Items where Author is "Swaminathan, J"

Article

Swaminathan, J and Singh, Raghuvir and Gunjan, M K and Mahato, B (2011) Sensitization induced stress corrosion failure of AISI 347 stainless steel fractionator furnace tubes. Engineering Failure Analysis, 18 (8). pp. 2211-2221.

Singh, Raghuvir and Swaminathan, J and Paswan, S and Rajinikanth, V and Chattoraj, I (2011) Investigations on high temperature corrosion of wire enameling oven. Engineering Failure Analysis, 18 (5). pp. 1375-1387.

Sahu, J K and Das, D K and Nandy, T K and Mandal, D and Rajinikanth, V and Swaminathan, J and Ray, Ashok K (2011) Effect of titanium aluminide coating on cyclic plastic deformation and fatigue life of a titanium alloy at 600 °C. Materials Science and Engineering A, 530 . pp. 664-668.

Mohapatra, J N and Swaminathan, J and Ghosh, M K and Mitra, A (2010) Magnetic Nondestructive Evaluation of Creep Behavior in Water-Quenched Modified 9Cr-1Mo Steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 41A (4). pp. 900-905.

Srinivasan, A and Swaminathan, J and Gunjan, M K and Pillai, U T S and Pal, B C (2010) Effect of intermetallic phases on the creep behavior of AZ91 magnesium alloy. Materials Science and Engineering: A, 527 (6). pp. 1395-1403.

Swaminathan, J and Singh, Raghuvir and Gunjan, M K and Chattoraj, I (2009) Failure analysis of air pre-heater tubes of a petrochemicals plant. Engineering Failure Analysis, 16 (7). pp. 2371-2381.

Ray, Ashok K and Guguloth, K and Swaminathan, J and Bose, S C and Roy, Nilima and Tiwari, Y N and Roy, P K and Alam, Z and Sharma, VSRA and Joshi, Srikanth V and Venkataraman, B and Das, D K (2009) Damage Resistance of a Thermal Barrier Coated Superalloy Used in Aero Turbine Blade under Accelerated Creep Condition. High Temperature Materials And Processes, 28 (1-2). pp. 35-53.

Mohapatra, J N and Ray, Ashok K and Swaminathan, J and Mitra, A (2008) Creep behaviour study of virgin and service exposed 5Cr–0.5Mo steel using magnetic Barkhausen emissions technique. Journal of Magnetism and Magnetic Materials, 320 (18). pp. 2284-2290.

Swaminathan, J and Prasad, Prabha and Gunjan, M K and Guguloth, K and Roy, P K and Singh, Raghubir and Ghosh, R N (2008) Mechanical strength and microstructural observations for remaining life assessment of service exposed 24Ni–24Cr–1.5Nb cast austenitic steel reformer tubes. Engineering Failure Analysis , 15 (6). pp. 723-735.

Srinivasan, A and Swaminathan, J and Pillai, U T S and Guguloth, K and Pal, B C (2008) Effect of combined addition of Si and Sb on the microstructure and creep properties of AZ91 magnesium alloy. Materials Science and Engineering A, 485 (1-2). pp. 86-91.

Swaminathan, J and Guguloth, K and Gunjan, M K and Roy, P K and Ghosh, R N (2008) Failure analysis and remaining life assessment of service exposed primary reformer heater tubes. Engineering Failure Analysis, 15 (4). pp. 311-331.

Mitra, A and Mohapatra, J N and Swaminathan, J and Ghosh, M and Panda, A K and Ghosh, R N (2007) Magnetic evaluation of creep in modified 9Cr–1Mo steel. Scripta Materialia, 57 (9). pp. 813-816.

Srinivasan, A and Ghosh Chowdhury, S and Srivastava, V C and Swaminathan, J and Poddar, Palash and De, P K (2007) Microstructural and textural evolution during large strain hot rolling (LSR) of Mg–Al (AZ31) alloy. Materials Science and Technology, 23 (11). pp. 1313-1320.

