Items where Author is "Sahoo, K L"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 88.

Article

Choudhary, C and Bar, H N and Arif, S M D and Sahoo, K L and Mandal, D (2023) Effect of Structural Refinement and Modification on the Mechanical Properties of Al-7Si Alloy. Journal of Materials Engineering and Performance .

Choudhary, C and Bar, H N and Pramanick, A K and Sahoo, K L and Mandal, D (2022) Effect of Strain Induced Melt Activation Process on the Microstructure and Mechanical Properties of Al-5Ti-1B Treated Al-7Si Alloy. Metals and Materials International .

Choudhary, C and Pramanick, A K and Sahoo, K L and Mandal, D (2022) Evaluation of microstructure and mechanical properties of M-SIMA processed Al-7Si alloy. Materials Science and Technology .

Choudhary, C and Sahoo, K L and Roy, Himadri and Mandal, D (2021) Effect of Grain Refiner on Microstructural Feature Influence Hardness and Tensile Properties of Al-7Si Alloy. Journal of Materials Engineering and Performance .

Chaudhary, C and Sahoo, K L and Mandal, D (2020) Processing and characterisation of modified strain-induced melt activation processed Al-Si alloys. Materials Science and Technology, 36(2) (IF-5.040). pp. 181-193.

Shah, Minal and Sahoo, K L and Das, Swapan K and Das, Goutam (2020) Wear Mechanism of High Chromium White Cast Iron and Its Microstructural Evolutions During the Comminution Process. Tribology Letters, 68(3) (IF-2.566).

Rao, R G and Ghosh, M and Ganguly, R I and Bose, S C and Sahoo, K L (2020) Mechanical properties and age hardening response of Al6061 alloy based composites reinforced with fly ash. Materials Science and Engineering A, 772 (IF-4.652). p. 138823.

Choudhary, C and Sahoo, K L and Mandal, D (2019) The Effect of Thermo-Mechanical Processing on the Microstructure and Mechanical Properties of Modified SIMA Treated Al-7Si Alloy. Light Metals . pp. 241-249.

Mandal, D and Murmu, Laxmi and Choudhury, C and Singh, Gaurav and Sahoo, K L (2019) Influence of alloying elements and grain refiner on microstructure, mechanical and wear properties of Mg-Al-Zn alloys. Canadian Metallurgical Quarterly, 58(2) . pp. 241-251.

Rojas, Jose I and Bathula, Venkata Siva and Sahoo, K L and Crespo, Daniel (2018) Viscoelastic behaviour of a novel aluminium metal matrix composite and comparison with pure aluminium,aluminum alloys and a composite made of Al-Mg-Si alloy reinforced with SiC particles. Journal of Alloys and Compounds, 744 (IF-3.133). pp. 445-452.

Rao, Govinda R and Sahoo, K L and Ganguly, R I and Dash, R R and Narasaiah, N (2017) Effect of Flyash Treatment on the Properties of Al-6061 Alloy Reinforced with SiC–Al2O3–C Mixture. Transactions of the Indian Institute of Metals, 70(10) (IF-0.533). pp. 2707-2717.

Kumar, Sunil and Srivastava, V C and Mandal, G K and Pattanayek, S K and Sahoo, K L (2017) Single-Walled Carbon Nanotube Engendered Pseudo-1D Morphologies of Silver Nanowire. Journal of Physical Chemistry C, 121 (IF-4.536). pp. 20468-20480.

Poddar, Palash and Gupta, Savita and Sahoo, K L (2017) Magnesium-tin based composites processed through stir casting. Journal of Metallurgy and Materials Science, 59(4) . pp. 153-161.

Poddar, Palash and Kamaraj, A and Murugesan, A P and Bagui, Sumanta and Sahoo, K L (2017) Microstructural features of Mg-8%Sn alloy and its correlation with mechanical properties. Journal of Magnesium and Alloys, 5(3) . pp. 348-354.

Sahoo, K L and Poddar, Palash (2017) Studies on Magnesium Alloys–Properties and Potential for Automotive and Aerospace Applications. Transaction of 65th Indian foundry Congress 2017 . pp. 151-156.

Gaurav, G and Murtaza, Q and Yuvraj, N and Mandal, D and Sahoo, K L and Murmu, L (2017) Synthesis and effect of Misch metal on mechanical properties of conventional cast Mg-Al-Zn-Sn-Pb alloy system. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231(7) (IF-1.625).

