Items where Author is "Ghosh, R N"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 114.

Article

Baral, J and Swaminathan, J and Chakrabarti, D and Ghosh, R N (2017) Effect of welding on creep damage evolution in P91B steel. Journal of Nuclear Materials, 490 (IF-2.048). pp. 333-343.

Guguloth, K and Swaminathan, J and Roy, Nilima and Ghosh, R N (2017) Uniaxial creep and stress relaxation behavior of modified 9Cr-1Mo steel. Materials Science and Engineering A- Structural Materials Properties Micro-structure and Processing, 684 (IF-3.094). pp. 683-696.

Banerjee, A and Sahu, J K and Paulose, N and Fernando, C D and Ghosh, R N (2016) Micromechanism of cyclic plastic deformation of alloy IN 718 at 600°C. Fatigue & Fracture Of Engineering Materials And Structures, 39(7) (IF-2.335). pp. 877-885.

Gopinath, K and Gupta, R K and Sahu, J K and Ray, P K and Ghosh, R N (2015) Designing P92 grade martensitic steel header pipes against creep–fatigue interaction loading condition: Damage micromechanisms. Materials & Design, 86 (IF-3.501). pp. 411-420.

Baral, Jayashree and Swaminathan, J and Chakrabarti, D and Ghosh, R N (2015) Creep behavior of P91B steel in the presence of a weld joint. Materials Science and Engineering A, 631 (IF-2.409). pp. 220-229.

Ghosh, A and Sahoo, S and Ghosh, M and Ghosh, R N and Chakrabarti, D (2014) Effect of microstructural parameters, micro texture and matrix strain on the Charpy impact properties of low carbon HSLA steel containing MnS inclusions. Materials Science and Engineering A, 613 (IF-2.409). pp. 37-47.

Ghosh, A and Sahoo, S and Ghosh, M and Ghosh, R N and Chakrabarti, D (2014) Effect of microstructural parameters,micro texture and matrix strain on the Charpy impact properties of low carbon HSLA steel containing MnS inclusions. Materials Science and Engineering A, 613 (IF-2.409). pp. 37-47.

Baral, Jayashree and Swaminathan, J and Ghosh, R N (2013) Creep Behaviour of 9CrMoNbV (P91) Steel having a Small Amount of Boron. Procedia Engineering, 55 . pp. 88-92.

Das, Swapan K and Ghosh, R N and Sondhi, S K (2012) Prediction of carbide free layer formation in Fe-Ni Cr austentic steel process heater tube. Corrosion Engineering, Science and Technology, 47 (2). pp. 121-124.

Hore, S and Ghosh, R N (2011) Computer simulation of the high temperature creep behaviour of Cr–Mo steels. Materials Science and Engineering A, 528 (19-20). pp. 6095-6102.

Ray, Ashok K and Tiwari, Y N and Guguloth, K and Das, Goutam and Gunjan, M K and Bose, S C and Ghosh, R N (2011) Health assessment of 22 years service-exposed radiant tube from an oil refinery. Engineering Failure Analysis, 18 (3). pp. 1067-1075.

Roy, Rajat K and Ghosh, M and Panda, A K and Ghosh, R N and Mitra, A (2010) Development of rapidly solidified 6.5 wt% silicon steel for magnetic applications. Transactions of the Indian Institute of Metals, 63 (4). pp. 745-750.

Roy, Nilima and Bose, S C and Ghosh, R N (2010) Stochastic aspects of evolution of creep damage in austenitic stainless steel. Materials Science and Engineering: A, 527 (18-19). pp. 4810-4817.

Ravi Kumar, B and Das, Swapan K and Mahato, B and Ghosh, R N (2010) Role of strain-induced martensite on microstructural evolution during annealing of metastable austenitic stainless steel. Journal of Materials Science, 45 (4). pp. 911-918.

Sivaprasad, S and Narasaiah, N and Das, Swapan K and Das, Goutam and Tarafder, S and Gupta, K K and Ghosh, R N (2010) Investigation on the failure of air compressor. Engineering Failure Analysis, 17 (1). pp. 150-157.

Chaudhuri, S and Roy, Nilima and Ghosh, R N (2010) Assessment of creep and rupture behavior of 2.25Cr-1Mo steel — A strain based approach and its limitation. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 403-409.

