Items where Author is "Gunjan, M K"

Article

Swaminathan, J and Singh, Raghuvir and Gunjan, M K and Mahato, B (2011) Sensitization induced stress corrosion failure of AISI 347 stainless steel fractionator furnace tubes. Engineering Failure Analysis, 18 (8). pp. 2211-2221.

Ray, Ashok K and Kumar, S and Guguloth, K and Gunjan, M K and Goswami, B and Bose, S C (2011) Microstructural studies and remnant life assessment of eleven years service exposed reformer tube. Materials Science and Engineering A, 529 (1). pp. 102-112.

Ray, Ashok K and Tiwari, Y N and Guguloth, K and Das, Goutam and Gunjan, M K and Bose, S C and Ghosh, R N (2011) Health assessment of 22 years service-exposed radiant tube from an oil refinery. Engineering Failure Analysis, 18 (3). pp. 1067-1075.

Roy, Rajat K and Singh, Satnam and Gunjan, M K and Panda, A K and Mitra, A (2011) Joining of 304SS and pure copper by rapidly solidified Cu-based braze alloy. Fusion Engineering and Design, 86 . pp. 452-455.

Mohapatra, J N and Bandopadhyay, N R and Gunjan, M K and Mitra, A (2010) Study of high-temperature ageing and creep on bainitic 5Cr–0.5Mo steel by magnetic NDE techniques. Journal of Magnetism and Magnetic Materials, 322 (6). pp. 589-595.

Srinivasan, A and Swaminathan, J and Gunjan, M K and Pillai, U T S and Pal, B C (2010) Effect of intermetallic phases on the creep behavior of AZ91 magnesium alloy. Materials Science and Engineering: A, 527 (6). pp. 1395-1403.

Ghosh, M and Gunjan, M K and Das, Swapan K and Kar, Abhijit and Ghosh, R N and Ray, Ajoy K (2010) Effect of Mn on Sn–Ag–Cu ternary lead free solder alloy–Cu assembly: a comparative study. Materials Science and Technology, 26 (5). pp. 610-614.

Swaminathan, J and Singh, Raghuvir and Gunjan, M K and Chattoraj, I (2009) Failure analysis of air pre-heater tubes of a petrochemicals plant. Engineering Failure Analysis, 16 (7). pp. 2371-2381.

Sinha, Arvind and Gupta, A K and Pramanick, A K and Nayar, S and Gunjan, M K and Mishra, T and Bhatt, N C and Vishwanath, N and Das, Samar (2009) Mimicking biomineralization under microgravity. Materials Science and Engineering: C, 29 (3). pp. 779-784.

Mishra, T and Hait, Jhumki and Aman, Noor and Gunjan, M K and Mahato, B and Jana, R K (2009) Corrigendum to “Surfactant mediated synthesis of spherical binary oxides photocatalyst with enhanced activity in visible light” [J. Colloid Interface Sci. 327 (2008) 377–383]. Journal of Colloid and Interface Science, 330 (1). 243- .

Dey, Swapna and Gunjan, M K and Chattoraj, I (2008) Effect of temper on the distribution of pits in AA7075 alloys. Corrosion Science, 50 (10). pp. 2895-2901.

Swaminathan, J and Prasad, Prabha and Gunjan, M K and Guguloth, K and Roy, P K and Singh, Raghubir and Ghosh, R N (2008) Mechanical strength and microstructural observations for remaining life assessment of service exposed 24Ni–24Cr–1.5Nb cast austenitic steel reformer tubes. Engineering Failure Analysis , 15 (6). pp. 723-735.

Sinha, Arvind and Nayar, S and Kar, Abhijit and Gunjan, M K and Mahato, B and Das, Goutam and Kumar, Arun and Chabra, Aman (2008) Microhydrogel-Mediated Synthesis of Sintered Hydroxyapatite Granules. International Journal of Applied Ceramic Technology, 5 (5). pp. 458-463.

Swaminathan, J and Guguloth, K and Gunjan, M K and Roy, P K and Ghosh, R N (2008) Failure analysis and remaining life assessment of service exposed primary reformer heater tubes. Engineering Failure Analysis, 15 (4). pp. 311-331.

Nayar, S and Pramanick, A K and Guha, Avijit and Mahato, B and Gunjan, M K and Sinha, Arvind (2008) Biomimetic synthesis of hybrid nanocomposite scaffolds by freeze-thawing and freeze-drying. Bulletin of Material Science, 31 (3). pp. 429-432.

