Items where Author is "Ghosh, Sabita"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Jump to: Article
Number of items: 19.

Article

Ghosh, Sabita and Prakash, R V (2013) Study of Damage and Fracture Toughness due to Influence fo Creep and Fatigue of Commercially Pure Copper by Monotonic and Cyclic Indentation. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science , 44A(1) (IF-1.738). pp. 224-234.

Ghosh, Sabita and Das, Goutam (2012) Effect of pre strain on the indentation fracture toughness of high strength low alloy steel by means of continuum damage mechanics. Engineering Fracture Mechanics, 79 . pp. 126-137.

Das, Goutam and Das, Mousumi and Ghosh, Sabita and Dubey, A K (2010) Effect of aging on mechanical properties of 6063 Al-alloy using instrumented ball indentation technique. Materials Science and Engineering: A, 527 (6). pp. 1590-1594.

Ghosh, Sabita and Tarafder, Mita and Sivaprasad, S and Tarafder, S (2010) Experimental and numerical study of ball indentation for evaluation of mechanical properties and fracture toughness of structural steel. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 617-622.

Ghosh, Sabita and Yadav, Sandip and Das, Goutam (2008) Ball Indentation Technique: A currently developed tool to study the effect of various heat treatments on the mechanical properties of En24 steel. Materials Letters, 62 (24). pp. 3966-3968.

Murthy, G V S and Ghosh, Sabita and Das, Mousumi and Das, Goutam and Ghosh, R N (2008) Correlation between ultrasonic velocity and indentation-based mechanical properties with microstructure in Nimonic 263. Materials Science and Engineering A, 488 (1-2). pp. 398-405.

Ghosh, Sabita and Pal, T K and Mukherjee, Surojit and Das, Goutam and Ghosh, Sukomal (2008) Comparative study of heat-affected zone with weld and base material after post-weld heat treatment of HSLA steel using ball indentation technique. Journal of Materials Science, 43 (16). pp. 5474-5482.

Ghosh, Sabita and Yadav, Sandip and Das, Goutam (2008) Study of standard heat treatment on mechanical properties of Inconel 718 using ball indentation technique. Materials Letters, 62 (17-18). pp. 2619-2622.

Das, Goutam and Ghosh, Sabita and Bose, S C and Ghosh, Sukomal (2006) Use of ball indentation technique to evaluate room temperature mechanical properties of a gas turbine blade. Materials Science and Engineering A, 424 (1-2). pp. 326-332.

Das, Goutam and Ghosh, Sabita and Ghosh, Sukomal (2006) Structure–property correlation of EN steel and evaluation of mechanical properties through BIT. NDT & E International, 39 (2). pp. 155-161.

Das, Goutam and Ghosh, Sabita and Ghosh, Sukomal and Ghosh, R N (2005) Materials characterization and classification on the basis of materials pile-up surrounding the indentation. Materials Science and Engineering A, 408 (1-2). pp. 158-164.

Das, Goutam and Ghosh, Sabita and Sahay, S K (2005) Use of ball indentation technique to determine the change of tensile properties of SS316L steel due to cold rolling. Materials Letters, 59 (18). pp. 2246-2251.

Das, Goutam and Ghosh, Sabita and Sahay, S K and Ranganath, V R and Vaze, K K (2004) Influence of pre-straining on mechanical properties of HSLA steel by using ball indentation technique. Zeitschrift Fur Metallkunde, 95 (12). pp. 1120-1127.

Ghosh, Sabita and Sahay, S K and Das, Goutam (2004) Ball indentation technique - An important and useful method for studying the flow properties of materials. Transactions Of The Indian Institute Of Metals, 57 (1). pp. 51-60.

Ghosh, Sabita and Sahay, S K and Das, Goutam (2004) Effectiveness of ball indentation technique for evaluating mechanical properties of micro alloyed steel. Journal of Metallurgy and materials Science, 46 (2). pp. 95-105.

Das, Goutam and Ray, Ashok K and Ghosh, Sabita and Das, Swapan K and Bhattacharya, D K (2003) Fatigue failure of a boiler feed pump rotor shaft. Engineering Failure Analysis, 10 (6). pp. 725-732.

Das, Goutam and Ghosh, Sabita and Sahay, S K and Ranganath, V R and Vaze, K K (2003) Development and validation of ball indentation technique to evaluate the mechanical properties of materials. Transactions Of The Indian Institute Of Metals , 56 (5). pp. 465-475.

Das, Goutam and Ghosh, Sukomal and Ghosh Chowdhury, S and Ghosh, Sabita and Das, Swapan K and Bhattacharya, D K (2003) Investigation of sub-surface cracks in continuous cast billets. Engineering Failure Analysis, 10 (3). pp. 363-370.

Ray, Ashok K and Tiwari, Y N and Chaudhuri, S and Ranganath, V R and Sivaprasad, S and Roy, P K and Das, Goutam and Ghosh, Sabita and Kumar, P and Ghosh, R N (2002) Remaining life assessment of service exposed reheater and superheater tubes in a boiler of a thermal power plant. High Temperature Materials and Processes, 21 (1-2). pp. 109-121.

This list was generated on Thu Mar 28 15:51:52 2024 IST.