Murthy, G V S and Patel, D and Sahoo, K L (2016) A study of precipitation behaviour of A356 alloy using ultrasonic velocity measurements. Insight - Non-Destructive Testing and Condition Monitoring, 58 (IF-0.527). pp. 367-372.

Reddy, G and Sahoo, K L and Ganguly, R I and Dash, R R and Rao, P S P and Reddy, G S (2016) Cast and age hardening behaviour of Al6061 alloy reinforced with an in-situ ceramic composite prepared by carbo thermal reduction of fly ash in plasma reactor. Journal Of Composite Materials, 50(22) (IF-1.494). pp. 3027-3041.

Das, Suchandan K and Mandal, D and Sahoo, K L (2015) Neural Modeling and Experimental Investigation of the Erosion Characteristics of Boiler Grade Steels Impacted by Fly Ash. Journal of Materials Engineering and Performance, 24(9) (IF-0.998). pp. 3513-3526.

Ghosh Chowdhury, S and Minz, R K and Rajnikanth, V and Munda, Parikshit and Shah, Minal and Das, Swapan K and Sahoo, K L and Paul, K K (2015) Development of new silt erosion resistant steel for hydro turbine components. Iron & Steel Review, 59(6) .

Siva, S B V and Ganguly, R I and Rao, G S and Sahoo, K L (2015) Quantitative studies on wear behavior of Al-(Al2O3-SiC-C) composite prepared with in situ ceramic composite developed from colliery waste. Proceeding of the institution Mechanical EngineersPart J-Jornal of Engineering Tribology, 229(7) (IF-0.916). pp. 823-834.

Poddar, Palash and Das, Arpan and Sahoo, K L (2014) Dry Sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys. Metallurgical and Materials Transactions A , 45A(4) (IF-1.730). pp. 2270-2283.

Poddar, Palash and Das, Arpan and Sahoo, K L (2014) Dry sliding wear characteristics of rheocast Mg–Sn based alloys. Materials & Design, 54 (IF-3.171). pp. 820-830.

Venkata Siva, S B and Ganguly, R I and Srinivasarao, G and Sahoo, K L (2013) Machinability of Aluminum Metal Matrix Composite Reinforced with In-Situ Ceramic Composite Developed from Mines Waste Colliery Shale. Materials and Manufacturing Processes, 28(10) . pp. 1082-1089.

Paswan, Dayanand and Mistry, D and Sahoo, K L and Srivastava, V C (2013) Development of Iron-based Closed-Cell Foams by Powder Forging and Rolling. Journal of Materials Engineering and Performance, 22(8) (IF-0.915). pp. 2201-2209.

Venkata Siva, S B and Sahoo, K L and Ganguly, R I and Dash, R R and Singh, S K and Satpathy, B K and Srinivasarao, G (2013) Preparation of Aluminum Metal Matrix Composite with Novel In situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material. Metallurgical and Materials Transactions B , 44 (IF-1.212). pp. 800-808.

Sahoo, K L and Sahu, Rina (2013) Glass transition and crystallization of Al–Ni–La based metallic glasses studied by temperature modulated DSC. Journal of Non-Crystalline Solids, 365 (IF-1.597). pp. 33-36.

Pathak, B N and Sahoo, K L and Mishra, Madhawanand (2013) Effect of Machining Parameters on Cutting Forces and Surface Roughness in Al-(1-2) Fe-1V-1Si Alloys. Materials and Manufacturing Processes, 28(4) . pp. 463-469.

Mohanty, Ashok and Sahoo, K L (2013) Technological Interventions for Brassware Clusters. Science & Culture, 79 . pp. 205-206.

Srivastava, V C and Poddar, Palash and Rajnikanth, V and Sahoo, K L (2012) Light metals research - Legacy and current standing. Science & Culture, 78(11-12) . pp. 527-531.

Poddar, Palash and Sahoo, K L (2012) Microstructure and mechanical properties of conventional cast and rheocast Mg-Sn based alloys. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 556 (IF-2.003). pp. 891-905.

Poddar, Palash and Sahoo, K L and Mukherjee, S and Ray, Ashok K (2012) Creep behaviour of Mg-8% Sn and Mg-8% Sn-3% Al-1% Si alloys. Materials Science and Engineering A, 545 . pp. 103-110.

Venkata Siva, S B and Sahoo, K L and Ganguly, R I and Dash, R R (2012) Effect of Hot Working on Structure and Tribological Properties of Aluminium Reinforced with Aluminium Oxide Particulates. Journal of Materials Engineering and Performance, 21 (7). pp. 1226-1231.