Ray, Ashok K and Goswami, B and Singh, M P and Das, D K and Roy, Nilima and Ravi Kumar, B and Dash, Byomkesh and Ray, Ajoy K and Das, Goutam and Rupa, P K P and Parida, N and Das, Arpan and Swaminathan, J and Dwarakadasa, E S (2006) Characterization of bond coat in a thermal barrier coated superalloy used in combustor liners of aero engines. Materials Characterization, 57 (3). pp. 199-209.

Srinivasan, A and Pillai, U T S and Swaminathan, J and Das, Swapan K and Pal, B C (2006) Observations of microstructural refinement in Mg–Al–Si alloys containing strontium. Journal of Materials Science, 41 (18). pp. 6087-6089.

Humane, M M and Vaish, A K and Swaminathan, J and Ravi Kumar, B and De, P K and Peshwe, D R and Paretkar, R K (2006) Comparison of hot rolled textures in different grades of high formable steels. Steel Research International, 77 (6). pp. 445-449.

Ray, Ashok K and Singh, S R and Swaminathan, J and Roy, P K and Tiwari, Y N and Bose, S C and Ghosh, R N (2006) Structure property correlation study of a service exposed first stage turbine blade in a power plant. Materials Science and Engineering A, 419 (1-2). pp. 225-232.

Srinivasan, A and Pillai, U T S and Swaminathan, J and Pai, B C (2006) Enhanced high temperature properties of low pressure cast AZ91 Mg alloy. International Journal of Cast Metals Research, The, 19 (5). pp. 265-268.

Singh, Raghuvir and Swaminathan, J and Das, Swapan K and Ravi Kumar, B and Chattoraj, I (2005) Effects of Cold Deformation Prior to Sensitization on Intergranular Stress Corrosion Cracking of Stainless Steel. Corrosion, 61 (9). pp. 907-916.

Sundaresan, S and Albert, S K and Sireesha, M and Swaminathan, J and Kamaraj, M (2005) Stress rutpure behavior of transition joints between modified Kr-Mo steel and 316 L(N) SS. Transactions Of The Indian Institute Of Metals , 58 (2-3). pp. 493-499.

Bose, S C and Singh, K and Swaminathan, J and Sarma, D S (2004) Prediction of creep life of X10CrMoVNbN-91 (P-91) steel through short term stress relaxation test methodology. Materials Science and Technology, 20 (10). pp. 1290-1296.

Ray, Ashok K and Sinha, S K and Tiwari, Y N and Swaminathan, J (2003) Analysis of failed reformer tubes. Engineering Failure Analysis, 10 (3). pp. 351-362.

Sivaprasad, S and Swaminathan, J and Tiwari, Y N and Roy, P K and Singh, Raghubir (2003) Remaining life assessment of service exposed reactor and distillation column materials of a petrochemical plant. Engineering Failure Analysis, 10 (3). pp. 275-289.

Book or NML Publication

Sahu, J K and Swaminathan, J and Sivaprasad, S and Ray, Ajoy K and Tarafder, S and Chaudhuri, S and Ghosh, R N (2008) Use of expert system software for life monitoring of power plant components. In: Remaining Life Assessment of aged Components in Thermal Power Plants & Petrochemical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 169-181. ISBN 81-87053-73-1

Conference or Workshop Item

Swaminathan, J and Singh, Raghubir and Das, Swapan K and Das, Goutam (2006) Failure Analysis of Welded Reformer Tubes of a Fertilizer Unit. In: Proceeding of the International Conference & Exhibition on Pressure Vessels and Piping, 7-9, February 2006, Chennai.

Ray, Ashok K and Tiwari, Y N and Sahu, J K and Swaminathan, J and Roy, P K and Sinha, S K and Das, Goutam and Ghosh Chowdhury, S and Kumar, P and Chaudhuri, S (2001) Effect of Oxide Scale Deposition on the Residual Life of Service Exposed Reheater Tubes in Boiler of a Thermal Power Plant. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.