Items where Author is "Kumar, Anil"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 22.

Article

Chattoraj, I and Kumar, Anil and Das, Swapan K and Tarafder, Mita and Tarafder, Soumitra (2022) Factors influencing the extent of hydrogen-enhanced brittle cracking in a Cu-strengthened HSLA steel during monotonic loading. International Journal of Materials Research, 94(11) . pp. 1228-1233.

Kumar, Sujeet and Djobo, J N Y and Kumar, Anil and Kumar, Sanjay (2020) Size fractionation of brown fly ash: utilisation of grey fraction as a pozzolanic material in blended cement. European Journal of Environmental and Civil Engineering , 24(6) . pp. 833-848.

Ghosh, Rachit and Sagar, S P and Kumar, Anil and Gupta, S K and Kumar, Sanjay (2018) Estimation of geopolymer concrete strength from ultrasonic pulse velocity (UPV) using high power pulser. Journal of Building Engineering, 16 . pp. 39-44.

Ghosh, Rachit and Gupta, S K and Kumar, Anil and Kumar, Sanjay (2018) Leaching and efflorescence effects in geopolymer concrete. Journal of Metallurgy and Materials Science, 60(2) . pp. 79-88.

Ghosh, Rachit and Gupta, S K and Kumar, Anil and Kumar, Sanjay (2018) Replacement of conventional fine aggregate with bottom ash in geopolymer concrete. Journal of Metallurgy and Materials Science, 60(3) . pp. 173-187.

Chintala, Rajesh and Rath, R K and Kumar, Anil (2017) Effective Utilization of Fly Ash, Iron Ore Slime and LD-Slag in Geopolymer Mortar. Recent Trends in Civil Engineering & Technology, 7(1) . pp. 9-16.

Kumar, Sujeet and Djobo, Jean NoëlYankwa and Kumar, Anil and Kumar, Sanjay (2016) Geopolymerization behavior of fine iron-rich fraction of brown fly ash. Journal of Building Engineering, 8 (IF-1.055). pp. 172-178.

Jyolsna, Jerin and Rath, R K and Kumar, Anil (2016) Partial Replacement of Sand and Cement by Iron Ore Slime for Concrete Building Material. Recent Trends in Civil Engineering & Technology, 6(2) . pp. 37-42.

Chintala, Rajesh and Rath, R K and Kumar, Anil (2016) Recovery of Iron Values from Iron Ore Slimes using Reagents. Journal of Materials & Metallurgical Engineering, 6(3) . pp. 32-43.

Jyolsna, Jerin and Rath, R K and Kumar, Anil (2016) Recovery of Iron Values from Waste Iron Ore Slime. Journal of Materials & Metallurgical Engineering, 6(3) . pp. 1-7.

Malathi, M and Kumar, Anil and Godiwalla, K M and Chacko, Z E and Ajmani, S K and Ranganathan, S (2014) Cold Model Study of Submerged Peripheral Gas Bubbling from a Cylindrical Dispenser. ISIJ International, 54(10) (IF-1.069). pp. 2239-2247.

Malathi, M and Kumar, Anil and Chacko, Z.E and Godiwalla, K.M and Ajmani, S K and Ranganathan, S (2013) Desulfurization of Hot Metal Through In Situ Generation of Magnesium in 30-kg Molten Iron Bath-Influence of Inert Gas Flow Rate. Steel Research International, 85 (IF-1.15). pp. 927-934.

Ghosh, Rachit and Kumar, Anil and Kumar, Sanjay (2013) Flyash Geopolymer Concrete as Future Concrete. International Journal of Advanced Scientific and Technical Research, 6(3) . pp. 260-271.

Kumar, Anil and Ravi Kumar, B and Chattoraj, I and Mukherjee, S and Basumallick, A (2004) Alteration in hydrogen absorption by and hydrogen permeation through a high-strength low-alloy steel due to plasma source ion implantation of nitrogen. Metallurgical and Materials Transactions B, 35 (6). pp. 1123-1128.

Kumar, Anil (2004) Hot-dip zinc coatings - A comparative study: Part II. Journal of Metallurgy and materials Science, 46 (2). pp. 115-121.

Singh, Raghuvir and Chattoraj, I and Kumar, Anil and Ravi Kumar, B and De, P K (2003) The effects of cold working on sensitization and intergranular corrosion behavior of AISI 304 stainless steel. Metallurgical and Materials Transactions A, 34 (11). pp. 2441-2447.

Kumar, Anil and Jha, G (2001) Hot-dip zinc coatings - A comparative study. Journal of Metallurgy and materials Science, 43 (1). pp. 9-16.

Kumar, Anil and Khanna, A S and Banerjee, M K (2001) Epoxy coatings for rebar - A study. Journal of Metallurgy and materials Science, 43 (3). pp. 189-195.

Conference or Workshop Item

Rath, R K and Kumar, Shivesh and Singh, Ratnakar and Kumar, Anil (2017) Effect on air quality and treatment of solid waste generated during processing of iron ores for steel making. In: National Conference on Environmental issues, challenges and solutions (EICS ' 2016), February 2017, SAIL, Ranchi.

Rath, R K and Kar, A K and Mohanta, M K and Singh, Ratnakar and Kumar, Anil (2011) Surface Chemical and Settling Studies on Hematite, Quartz and Kaolinite in Presence of Organic Reagents. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udaipur.

Kar, A K and Rath, R K and Mohanta, M K and Singh, Ratnakar and Kumar, Anil (2010) Characterisation and surface chemical studies on ultrafine iron ore. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kumar, Shivesh and Rath, R K and Singh, Ratnakar and Kumar, Anil (2010) Separation of iron bearing minerals from slime by flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

This list was generated on Fri Mar 29 13:12:30 2024 IST.