Poddar, Palash and Das, Arpan and Sahoo, K L (2012) Effect of rare earth elements on tribological behaviour of magnesium alloys. Tribology: Materials, Surfaces & Interfaces, 6(4) . pp. 147-154.

Sahoo, K L and Mandal, D and Paul, K K and Ghosh, Sukomal (2012) Metallurgical heritage of India : Preservation and rejuvenation. Science and Culture . pp. 532-536.

Pathak, B N and Mishra, M N and Sahoo, K L (2012) Solidification behavior, microstructure and mechanical properties of Al-(1 to 5)Fe-1V-1Si alloys. Journal of Metallurgy and Materials Science, 54(4) . pp. 291-298.

Mitra, A and Sinha, Arvind and Mishra, Suman K and Sahoo, K L (2011) Nanostructured Materials Research at NML. Nano Digest, 3 (4-5). pp. 30-32.

Gangopadhyay, A K and Sahoo, K L and Kelton, K F (2011) Importance of solute-solute interactions on glass formability. Philosophical Magazine, 91 (17). pp. 2186-2199.

Datta, A K and Mandal, D and Sahoo, K L (2011) Measuring uncertainties of metal working processes in computational simulations : A novel approach. Journal of Metallurgy and Materials Science, 53 (2). pp. 183-187.

Mitra, A and Sinha, Arvind and Mishra, Suman K and Sahoo, K L (2010) Nanostructured materials: research at NML. Nano Digest, 2 (3). pp. 42-44.

Sahu, Rina and Kailath, A J and Chatterjee, S and Sahoo, K L (2010) Effect of La content on the room temperature ageing behavior of Al90−xNi6La4+x (x = 0–3) metallic glasses. Materials Science and Engineering: A, 527 (6). pp. 1339-1342.

Sahu, Rina and Chatterjee, S and Sahoo, K L (2010) Mechanical Properties and Nanocrystallization Behavior of Al-Ni-La Alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41 (4). pp. 861-869.

Sahoo, K L and Poddar, Palash and Kumar, Randhir and Pushp, P T (2009) Strain induced melt activation — an effective route to produce high performance alloy plates and sheets. Transactions of the Indian Institute of Metals, 62 (4-5). pp. 275-278.

Sahu, Rina and Gangopadhyay, A K and Kelton, K F and Chatterjee, S and Sahoo, K L (2009) Room temperature ageing of Al–Ni–RE (RE = La, Gd, Er) metallic glasses. Scripta Materialia, 61 (6). pp. 588-591.

Roy, Ajoy K and Mandhyan, A K and Sahoo, K L and Banhart, J and Chattoraj, I (2009) Electrochemical response of amorphous and devitrified Al-Ni-La-X (X = Ag, Cu) alloys. Materials and Corrosion / Werkstoffe und Korrosion, 60 (6). pp. 431-437.

Sahu, Rina and Kailath, A J and Chatterjee, S and Sahoo, K L (2009) Effect of La content on the room temperature ageing behavior of Al90-xNi6La4+x (x = 0 to 3) metallic glasses. Materials Science and Engineering A, 527 (6). pp. 1339-1342.

Sahoo, K L and Pathak, B N (2009) Solidification behaviour, microstructure and mechanical properties of high Fe-containing Al–Si–V alloys. Journal of Materials Processing Technology, 209 (2). pp. 798-804.

Poddar, Palash and Mukherjee, Surojit and Sahoo, K L (2009) The Microstructure and Mechanical Properties of SiC Reinforced Magnesium Based Composites by Rheocasting Process. Journal of Materials Engineering and Performance, 18 (7). pp. 849-855.

Sahoo, K L and Sahu, Rina and Ghosh, M and Chatterjee, S (2008) Studies on crystallization behaviour and mechanical properties of Al-Ni-La metallic glasses. Bulletin of Materials Science, 31 (3). pp. 433-439.

Radiguet, B and Blavette, D and Wanderka, N and Banhart, J and Sahoo, K L (2008) Segregation-controlled nanocrystallization in an Al–Ni–La metallic glass. Applied Physics Letters, 92 . 103126-1-103126-3.

Kumar, Randhir and Poddar, Palash and Pushp, P T and Sahoo, K L (2008) Strain Induced Melt Activation (SIMA) - A New Challenging Manufacturing Process for Automotive Applications. Indian Foundry Journal, 54(3) . pp. 35-39.