Singh, R N and Singh, A and Mishra, D and Tiwari, S K and Gunjan, M K (2008) Influence of substitution of Ru on the electrocatalytic properties of the perovskite-type LaSrNiO4 electrode towards methanol oxidation. Indian Journal Of Chemistry Section A-Inorganic Bio-Inorganic Physical Theoretical & Analytical Chemistry , 47 (8). pp. 1187-1193.

Tiwari, S K and Mishra, T and Gunjan, M K and Bhattacharyya, A S and Singh, T B and Singh, Raghuvir (2007) Development and characterization of sol–gel silica–alumina composite coatings on AISI 316L for implant applications. Surface and Coatings Technology, 201 (16-17). pp. 7582-7588.

Mohapatra, J N and Panda, A K and Gunjan, M K and Bandopadhyay, N R and Mitra, A and Ghosh, R N (2007) Ageing behavior study of 5Cr–0.5Mo steel by magnetic Barkhausen emissions and magnetic hysteresis loop techniques. NDT & E International, 40 (2). pp. 173-178.

Venkateswarlu, K and Ray, Ajoy K and Gunjan, M K and Mondal, D P and Pathak, L C (2006) Tribological wear behavior of diamond reinforced composite coating. Materials Science and Engineering A, 418 (1-2). pp. 357-363.

Mohapatra, J N and Panda, A K and Gunjan, M K and Mitra, A (2006) Evaluation of ageing behavior in modified 9Cr-1Mo steel by magnetic barkhausen emission technique. Journal of Metallurgy and Materials Science, 48 (3). pp. 167-171.

Project Reports

Murmu, Laxmi and Ghosh Chowdhury, S and Gunjan, M K (2011) Project report on Microstructural Evolution of Ultra Fine Grained C-Mn Steel warm Rolling and Inter-Critical Annealed. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Sridhar, G and Gunjan, M K and Munda, Parikshit and Kumar, Pankaj and Roy, P K and Prakash, Amit and Sharma, R K and Singh, S R (2011) Root cause analysis of bucket stage III OF GT-2A. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Ravi Kumar, B and Murthy, G V S and Mahato, B and Metya, Avijit Kumar and Gunjan, M K and Singh, S R (2011) Non-Destructive and Destructive Investigation of MLG Parts of MIG 29 Aircraft (TMP-0165). Other (TMP). National Metallurgical Laboratory (NML), Jamshedpur. (Submitted)

Bar, H N and Sahu, J K and Parida, N and Gunjan, M K (2011) Failure Investigation of Components of Aero Engine No. HDR-80376U. Other (TMP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Ray, Ashok K and Roy, Nilima and Sahu, J K and Tiwari, Y N and Ray, R K and Sharma, R K and Gunjan, M K and Singh, S R (2011) Studies on creep behaviour and Statistical analysis of services exposed P-22 grade of Steel. Exploratory (OLP). CSIR-NML, Jamshdpur.

Swaminathan, J and Chattoraj, I and Gunjan, M K and Konar, J and Updhyay, A K (2007) Failure Analysis of air Pre-Heater Tubes. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Singh, S R and Das, S K and Gunjan, M K (2007) Flying Accident to Mig-21/C-1129 of MOFTU 'A'/11 Wg/Eac. Other (TMP). CSIR-NML, Jamshedpur. (Submitted)

Swaminathan, J and Krishna, G and Gunjan, M K and Mahato, B and Ravi Kumar, B and Hansda, K L and Sharma, R K and Upadhyay, A K (2007) Failure Analysis of Water wall Tubes of Boiler No.7. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Sridhar, G and Singh, S R and Das, Swapan K and Gunjan, M K and Rupa, P K P (2007) Failure Analysis of Damaged parts of a Roller press at Jay Pee Bela Cement Plant, M.P. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Singh, S R and Gunjan, M K and Kumar, Arvind (2006) Failure Analysis of Bolts of Wheel Hub Assembly of AN-32 Aircraft and Comparative Metallurgical Analysis of Russian and Indigenised Bolts. Other (TMP). CSIR-NML, Jamshedpur. (Submitted)

Sridhar, G and Ghosh Chowdhury, S and Singh, S R and Parida , N and Singh, D D N and Das, Swapan K and Roy, P K and Das , Goutam and Gunjan, M K (2006) Failure Analysis of LP Turbine Blade of NTPC-Tanda. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Sridhar, G and Singh, S R and Das, Swapan K and Gunjan, M K (2006) Failure Analysis of Engine Block of 6.2 MW DG set of Hindustan Glass Ltd. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Das, Swapan K and Singh, S R and Gunjan, M K (2006) Investigation on Failure of Drop Tank Suspension Rod of Mig-21 T-96 Aircraft. Other (TMP). CSIR-NML, Jamshedpur. (Submitted)