Items where Author is "Tiwari, S K"

Article

Rao, A U and Tiwari, S K and Kharb, A S and Chawla, V and Dubey, Paritosh and Goyat, M S and Saxena, V and Chawla, A K (2023) Impact of sputtering gas on the microstructural, mechanical and wetting properties of vanadium nitride coatings. Physica Scripta, 98(12) .

Tiwari, S K and Rao, A U and Chawla, V and Dubey, Paritosh and Saxena, V and Chawla, A K and Avasthi, D K (2022) Synthesis and characterization of sputter-deposited Ni-rich Ni3Al hard coatings. Journal of Alloys and Compounds, 926 .

Singh, Charu and Tiwari, S K and Singh, Raghuvir (2021) Development of corrosion-resistant electroplating on AZ91 Mg alloy by employing air and water-stable eutectic based ionic liquid bath. Surface & Coatings Technology, 428 .

Mohanty, Ashok and Kumar, S and Tiwari, S K (2021) Assessment of N-(4H-1,2,4-triazol-4-yl)octanamide as hydrochloric acid corrosion inhibitor for mild steel. Materials Today Communications, 27 .

Singh, Swarnima and Tiwari, S K and Singh, Raghuvir (2020) Influence of laser scanning speed on nitrided Ti6Al4V surface. Surface Engineering, 36(12): Special Issue: Laser . pp. 1285-1293.

Singh, Charu and Tiwari, S K and Singh, R (2019) Effect of carbonate and phosphate conversion pretreatments and optimization on corrosion behaviour of subsequent electroless nickel coating on AZ91 alloy. Applied Surface Science, 483 . pp. 334-354.

Singh, Charu and Tiwari, S K and Singh, R (2019) Exploring environment friendly nickel electrodeposition on AZ91 magnesium alloy: Effect of prior surface treatments and temperature of the bath on corrosion behaviour. Corrosion Science, 151 . pp. 1-19.

Singh, Charu and Tiwari, S K and Singh, R (2018) Deposition and characterization of electroless Ni on fluoride free pretreated AZ91 magnesium alloy. Materials Today-Proceedings, 5(9) (IF-0.837). pp. 17312-17319.

Singh, Charu and Tiwari, S K and Singh, R (2018) Deposition and characterization of electroless Ni on fluoride free pretreated AZ91 magnesium alloy. Materials Today-Proceedings, 5(9) (IF-0.837). pp. 17312-17319.

Singh, Charu and Meena, L K and Tiwari, S K and Singh, Raghuvir (2018) Establishing Environment Friendly Surface Treatment for AZ91 Magnesium Alloy for Subsequent Electroless Nickel Plating. Journal of The Electrochemical Society (JES), 165(2) (IF-3.259). C71-C85.

Mishra, Suman K and Kumar, V and Tiwari, S K and Mishra, T and Angula, G and Adhikari, S (2016) Development and degradation behavior of protective multilayer coatings for aluminum reflectors for solar thermal applications. Thin Solid Films, 619 (IF- 1.879). pp. 202-207.

Singh, R and Tiwari, S K (2016) Corrosion and Tribological Behavior of Laser Processed 13Cr-4Ni and AISI 304 Stainless Steels. Lasers in Engineering, 35(1-4) (IF-0.214). pp. 63-74.

Singh, Raghuvir and Kumar, Damodar and Mishra, Suman K and Tiwari, S K (2014) Laser cladding of Stellite 6 on stainless steel to enhance solid particle erosion and cavitation resistance. Surface and Coatings Technology, 251 (IF-2.199). pp. 87-97.

Tiwari, S K and Tripathi, Manju and Singh, Raghuvir (2013) Influence of SiO, Substitution on Corrosion Behavior of Sol-gel TiO,Coating on Mild Steel. IIM Metal News, 16(5) . pp. 1-4.

Tiwari, S K and Choubey, Pankaj K and Mahapatra, S P (2013) Bound rubber properties of chlorobutyl elastomer nanocomposites: effect of carbon nanotube and storage time. Journal of Metallurgy and Materials Science, 55(3) (Non-SCI). pp. 187-193.

Mohanty, Ashok and Tiwari, S K and Mishra, T and Chakravarty, S (2012) Making the Glitter Last – Development of A Novel Lacquer for Copper Based Alloys. Science & Culture, 78 (11-12) . pp. 550-552.

Singh, Raghuvir and Tiwari, S K and Mishra, Suman K (2012) Cavitation Erosion in Hydraulic Turbine Components and Mitigation by Coatings: Current Status and Future Needs. Journal of Materials Engineering and Performance, 21 (7). pp. 1539-1551.

Tiwari, S K and Choubey, Pankaj K and Mahapatra, S P (2012) Chlorobutyl elastomer-multiwalled carbon nanotube nanocomposites as effective barrier materials. Journal of Metallurgy and Materials Science, 54(4) . pp. 279-289.

Singh, Raghuvir and Tiwari, S K and Mishra, Suman K (2012) Cladding of tungsten carbide and stellite using high power diode laser to improve the surface properties of stainless steel. Advanced Materials Research, 585 . pp. 498-501.

Tiwari, S K and Tripathi, Manju and Singh, Raghuvir (2012) Electrochemical behavior of zirconia based coatings on mild steel prepared by sol-gel method. Corrosion Science, 63 . pp. 334-341.