Ghosh, M and Gunjan, M K and Das, Swapan K and Kar, Abhijit and Ghosh, R N and Ray, Ajoy K (2010) Effect of Mn on Sn–Ag–Cu ternary lead free solder alloy–Cu assembly: a comparative study. Materials Science and Technology, 26 (5). pp. 610-614.

Roy, Nilima and Ghosh, R N and Bose, S C (2010) A stochastic model for evolution of creep damage in engineering materials. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 665-669.

Roy, Rajat K and Panda, A K and Ghosh Chowdhury, S and Mitra, A and Ghosh, R N (2009) Effect of annealing treatment on soft magnetic properties of Fe–6.5 wt% Si wide ribbons. Journal of Magnetism and Magnetic Materials, 321 (18). pp. 2865-2870.

Chaudhuri, S and Ghosh, R N (2009) Creep Behavior Of 2.25cr1mo Steel-Effects Of Thermal Ageing And Pre-Strain. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing , 510-11 (sl. lss). pp. 136-141.

Sahu, J K and Krupp, U and Ghosh, R N and Christ, H J (2009) Effect of 475 °C embrittlement on the mechanical properties of duplex stainless steel. Materials Science and Engineering: A, 508 (1-2). pp. 1-14.

Pramanick, A K and Sinha, Arvind and Sastry, G V S and Ghosh, R N (2009) Near-grain-boundary characterization by atomic force microscopy. Ultramicroscopy, 109 (6). pp. 741-747.

Murthy, G V S and Anish, K and Jayakumar, T and Ghosh, R N (2009) Characterization Of Precipitation Behavior In Nimonic 263 By Ultrasonic Velocity Measurements. Review Of Progress In Quantitative Nondestructive Evaluation, Vols 28a And 28b , 1096 . pp. 1252-1258.

Sahu, J K and Ghosh, R N and Christ, H J (2009) Low cycle fatigue behaviour of duplex stainless steel: influence of isothermal aging treatment. Fatigue & Fracture of Engineering Materials & Structures, 33 (2). pp. 77-86.

Ravi Kumar, B and Das, Swapan K and Mahato, B and Ghosh, R N (2009) Role of strain-induced martensite on microstructural evolution during annealing of metastable austenitic stainless steel. Journal of Materials Science, 45 (4). pp. 911-918.

Swaminathan, J and Prasad, Prabha and Gunjan, M K and Guguloth, K and Roy, P K and Singh, Raghubir and Ghosh, R N (2008) Mechanical strength and microstructural observations for remaining life assessment of service exposed 24Ni–24Cr–1.5Nb cast austenitic steel reformer tubes. Engineering Failure Analysis , 15 (6). pp. 723-735.

Murthy, G V S and Ghosh, Sabita and Das, Mousumi and Das, Goutam and Ghosh, R N (2008) Correlation between ultrasonic velocity and indentation-based mechanical properties with microstructure in Nimonic 263. Materials Science and Engineering A, 488 (1-2). pp. 398-405.

Jindal, Vikas and Srivastava, V C and Ghosh, R N (2008) Development of IF steel–Al multilayer composite by repetitive roll bonding and annealing process. Materials Science and Technology, 24 (7). pp. 798-802.

Venkataraman, R and Singh, S Pabla and Venkataraman, B and Das, D K and Pathak, L C and Ghosh Chowdhury, S and Ghosh, R N and Ravichandra, D and Rao, G V Narasima and Nair, Keasavan and Kathirkar, Rajesh (2008) A scanning electron microscopic study to observe the changes in the growth morphology of the α phased Alumina–13 wt.% titania coatings during plasma spraying. Surface and Coatings Technology, 202 (21). pp. 5074-5083.

Swaminathan, J and Guguloth, K and Gunjan, M K and Roy, P K and Ghosh, R N (2008) Failure analysis and remaining life assessment of service exposed primary reformer heater tubes. Engineering Failure Analysis, 15 (4). pp. 311-331.

Palit Sagar, S and Ravi Kumar, B and Ghosh Chowdhury, S and De, P K and Ghosh, R N (2008) Determination of crystallographic texture in cold-rolled copper and stainless steel by spectrum analysis of ultrasonic signal. Scripta Materialia, 58 (7). pp. 595-598.

Bose, S C and Singh, Kulvir and Ray, Ashok K and Ghosh, R N (2008) Effect of thermal ageing on mechanical properties and microstructures of a standard G-X 12 CrMoVWNbN 1011 grade of cast steel for turbine casing. Materials Science and Engineering A, 476 (1-2). pp. 257-266.