Sahoo, K L and Poddar, Palash and Das, Goutam and Ravi Kumar, B (2007) Crystallization behaviour and mechanical properties of rapidly solidified Al87.5Ni7Mm5Fe0.5 amorphous alloy. Journal of Materials Science, 42 (16). pp. 6665-6671.

Poddar, Palash and Srivastava, V C and De, P K and Sahoo, K L (2007) Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process. Materials Science and Engineering A, 460-461 . pp. 357-364.

Roy, A and Sahoo, K L and Chattoraj, I (2007) Electrochemical response of AlNiLa amorphous and devitrified alloys. Corrosion Science, 49 (6). pp. 2486-2496.

Sahoo, K L and Wollgarten, M and Banhart, J (2007) Effect of solidification rate and composition on microstructure and crystallization in Al-Ni-La metallic glasses. Transaction of Indian Institute of Metals, 60 (2). pp. 349-354.

Wollgarten, M and Sahoo, K L and Haug, J and Banhart, J (2007) Influence of La on the crystallisation behaviour of amorphous Al94−xNi6Lax (x=4 –7) alloys. Materials Science and Engineering A, 449-451 . pp. 1049-1051.

Wanderka, N and Radiguet, B and Sahoo, K L and Banhart, J (2007) Crystallization Behavior of Al87Ni5La7Zr1 Metallic Glass. Materials Science Forum, 539-543 . pp. 1917-1920.

Sahoo, K L and Sahu, Rina and Mitra, A (2007) Kinetic aspects of the nanocrystallization and evolution of microhardness in Al92-XNi8LaX amorphous alloys. Materials and Manufacturing Processes, 22 (4). pp. 497-501.

Srivastava, V C and Sahoo, K L (2007) Processing, stabilization and applications of metallic foams. Art of science. Materials Science - Poland, 25 (3). pp. 735-753.

Dey, A K and Poddar, Palash and Singh, K K and Sahoo, K L (2006) Mechanical and wear properties of rheocast and conventional gravity die cast A356 alloy. Materials Science and Engineering A, 435-436 . pp. 521-529.

Pathak, B C and Kumar, Arvind and Sahoo, K L and Talukdar, P (2006) Effect of Ni–Mg on the microstructure and properties of Al–(4–5)Fe–1V–1Si alloys. Materials Science and Engineering A, 433 (1-2). pp. 310-315.

Srivastava, V C and Sahoo, K L (2006) Metallic Foams : Current Status and Future Prospects. IIM Metal News, 9 (4). pp. 9-13.

Sahoo, K L and Wollgarten, M and Kim, K B and Banhart, J (2005) Crystallization behavior and microhardness evolution in Al92-xNi8Lax amorphous alloys. Journal of Materials Research, 20 (11). pp. 2927-2933.

Sahoo, K L and Stone, I C (2005) Effect of Si on the formation and stability of the icosahedral quasicrystalline phase in Al-Fe-Cr-Ti alloys. Philosophical Magazine Letters Online ISSN 1362-3036, 85 (5). pp. 231-245.

Sahoo, K L and Wollgarten, M and Haug, J and Banhart, J (2005) Effect of La on the crystallization behaviour of amorphous Al94 − xNi6Lax (x = 4–7) alloys. Acta Materialia, 53 (14). pp. 3861-3870.

Sahoo, K L and Mitra, A and Ghosh, S (2005) Effect of rare-earth Elements on Nanophase Evolution, Crystallization Behaviour and Mechanical Properties in Al-Ni-R (R = La/Mischmetal) Amorphous Alloys. Pramana - journal of physics, 65 (4). pp. 745-751.

Sinha, D and Sahoo, K L and Sinha, U B and Swu, T and Chemseddine, A and Fink, D (2004) Gamma-induced modifications of polycarbonate polymer. Radiation Effects and Defects in Solids, 159 (10). pp. 587-595.

Sahoo, K L and Das, Samar and Murty, B S (2004) Formation of quasicrystalline related intermetallic compounds in conventionally cast Al-Fe-V-Si alloy. Journal of Non-Crystalline Solids, 334 . pp. 29-32.

Sahoo, K L and Panda, A K and Das, S and Rao, Venkatesh (2004) Crystallization study of amorphous Al87.5Ni7Mm5Fe0.5 alloy by electrical resistivity measurement. Materials Letters, 58 (3-4). pp. 316-320.

Sahoo, K L and Das, Swapan K and Murty, B S (2003) Formation of novel microstructures in conventionally cast Al-Fe-V-Si alloys. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing , 355 (1-2). pp. 193-200.

Sahoo, K L and Das, S K and Murty, B S (2003) Formation of novel microstructures in conventionally cast Al–Fe–V–Si alloys. Materials Science and Engineering A, 355 (1-2). pp. 193-200.

Sahoo, K L and Rao, Venkatesh and Mitra, A (2003) Crystallization kinetics in an amorphous Al-Ni-Mm-Fe alloy. Materials Transactions , 44 (6). pp. 1075-1080.

Sahoo, K L and Das, Swapan K (2003) Effect of magnesium on sliding wear performance of cast Al-8.3Fe-0.8V-0.9Si alloys. Materials Science and Technology, 19 (7). pp. 959-965.

Sahoo, K L and Sivaramakrishnan, C S (2003) Some studies on Al–8.3Fe–0.8V–0.9Si alloy for near net shape casting. Journal of Materials Processing Technology, 135 (2-3). pp. 253-257.

Chattaraj, Mousumi and Sahoo, K L and Singh, H P and Ghosh, Sukomal (2003) Studies on the Potentiality of Kusum Oil (Schleichera Oleosa) as a Core and Mould Binder for Foundry Applications. Indian Foundry Journal, 49(4) . pp. 25-28.

Agrawal, A and Sahoo, K L and Ghosh, Sukomal and Pandey, B D (2002) Recovering Iron from Copper Slag. Foundry Management & Technology, October . pp. 16-21.

Sahoo, K L and Sivaramakrishnan, C S and Chakrabarti, A K (2001) The effect of Mg treatment on the properties of Al–8.3Fe–0.8V–0.9Si alloy. Journal of Materials Processing Technology, 112 (1). pp. 6-11.

Sahoo, K L and Sivaramakrishnan, C S and Chakrabarti, A K (2000) Solidification characteristics of the Al-8.3Fe-0.8V-0.9Si alloy. Metallurgical and Materials Transactions A, 31 (6). pp. 1599-1610.

Sahoo, K L and Sivaramakrishnan, C S and Chakrabarti, A K (2000) Studies on wear characteristics of Al–Fe–V–Si alloys. Wear, 239 (2). pp. 211-218.

Sahoo, K L and Sivaramakrishnan, C S and Chakrabarti, A K (2000) Modification of cast structure in Al-8 center dot 3Fe-0 center dot 8V-0 center dot 9Si alloy by magnesium treatment. Materials Science and Technology, 16 (2). pp. 227-230.

Sahoo, K L (1994) Improvement of steel shots and its service life assessment in foundry operation. Indian Foundry Journal, 40 . pp. 3-5.

Conference or Workshop Item

Srivastava, V C and Singh, Mirtunjay and Kumar, Tipu and Sahoo, K L (2011) Effect of Al-alloy composition and foaming temperature on pore size, density and mechanical properties. In: International Conference on Porous Metals and Metallic Foams (MetFoam-2012), September 18-21, 2011, Busan, Korea.

Sinha, Nidhi and Sahoo, K L (2008) Melting and Casting of Non-ferrous Metals and Alloys. In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Sinha, Nidhi and Srivastava, V C and Sahoo, K L (2008) Processing and Application of Aluminium Foams. In: Training Programme on Special Metal Casting and Forming Processes - (CAFP - 2008), Feb. 25-26, 2008, NML, Jamshedpur.

Project Reports

Gupta, Savita and Poddar, Palash and Sahoo, K L (2012) An investigation on the microstructure and mechanical properties of Mg-Sn based alloys and composites. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Srinivasan, A and De, P K and Srivastava, V C and Poddar, Palash and Sahoo, K L and Ghosh Chowdhury, S and Swaminathan, J (2007) Studies on Large Strain Rolling (LSR) of AZ31 Magnesium Alloy. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Poddar, Palash and De, P K and Srivastava, V C and Das, Swapan K and Das, Goutam and Sahoo, K L and Mandal, D and Paul, K K and Ghosh, Sukomal (2006) Development of Rheocasting Facility and Production of Mg - Based Composites. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

Video

Mohanty, Ashok and Sahoo, K L (2012) Technological Interventions of Brassware Cluster at Moradabad by CSIR-NML. [Video]

This list was generated on Fri Mar 29 19:25:43 2024 IST.