Tiwari, S K and Sahu, Ranjan K and Pramanick, A K and Singh, Raghuvir (2011) Development of conversion coating on mild steel prior to sol gel nanostructured Al2O3 coating for enhancement of corrosion resistance. Surface and Coatings Technology, 205 . pp. 4960-4967.

Singh, Raghuvir and Tiwari, S K and Mishra, Suman K and Dahotre, N B (2011) Electrochemical and mechanical behavior of laser processed Ti–6Al–4V surface in Ringer’s physiological solution. Journal of Materials Science: Materials in Medicine, 22 . pp. 1787-1796.

Singh, R N and Awasthi, R and Tiwari, S K (2010) Electro-Catalytic Activities of Binary Nano-Composites of Pt and NanoCarbon/Multiwall Carbon Nanotube for Methanol Electro-Oxidation. The Open Catalysis Journal, 3 (1876-214X/10). pp. 50-57.

Singh, R N and Madhu, and Awasthi, R and Tiwari, S K (2009) Iron molybdates as electrocatalysts for O2 evolution reaction in alkaline solutions. International Journal of Hydrogen Energy, 34 (11). pp. 4693-4700.

Tiwari, S K and Adhikary, Jhuma and Singh, T B and Singh, Raghuvir (2009) Preparation and characterization of sol–gel derived yttria doped zirconia coatings on AISI 316L. Thin Solid Films, 517 (16). pp. 4502-4508.

Singh, R N and Sharma, T and Singh, A and Anindita, and Mishra, D and Tiwari, S K (2008) Perovskite-type La2−xSrxNiO4 (0 ≤ x ≤ 1) as active anode materials for methanol oxidation in alkaline solutions. Electrochimica Acta, 53 (5). pp. 2322-2330.

Alphonsa, J and Sinha, G and Kumar, A and Jhala, G and Tiwari, S K and Gupta, S and Rayjada, P A and Chauhan, N and Raole, P M and Mukherjee, S (2008) Effect of frequency on the properties of plasma nitrided AISI 4340 steel. Journal of Metallurgy and Materials Science, 50 (2). pp. 119-125.

Singh, R N and Singh, A and Mishra, D and Tiwari, S K and Gunjan, M K (2008) Influence of substitution of Ru on the electrocatalytic properties of the perovskite-type LaSrNiO4 electrode towards methanol oxidation. Indian Journal Of Chemistry Section A-Inorganic Bio-Inorganic Physical Theoretical & Analytical Chemistry , 47 (8). pp. 1187-1193.

Singh, Raghuvir and Ghosh Chowdhury, S and Tiwari, S K and Dahotre, N B (2008) Laser surface processing of Ti6Al4V in gaseous nitrogen: corrosion performance in physiological solution. Journal of Materials Science: Materials in Medicine, 19 (3). pp. 1363-1369.

Tiwari, S K and Mishra, T and Gunjan, M K and Bhattacharyya, A S and Singh, T B and Singh, Raghuvir (2007) Development and characterization of sol–gel silica–alumina composite coatings on AISI 316L for implant applications. Surface and Coatings Technology, 201 (16-17). pp. 7582-7588.

Mishra, T and Tiwari, S K (2006) Studies on sorption properties of zeolite derived from Indian fly ash. Journal of Hazardous Materials, 137 (1). pp. 299-303.

Alphonsa, J and Tiwari, S K and Jhala, G and Rayjada, P A and Raole, P M and Mukherji, S (2005) Influence of alloying elements on the corrosion properties of steels during plasma nitriding process. Journal of Metallurgy and Materials Science, 47 (1). pp. 31-38.

Mishra, T and Tiwari, S K and Das, N N and Mahato, B (2003) Synthesis and sorption properties of 13X zeolite derived from coal fly ash. Journal of Metallurgy and materials Science, 45 (4). pp. 193-198.

Conference or Workshop Item

Tiwari, S K and Singh, Raghuvir (2012) Ceramic coatings by sol-gel method for corrosion protection of mild steel. In: National Congress on Corrosion Control, 23 – 25 August 2012, Kolkata.

Project Reports

Tarafder, Mita and Hansda, K L and Pal, S K and Kumari, Beena and Upadhyay, A and Sudhakar, K G and Sahu, K L and Tiwari, S K and Mandal, Gopi and Kumar, Rajneesh and Usha, Yenni and Rath, R K and Director, NML (2020) CSIR Integrated Skill Initiative. Training Report (TR). CSIR-NML, Jamshedpur, Jamshedpur.

Kumar, Sunil and Tiwari, S K (2012) Multilayer Alloy Coating on Mild Steel for Corrosion Resistance. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Sarode, Anurag and Tiwari, S K (2011) Electrochemical study of organic and inorganic hybrid coatings on Al-7075 (STR). Training Report (TR). NML, Jamshedpur. (Submitted)

Acharya, Bishnu Prasad and Tiwari, S K (2011) Electrochemical study of organic and inorganic hybrid coatings on Al-7075 (STR). Training Report (TR). NML, Jamshedpur. (Submitted)

Singh, T B and Bhattamishra, A K and Tiwari, S K and Singh, Raghuvir and Bhattacharjee, S (2007) Enhancement of Surface properties of Metal substrates by Electroless Nickel Coating. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Tiwari, S K and Singh, Raghuvir and Mishra, T and Das, Swapan K (2006) Sol-Gel Coatings on 316L for Surface properties Enhancement. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Tiwari, S K and Mishra, T (2006) Studies on corrosion, physical and chemical properties of CRS bars for their use in Narmada Project Canal. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)