Kar, Abhijit and Ghosh, M and Ghosh, R N and Majumdar, Bhaskar S and Ray, Ajoy K (2008) Evolution of mechanical and electrical properties of tin–lead and lead free solder to copper joint interface. Materials Letters, 62 (1). pp. 151-154.

Ray, Ashok K and Diwakar, K and Roy, Nilima and Das, H K and Sahu, J K and Ghosh, R N (2008) Creep behaviour and stress analysis of a seventeen-year service-exposed primary super heater tube in a thermal power plant. Canadian Metallurgical Quarterly, 47 (4). pp. 469-478.

Palit Sagar, S and Metya, Avijit Kumar and Parida, N and Ghosh, R N (2008) Nonlinear ultrasonic to assess localized plastic deformation during high cycle fatigue. Review Of Progress In Quantitative Nondestructive Evaluation, Vol 27a And 27b Book Series: AIP Conference Proceedings, 975 . pp. 1260-1266.

Ray, Ashok K and Diwakar, K and Sahu, J K and Das, H K and Roy, Nilima and Ghosh, R N (2008) Stress Analysis and Creep Behavior of Service Exposed Primary Superheater Tube in a Thermal Power Plant. High Temperature Materials And Processes, 27 (2). pp. 79-89.

Mitra, A and Mohapatra, J N and Swaminathan, J and Ghosh, M and Panda, A K and Ghosh, R N (2007) Magnetic evaluation of creep in modified 9Cr–1Mo steel. Scripta Materialia, 57 (9). pp. 813-816.

Kar, Abhijit and Ghosh, M and Majumdar, Bhaskar S and Ghosh, R N and Ray, Ajoy K (2007) Interfacial microstructure, shear strength and electrical conductivity of Sn-3 center dot 5Ag-o center dot 5In/Cu lead free soldered joints. Materials Technology, 32 (3). pp. 161-165.

Sahu, Puspendu and Hamada, A S and Ghosh, R N and Karjalainen, L P (2007) X-ray Diffraction Study on Cooling-Rate-Induced γfcc→εhcp Martensitic Transformation in Cast-Homogenized Fe-26Mn-0.14C Austenitic Steel. Metallurgical and Materials Transactions A, 38 (9). pp. 1991-2000.

Kar, Abhijit and Mandal, Sudipta and Ghosh, R N and Ghosh, T K and Ray, Ajoy K (2007) Role of Ti diffusion on the formation of phases in the Al2O3-Al2O3 brazed interface. Journal of Materials Science, 42 (14). pp. 5556-5561.

Kar, Abhijit and Ghosh, M and Ray, Ajoy K and Ghosh, R N (2007) Effect of copper addition on the microstructure and mechanical properties of lead free solder alloy. Materials Science and Engineering A, 459 (1-2). pp. 69-74.

Ray, Ashok K and Tiwari, Y N and Roy, P K and Chaudhuri, S and Bose, S C and Ghosh, R N and Whittenberger, J D (2007) Creep rupture analysis and remaining life assessment of 2.25Cr–1Mo steel tubes from a thermal power plant. Materials Science and Engineering A, 454-455 . pp. 679-684.

Ray, Ashok K and Diwakar, K and Prasad, B N and Tiwari, Y N and Ghosh, R N and Whittenberger, J D (2007) Long term creep–rupture behaviour of 813 K exposed 2.25–1Mo steel between 773 and 873 K. Materials Science and Engineering A, 454-455 . pp. 124-131.

Mohapatra, J N and Panda, A K and Gunjan, M K and Bandopadhyay, N R and Mitra, A and Ghosh, R N (2007) Ageing behavior study of 5Cr–0.5Mo steel by magnetic Barkhausen emissions and magnetic hysteresis loop techniques. NDT & E International, 40 (2). pp. 173-178.

Venkataraman, R and Das, Goutam and Singh, S R and Ghosh, R N and Venkataraman, B and Krishnamurty, R (2007) Study on influence of porosity, pore size, spatial and topological distribution of pores on microhardness of as plasma sprayed ceramic coatings. Materials Science and Engineering A, 445-446 . pp. 269-274.

