Items where Author is "Tripathy, S"

Article

Jena, P S M and Tripathy, S and Mahato, B and Paulose, N and Fernando, D.C and Sahu, J K (2023) Role of void nucleation at primary-gamma'/gamma interface on strain softening of nickel-base superalloy 720Li. Journal of Alloys and Compounds, 958 .

Sahu, V K and Tripathy, S and Chowdhury, S G and Mandal, G K (2023) On the Unified Interaction Parameter Formalism and Its Application in Critical Reassessment of Pearlitic Transformation in Fe-C-Mn System. Metallurgical and Materials Transactions A -Physical Metallurgy and Materials Science . pp. 3157-3185.

Pradhan, S K and Tripathy, S and Singh, Rajan and Murugaiyan, Premkumar and Roy, Debdas and Humane, M M and Chowdhury, S G (2022) On the grain boundary character evolution in non equiatomic high entropy alloy during hot rolling induced dynamic recrystallization. Journal of Alloys and Compounds, 922 .

Dutt, A K and Bansal, G K and Tripathy, S and Krishna, K Gopala and Srivastava, V C and Chowdhury, S G (2022) Optimization of Selective Laser Melting (SLM) Additive Manufacturing Process Parameters of 316L Austenitic Stainless Steel. Transactions of the Indian Institute of Metals .

Tripathy, S and Sahu, V K and Jene, P S M and Tarafder, Soumitra and Chowdhury, S G (2022) On the importance of local equilibria in alloy design criteria for bulk nano-pearlitic steels and ensuing mechanical properties. Materials Science and Engineering A- Structural Materials Properties Microstructure and Processing, 841 .

Panda, D and Tripathy, S and Sabat, R K and Suwas, S and Sahoo, S K (2022) An Investigation on the Correlation Between Microstructure, Texture, and Mechanical Properties of Mg and its Alloys. Journal of Materials Engineering and Performance, 31 . pp. 9183-9199.

Tripathy, S and Jena, P S M and Sahu, V K and Sarkar, S K and Ahlawat, S and Biswas, A and Mahato, B and Tarafder, Soumitra and Chowdhury, S G (2022) On the Competitive Substitutional Partitioning During Nano-pearlitic Transformation in Multicomponent Steels. Metallurgical and Materials Transactions A-Physical Metallurgical and Materials Science, 53(5) . pp. 1806-1820.

Bansal, G K and Tripathy, S and Chandan, A K and Rajinikanth, V and Ghosh, C and Srivastava, V C and Chowdhury, S G (2021) Influence of quenching strategy on phase transformation and mechanical properties of low alloy steel. Materials Science and Engineering: A, 826, article no. 141937 (5.23). pp. 1-15.

Kamaraj, A and Tripathy, S and Chalavadi, G and Sahoo, P P and Misra, Siddhartha (2021) Characterization and Assessment of Mold Flux for Continuous Casting of Liquid Steel Using an Inverse Mold Simulator. Steel Resarch International, online . p. 2100121.

Chandan, A K and Tripathy, S and Sen, B and Ghosh, M and Ghosh Chowdhury, S (2021) Temperature dependent deformation behavior and stacking fault energy of Fe40Mn40Co10Cr10 alloy. Scripta Materialia, 199 (IF-5.079). p. 113891.

Jena, P S M and Pradhan, S K and Tripathy, S and Mahato, B and Fernando, C and Paulose, N and Sahu, J K (2021) Evolution of geometrically necessary dislocation at the gamma-gamma ' interface and its effect on tensile deformation behaviour of disk super alloy. Materials Science & Engineering A-Structural materials properties microstructure & processing, 807 .

Tripathy, S and Chowdhury, S G (2021) On the through-process texture evolution assessment in grain oriented Fe-3 wt% Si steel produced by a novel directional inoculation technique. Scientific Reports, 11(1) .

Bansal, G K and Junior, L P and Ghosh, C and Rajnikanth, V and Tripathy, S and Srivastava, V C and Bhagat, A N and Chowdhury, S G (2020) Quench Temperature-Dependent Phase Transformations During Nonisothermal Partitioning. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials, 51(7) (IF-2.050). pp. 3410-3224.

Chandan, A K and Tripathy, S and Ghosh, M and Chowdhury, S G (2020) Evolution of Substructure of a Non-equiatomic FeMnCrCo High Entropy Alloy Deformed at Ambient Temperature (vol 50, pg 128, 2019). Metallurgical and Materials Transactions A-physical metallurgy and materials science, 51(3) (IF-2.050). p. 1438.

Singla, Rashmi and Tripathy, S and Das, S K (2019) An integrated phenomenological process model for prediction of oxygen pickup during open air tapping and pouring of liquid steel. Chemical Engineering Science, 203 . pp. 391-401.

Sahoo, Biraj K and Tripathy, S and Ghosh, M and Das, Swapan K and Das, Goutam (2019) Investigation of Premature Failure of a Coal-Fired Boiler Superheater Tube. Journal of Failure Analysis and Prevention, 19(3) . pp. 792-801.

Chandan, A K and Tripathy, S and Ghosh, M and Ghosh Chowdhury, S (2019) Evolution of Substructure of a Non-equiatomic FeMnCrCo High Entropy Alloy Deformed at Ambient Temperature. Metallurgical and Materials Transactions A, 50(11) (IF-1.985). pp. 5079-5090.

Tripathy, S and Gupta, G and Ghosh Chowdhury, S (2018) High Entropy Alloys: Criteria for Stable Structure. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, 49A/1 (IF- 1.874). pp. 7-17.

Sheikh, L and Sinha, S and Singhababu, Y N and Verma, V and Tripathy, S and Nayar, S (2018) Traversing the profile of biomimetically nanoengineered iron substituted hydroxyapatite:synthesis, characterization, property evaluation, and drug release modeling. RSC Advances, 8(35) (IF-3.049). pp. 19389-19401.

Ghosh, M and Bansal, Gourav and Chandan, A and Shah, Minal and Tripathy, S and Murugaiyan, Premkumar and Sahoo, Biraj and Mukherjee, K and Srivastava, V C and Ghosh Chowdhury, S (2017) Functionally Driven Steels: A Review. Steel Tech, 12(1) (NonSCI). pp. 13-36.

Sen, S and Chakraborty, N and Rana, P and Sahu, Ranjan K and Singh, S and Panda, A K and Tripathy, S and Pradhan, D K and Sen, A (2016) Effect of Ti doping on the structural, electrical and magnetic properties of GaFeO3. Journal of Materials Science: Materials in Electronics, 27(5) (IF-2.019). pp. 4647-4652.

Sheikh, Lubna and Tripathy, S and Nayar, S (2016) Biomimetic matrix mediated room temperature synthesis and characterization of nano-hydroxyapatite towards targeted drug delivery. Rsc Advance, 6(67) (IF-3.108). pp. 62556-62571.

Conference or Workshop Item

Kumar, Abhishek and Chalavadi, G and Hembram, Khelaram and Tripathy, S (2019) Study of dry coal beneficiation in an Air pulsated Stratifier. In: XIX International Coal Preparation Congress 2019, 2019, New Delhi.