaish, A K and Ghorai, S and Malathi, M and Mehta, K D and Prasad, S and Venugopalan, T (2014) Exploitation of banded hematite quartzite and Jhama coal for the production of higher grade ferro-silicon. IIM Metal News, 17(4) . pp. 23-28.

Pal, J and Ghorai, S and Goswami, M C and Prakash, S and Venugopalan, T (2014) Development of Pellet-Sinter Composite Agglomerate for Blast Furnace. ISIJ International, vol 54 (IF-1.069). pp. 620-627.

Pal, J and Chelladurai, Arunkumar and Yamuzala, Rajshekhar and Das, Goutam and Goswami, M C and Venugopalan, T (2014) Development on Iron Ore Pelletization Using Calcined Lime and MgO Combined Flux Replacing Limestone and Bentonite. ISIJ International, 54 (IF-1.69). pp. 2169-2178.

Venugopalan, T and Misra, S and Srikanth, S and Tarafder, S (2013) Preface. Transactions of Indian Institute of Metals, 66(5-6) Special Issue: SI (IF-0.215). p. 445.

Singh, D D N and Venugopalan, T (2013) Understanding the Corrosion and Remedial Measures to Control the Deterioration of Reinforcement Steel Bars by Modification in Their Chemistry and Application of Surface Coatings. Transactions of the Indian Institute of Metals, 66(5-6) (IF-0.215). pp. 677-687.

Palit Sagar, S and Murthy, G V S and Das, T K and Prakash, Amit and Goel, U S and Venugopalan, T (2013) Surface Wave Based Ultrasonic Technique for finding the Optimal Grinding Condition of High Speed Steel (HSS) Work Rolls. Steel Research International, 84(2) . pp. 163-168.

Conference or Workshop Item

Venugopalan, T and Palit Sagar, S (2011) Need of Improved Non-Destructive Technique for the Surface Condition Monitoring of High Speed Steel (HSS) Work Rolls. In: NDESAI-2011, December 2-3, 2011, Tata Steel, Jamshedpur, India.

Raghu Kumar, C and Tripathy, Sunil Kumar and Mohanan, Srijith and Venugopalan, T and Suresh, N (2010) Evaluation of floatex density separator performance using silica sand. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Patent

1423/KOL/2011 Dt. 4.11 .2011 (2011) An improved ultrasonic inspection system for surface and sub-surface crack detection of HSS Rolls - Application No.1423/KOL/2011 Dt. 4.11 .2011. Patent Ref.No : PAT-0386/2011/India .

Project Reports

Pal, J and Venugopalan, T and Ghorai, S and Goswami, M C and Prakash, S and Konar, J and Singh, D P (2013) Studies on pellet-sinter composite agglomeration for blast furnace ironmaking. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted)