Items where Author is "Sahu, K K"

Article

Kiran, U R and Panchal, A and Kamal, S S K and Sahu, K K and Mishra, D and Nandy, T K and Nagesh, Ch R V S (2023) Microstructure and Mechanical Properties of Tungsten Heavy Alloy Prepared Using Tungsten Metal Powder Produced from Heavy Alloy Scrap. Defence Science Journal, 73(2) . pp. 240-250.

Sinha, Shivendra and De, S and Mishra, D and Shekhar, S and Agarwal, A and Sahu, K K (2022) Phosphonomethyl iminodiacetic acid functionalized metal organic framework supported PAN composite beads for selective removal of La(III) from wastewater: Adsorptive performance and column separation studies. Journal of Hazardous Materials, 425 .

Shekhar, Saurabh and Kumari, V and Sinha, S and Mishra, D and Agarwal, A and Sahu, K K (2022) Petro-Mineralogical and Geochemical Evaluation of Glauconitic Rocks of the Ukra Member (Bhuj Formation), Kutch Basin, India. Clays and Clay Minerals, 70(1) . pp. 135-153.

Karmaker, P and Mishra, D and Sahu, K K and Agarwal, A (2022) Selective Separation of Iron and Cobalt from Leached Tungsten Carbide Scrap by Solvent Extraction. Journal of Sustainability Metallurgy .

Shekhar, Saurabh and Sinha, S and Mishra, D and Agrawal, A and Sahu, K K (2020) A sustainable process for recovery of potash fertilizer from glauconite through simultaneous production of pigment grade red oxide. Sustainable Materials and Technologies, 23 (IF-4.375). e00129.

Singh, Ranjeet K and Kishore, R and Sahu, K K and Chalavadi, G and Singh, R (2020) Estimation of the Fluid Velocity Profile in the Stratification Zone of a Falcon Concentrator. Mining, Metallurgy & Exploration , 37(1) (IF-0.784 ). pp. 321-331.

Sinha, Shivendra and Choudhary, R and Mishra, D and Shekhar, Saurabh and Agrawal, A and Sahu, K K (2020) Valorisation of waste galvanizing dross: Emphasis on recovery of zinc with zero effluent strategy. Journal of Environmental Management, 256 (IF-4.865). p. 109985.

Kumari, Aarti and Sahu, K K and Sahu, S K (2019) Solvent Extraction and Separation of Nd, Pr and Dy from Leach Liquor of Waste NdFeB Magnet Using the Nitrate Form of Mextral (R) 336At in the Presence of Aquo-Complexing Agent EDTA. Metals, 9(2) . pp. 1-16.

Singh, R K and Sahu, K K and Chalavadi, G and Singh, Ratnakar and Padmanabhan, N P H (2019) Separation characteristics of centrifugal fluidized separator using binary density system. Mineral Processing and Extractive Metallurgy Review . pp. 1-8.

Sinha, Shivendra and Mishra, D and Agrawal, A and Sahu, K K (2018) Aqueous process intensification through enhanced oxygen mass transfer using oxygen vector: An application to cleaner leaching. Journal of Cleaner Production, 176 (IF-5.715). pp. 452-462.

Mishra, D and Sahu, K K and Agrawal, A (2018) Process integration for material synthesis from a deactivated catalyst: Studies on the interaction of metal ions between two immiscible phases. Journal of Hazardous Materials, 344 (IF-6.434). pp. 169-178.

Shekhar, Saurabh and Mishra, D and Agrawal, A and Sahu, K K (2017) Physical and chemical characterization and recovery of potash fertilizer from glauconitic clay for agricultural application. Applied Clay Science, 143 (IF-3.101). pp. 50-56.

Shekhar, Saurabh and Mishra, D and Agrawal, A and Sahu, K K (2017) Physico-chemical treatment of glauconitic sandstone to recover potash and magnetite. Journal of Cleaner Production, 147 (IF-5.715). pp. 681-693.

Mishra, D and Sinha, S and Sahu, K K and Agrawal, A and Kumar, R (2017) Recycling of Secondary Tungsten Resources. Transactions of the Indian Institute of Metals, 70(2) (IF-0.533). pp. 479-485.

Agrawal, A and Mishra, D and Sahu, K K (2016) Comparative performance assessment of solvents for the extraction of H2SO4 from spent electrolytic bleed stream of copper industry. Journal of Molecular Liquids, 220 (IF-3.648). pp. 82-91.

Gostu , S and Mishra, D and Sahu, K K and Agrawal, A (2014) Precipitation and characterization of zinc borates from hydrometallurgical processing of zinc ash. Materials Letters, 134 (IF-2.269). pp. 198-201.

Sahu, K K and Agrawal, A and Mishra, D (2013) Hazardous waste to materials : Recovery of molybdenum and vanadium from acidic leach liquor of spent hydroprocessing catalyst using alamine 308. Journal of Environmental Management, 125 (IF-3.057). pp. 68-73.

Singhbabu, Y N and Sahu, K K and Dadhich, D and Pramanick, A K and Mishra, T and Sahu, Ranjan K (2013) Capsule-embedded reduced graphene oxide: synthesis, mechanism and electrical properties. Journal of Materials Chemistry, 1 (IF-5.97). pp. 958-966.

Sahu, J K and Sahu, K K and Ray, A K (2012) The influence of high-temperature oxidation resistant titanium aluminide coating on low-cycle fatigue behaviour of titanium alloy IMI 834 at 600 C. Institute of Mechanical Engineers, 226 . pp. 35-41.

Agrawal, A and Kumari, S and Parveen, M and Sahu, K K (2012) Exploitation of Copper Bleed Stream for the Extraction and Recovery of Copper and Nickel by Bis(2,4,4-trimethylpentyl)phosphinic Acid. Mineral Processing and Extractive Metallurgy Review: An International Journal, 33 (5). pp. 339-351.

Sahu, K K and Mishra, D and Jha, Manis K and Agrawal, A (2012) Processing of secondaries and wastes for metal extraction. Science and culture, 78 . pp. 504-510.

Agrawal, A and Kumari, S and Sahu, K K (2011) Studies on solvent extraction of iron(III) as a step for conversion of a waste effluent to a value added product. Journal of Environmental Management, 92 (12). pp. 3105-3111.

Mishra, D and Srivastava, R R and Sahu, K K and Singh, T B and Jana, R K (2011) Leaching of roast-reduced manganese nodules in NH3 – (NH4)2CO3 medium. Hydrometallurgy, 109 (3-4). pp. 215-220.

Sahu, J K and Sahu, K K and Ray, Ashok K (2011) The influence of high-temperature oxidation resistant titanium aluminide coating on low-cycle fatigue behaviour of titanium alloy IMI 834 at 600°C. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, October 31, 2011 1464420711425133, 226 (L1). pp. 34-41.

Agrawal, A and Sahu, K K (2010) Problems, prospects and current trends of copper recycling in India: An overview. Resources, Conservation and Recycling, 54 (7). pp. 401-416.

Agrawal, A and Sahu, K K (2010) Treatment of Chloride Waste Pickle Liquor by Solvent Extraction for the Recovery of Iron. Mineral Processing and Extractive Metallurgy Review, 31 (3). pp. 121-134.

Agrawal, A and Sahu, K K (2009) An overview of the recovery of acid from spent acidic solutions from steel and electroplating industries. Journal of Hazardous Materials, 171 (1-3). pp. 61-75.

Agrawal, A and Sahu, K K (2009) Value Addition to Sulfate Waste Pickle Liquor of Steel Industry Using Hydrometallurgical Processes. Metallurgical and Materials Transactions B, 40 (6). pp. 877-885.

Agrawal, A and Kumari, S and Sahu, K K (2009) Iron and copper recovery/removal from industrial wastes: A review. Industrial & Engineering Chemistry Research, 48 (13). pp. 6145-6161.

Sahu, K K and Mishra, D and Ghosh, S and Jana, R K and Agrawal, A (2009) Selective dissolution of chalcopyrite in chloride media. Journal of Metallurgy and Materials Science, 51 (3). pp. 215-233.

Agrawal, A and Pal, C and Sahu, K K (2008) Extractive removal of chromium (VI) from industrial waste solution. Journal of Hazardous Materials, 159 (2-3). pp. 458-464.

Agrawal, A and Kumari, S and Sahu, K K (2008) Liquid–liquid extraction of sulphuric acid from zinc bleed stream. Hydrometallurgy, 92 (1-2). pp. 42-47.

Sahu, K K and Agrawal, A (2008) Environmental friendly recycling of electronic waste – A challenge before developing nations. Journal of Metallurgy and Materials Science, 50 (2). pp. 107-118.

Mishra, D and Kanari, N and Sahu, K K and Gaballah, I (2008) Recovery of zinc and lead from electric arc furnace dusts through the oxy – chlorination route. Metal Materials & Processes, 20 (2). pp. 161-172.

Agrawal, A and Kumari, S and Ray, B C and Sahu, K K (2007) Extraction of acid and iron values from sulphate waste pickle liquor of a steel industry by solvent extraction route. Hydrometallurgy, 88 (1-4). pp. 58-66.

Agrawal, A and Sahu, K K (2006) Kinetic and isotherm studies of cadmium adsorption on manganese nodule residue. Journal of Hazardous Materials, 137 (2). pp. 915-924.

Sahu, S K and Sahu, K K and Pandey, B D (2006) Leaching of zinc sulfide concentrate from the ganesh-himal deposit of nepal. Metallurgical and Materials Transactions B, 37 (4). pp. 541-549.

Agrawal, A and Sahu, K K (2006) Separation and recovery of lead from a mixture of some heavy metals using Amberlite IRC 718 chelating resin. Journal of Hazardous Materials, 133 (1-3). pp. 299-303.

Agrawal, A and Kumar, Vinay and Pandey, B D and Sahu, K K (2006) A comprehensive review on the hydro metallurgical process for the production of nickel and copper powders by hydrogen reduction. Materials Research Bulletin, 41 (4). pp. 879-892.

Nayar, S and Pramanick, A K and Sharma, Binay Kumar and Mishra, Rahul Kumar and Bansal, Satyendra Kumar and Prajapati, Amardeep and Sahu, K K and Das, Swapan K and Pathak, L C and Sinha, Arvind (2006) Hydroxyapatite coating on stainless steel pre-coated with bovine serum albumin at ambient conditions. Colloids and Surfaces B: Biointerfaces, 48 (2). pp. 183-187.

Sahu, K K and Alex, T C and Mishra, D and Agrawal, A (2006) An overview on the production of pigment grade titania from titania-rich slag. Waste Management & Research, 24 (1). pp. 74-79.

Sahu, K K and Agrawal, A and Pandey, B D (2005) Nickel recovery from spent nickel catalyst. Waste Management & Research, 23 (2). pp. 148-154.

Agrawal, A and Sahu, K K (2005) Influence of temperature on the exchange of alkaline earth and transition metals on iminodiacetate resin. Solvent Extraction and Ion Exchange, 23 (2). pp. 265-287.

Agrawal, A and Sahu, K K and Pandey, B D (2005) Systematic studies on adsorption of lead on sea nodule residues. Journal of Colloid and Interface Science, 281 (2). pp. 291-298.

Agrawal, A and Sahu, K K (2005) Potential utilisation of manganese nodule leach residue as a scavenger for cadmium from industrial effluents. Journal of Metallurgy and Materials Science, 47 (3). pp. 141-148.

Agrawal, A and Sahu, K K and Pandey, B D (2004) A Comparative adsorption study of copper on various industrial solid wastes. AIChE Journal, 50 (10). pp. 2430-2438.

Agrawal, A and Sahu, K K and Pandey, B D (2004) Solid waste management in non-ferrous industries in India. Resources, Conservation and Recycling, 42 (2). pp. 99-120.

Agrawal, A and Sahu, K K and Pandey, B D (2004) Recent trends and current practices for secondary processing of zinc and lead. Part I: lead recovery from secondary sources. Waste Management & Research, 22 (4). pp. 240-247.

Sahu, K K and Agrawal, A and Pandey, B D (2004) Recent trends and current practices for secondary processing of zinc and lead. Part II: zinc recovery from secondary sources. Waste Management & Research, 22 (4). pp. 248-254.

Babu, M Nani and Sahu, K K and Pandey, B D and Mankhand, T R (2004) Kinetics of leaching of zinc from sphalerite concentrate with sodium persulphate. Canadian Metallurgical Quarterly , 43 (3). pp. 321-328.

Agrawal, A and Sahu, K K and Pandey, B D (2004) Separation and removal of cobalt and zinc from chloride solution by Indion BSR - A chelating resin. Separation Science and Technology, 39 (10). pp. 2373-2388.

Agrawal, A and Sahu, K K and Pandey, B D (2004) Removal of zinc from aqueous solutions using sea nodule residue. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 237 (1-3). pp. 133-140.

Agrawal, A and Sahu, K K (2004) Adsorption kinetics for the removal of Co(II) and Zn(II) from wastewater by indion BSR - a chelating ion-exchange resin. Adsorption Science & Technology , 22 (2). pp. 107-118.

Agrawal, A and Sahu, K K and Rawat, J P (2003) Kinetic studies on the exchange of bivalent metal ions on amberlite IRC-718-an iminodiacetate resin. Solvent Extraction and Ion Exchange, 21 (5). pp. 763-782.

Babu, M Nani and Sahu, K K and Pandey, B D (2002) Zinc recovery from sphalerite concentrate by direct oxidative leaching with ammonium, sodium and potassium persulphates. Hydrometallurgy, 64 (2). pp. 119-129.

Rath, C and Anand, S and Das, R P and Sahu, K K and Kulkarni, S D and Date, S K and Mishra, N C (2002) Dependence on cation distribution of particle size, lattice parameter, and magnetic properties in nanosize Mn-Zn ferrite. Journal of Applied Physics, 91 (4). pp. 2211-2215.

Upadhyay, C and Verma, H C and Rath, C and Sahu, K K and Anand, S and Das, R P and Mishra, N C (2001) Mössbauer studies of nanosize Mn1−xZnxFe2O4. Journal of Alloys and Compounds, 326(1-2) . pp. 94-97.

Sahu, K K and Das, R P (2000) Mixed solvent systems for the extraction and stripping of iron(III) from concentrated acid chloride solutions. Metallurgical and Materials Transactions B, 31 (6). pp. 1169-1174.

Rath, C and Mishra, N C and Anand, S and Das, R P and Sahu, K K and Upadhyay, C and Verma, H C (2000) Appearance of superparamagnetism on heating nanosize Mn0.65Zn0.35Fe2O4. Applied Physics Letters, 76 (IF-4.00). pp. 475-477.

Pathak, P N and Dey, Shobhana and Rao, D S and Sahu, K K and Chaterjee, N N (2000) Recycling: An alternative to disposal -A case study on ferro-chrome slag. Journal of Metallurgy and materials Science, 42 (4). pp. 249-253.

Rath, C and Sahu, K K and Kulkarni, S D and Anand, S and Date, S K and Das, R P and Mitra, N C (1999) Microstructure-dependent coercivity in monodispersed hematite particles. Applied Physics Letters, 75 (26). pp. 4171-4173.

Book or NML Publication

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Mineral Processing and Nonferrous Extractive Metallurgy. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy. National Metallurgical Laboratory, Jamshedpur, Jamshedpur.

Conference or Workshop Item

Agarwal, Sanjay and Sahu, K K and Godiwalla, K M and Jana, R K (2012) Manganese distribution between alloy & slag phases in making Fe-Si-Mn alloy from polymetallic sea nodules. In: XXVI International Mineral Processing Congress (IMPC) 2012 Proceedings, September, 2012, New Delhi.

Agrawal, A and Perween, M and Pramanick, Shubhajit and Sahu, K K (2011) Recovery of copper from PCB leach solution by solvent extraction. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Agrawal, A and Pathak, Pankaj and Mishra, D and Sahu, K K (2011) Recovery of metal values from spent nickel-cadmium rechargeable batteries by solvent extraction route. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Agarwal, Sanjay and Sahu, K K and Godiwalla, K M and Jana, R K (2011) Studies on the Production of Ferro-Silico-Manganese Alloy in Arc Furnace from Polymetallic Sea Nodule. In: XII International Conference on Mineral Processing Technology (MPT-2011), 20-22 October, 2011, Udaipur, India.

Kushwaha, Jyoti and Agrawal, A and Upadhyay, A K and Mankhand, T R and Sahu, K K (2011) Recovery of Molybdenum from Spent HDs Catalyst Leach Liquor by Solvent Extraction using Aliquat 336. In: 15th International Conference on Non-ferrous Metals 2011, 8-9 July 2011, Kolkata, India.

Roy, Animesh and Srivastava, R R and Smita, K and Mishra, D and Agrawal, A and Hait, Jhumki and Sahu, K K (2010) Acid pressure dissolution of matte produced from the alloy obtained from direct smelting of sea nodules. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Smita, K and Srivastava, R R and Mishra, D and Sahu, K K and Singh, T B and Agrawal, A and Jana, R K (2010) Recovery of valuable metals from sea nodules through reduction-roasting ammonia leaching process. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Agarwal, Sanjay and Sahu, K K and Godiwalla, K M and Rajak, D K and Smita, K and Jana, R K (2010) An experimental and thermodynamic study on reduction smelting of sea nodules to recover valuable metals. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sahu, K K and Agarwal, Sanjay and Ojasvi, and Mishra, D and Agrawal, A and Konar, J and Minj, R K and Godiwalla, K M (2010) Removal of manganese and iron from the alloy obtained from direct smelting of sea nodules. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Agarwal, Sanjay and Sahu, K K and Jana, R K and Mehrotra, S P (2009) Recovery of Cu, Ni, Co and Mn from sea nodules by direct reduction smelting. In: Proceedings of the Eighth (2009) ISOPE Ocean Mining Symposium , 20-24 September 2009, Chennai, India.

Agarwal, Sanjay and Sahu, K K and Jana, R K and Mehrotra, S P (2009) Studies on recovery of Ni, Co & Cu from polymetallic sea nodules by direct reduction smelting. In: Pyrometallurgy of Nickel and Cobalt 2009, 23- 26 AUGUST 2009, SUDBURY, ONTARIO, Canada.

Randhawa, N S and Agarwal, Sanjay and Sahu, K K and Jana, R K (2009) Recovery of copper, nickel and cobalt from manganese nodules by Arc furnace smelting. In: International conference of Non-ferrous metals 2009, July 10-11, 2009, Bhubaneswar.

Sahu, K K and Agrawal, A (2008) Lead Zinc Extraction Processes. In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Sahu, K K and Agrawal, A (2008) Processing of Electronic Waste(E-Waste). In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh , Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Agglomeration. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Classification. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Comminution. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) De-Watering. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Electrostatic Seperation. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Froth Flotation. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Gravity Concentration. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Importance of Mineralogy in Mineral Processing. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Magnetic Separation. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Material Balance, Plant Evaluation and Modeling. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Principles of Extractive Metallurgy. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Sahu, K K and Agarwal, Anup (2008) Recycling of Metals from Secondary Sources Treatment Options. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Agrawal, A and Sahu, K K (2005) Detoxification of cadmium from industrial effluents using solid waste generated after sea nodule processing. In: Proceedings of the Sixth (2005) ISOPE Ocean Mining Symposium, 2005, ISOPE Ocean Mining Symposium.

Sahu, K K (2002) Hydrothermal Synthesis and Microstructural Control of Hematite Particles. In: Proceedings of the Indo-Malaysian Joint Workshop(WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur.

Patent

EP2002000708620 (2006) Process for the recovery of nickel from spent catalyst. EP1488015B1.

US2002000095526 (2004) Process for recovery of nickel from spent catalyst. US6733564.

Project Reports

Mishra, D and Sahu, K K and Agrawal, A and Jana, R K (2010) Selective Reduction of Cu, Ni & Co from Aqueous Solutions through Hydrothermal Route for Production of Metal Powders. Collaborative (CLP). NML, NML, JSR. (Submitted)

Mishra, D and Kumar, Rakesh and Sahu, K K and Agrawal, A (2008) Development of Process for Production of Chemical Manganese Dioxide (OLP-0055). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Sahu, K K and Agrawal, A and Mishra, D and Mehrotra, S P (2007) Recovery of Molybdenum and Vanadium from spent Hydro-processing Catalyst. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)