Ghosh Chowdhury, S and Datta, Sudarsan and Ravi Kumar, B and De, P K and Ghosh, R N (2007) Randomization of texture during recrystallization of austenite in a cold rolled metastable austenitic stainless steel. Materials Science and Engineering A, 443 (1-2). pp. 114-119.

Das, Goutam and Chakravarty, S and Datta, A K and Das, Swapan K and Gupta, K K and Ghosh, R N (2006) Failure analysis of a high mast lamp post. Engineering Failure Analysis, 13 (7). pp. 1153-1158.

Jindal, Vikas and Srivastava, V C and Das, Arpan and Ghosh, R N (2006) Reactive diffusion in the roll bonded iron–aluminum system. Materials Letters, 60 (13-14). pp. 1758-1761.

Ray, Ashok K and Singh, S R and Swaminathan, J and Roy, P K and Tiwari, Y N and Bose, S C and Ghosh, R N (2006) Structure property correlation study of a service exposed first stage turbine blade in a power plant. Materials Science and Engineering A, 419 (1-2). pp. 225-232.

Das, Goutam and Ghosh, Sabita and Ghosh, Sukomal and Ghosh, R N (2005) Materials characterization and classification on the basis of materials pile-up surrounding the indentation. Materials Science and Engineering A, 408 (1-2). pp. 158-164.

Ray, Ashok K and Das, D K and Venkataraman, B and Roy , P K and Goswami, B and Roy, Nilima and Das, S K and Parida, N and Tarafder, S and Chaudhuri, S and Sahay, S K and Ghosh, R N (2005) Characterization of rupture and fatigue resistance of TBC superalloy for combustion liners. Materials Science and Engineering A, 405 (1-2). pp. 194-200.

Ray, Ashok K and Singh, S R and Kailath, A J and Roy, P K and Das, Swapan K and Ghosh, R N (2005) Fatigue and creep damage and its correlation with microstructure of a service exposed first stage turbine blade in a power plant. Journal of Metallurgy and Materials Science, 47 (2). pp. 59-69.

Banerjee, K and Roy, Nilima and Ghosh, R N and Chatterjee, U S (2004) Strain rate dependence of plastic flow behaviour of HSLA-100 steel in seawater during cathodic charging of hydrogen. Transactions of the Indian Institute of Metals, 57 (6). pp. 611-616.

Venkateswarlu, K and Pathak, L C and Ray, Ajoy K and Das, Goutam and Verma, P K and Kumar, M and Ghosh, R N (2004) Microstructure, tensile strength and wear behaviour of Al–Sc alloy. Materials Science and Engineering A, 383 (2). pp. 374-380.

Ray, Ashok K and Das, Goutam and Ranganath, V R and Goswami, B and Ghosh, R N (2004) Failure of connecting pins of a compressor disc in an aero engine. Engineering Failure Analysis, 11 (4). pp. 613-617.

Ray, A K and Tarafder, S and Das, D K and Venkatraman, B and Roy, P K and Goswami, B and Tiwari, Y N and Palit Sagar, S and Ranganath, V R and Das, Goutam and Chaudhuri, S and Ghosh, R N (2004) Damage resistance of thermal barrier coated superalloy in combustion chamber liner. Journal of Metallurgy and Materials Science, 46 (4). pp. 205-212.

Ray, Ajoy K and Tiwari, Y N and Chaudhuri, S and Ranganath, V R and Sivaprasad, S and Roy, P K and Das, Goutam and Ghosh Chowdhury, S and Kumar, P and Ghosh, R N (2002) Remaining life assessment of service exposed reheater and superheater tubes in a boiler of a thermal power plant. Engineering Failure Analysis , 21 (1-2). pp. 109-121.

Ray, Ashok K and Tiwari, Y N and Chaudhuri, S and Ranganath, V R and Sivaprasad, S and Roy, P K and Das, Goutam and Ghosh, Sabita and Kumar, P and Ghosh, R N (2002) Remaining life assessment of service exposed reheater and superheater tubes in a boiler of a thermal power plant. High Temperature Materials and Processes, 21 (1-2). pp. 109-121.

Basoalto, H C and Ardakani, M and Ghosh, R N and Mclean, M (2002) Multiaxial lifetime predictions of single-crystal superalloys: Use of reference stresses. Materials and Manufacturing Processes, 17 (4 (Special Issue)). pp. 519-528.

Venkatrama, M and Mohanty, O N and Ghosh, R N (2001) Modelling of transformation kinetics in HSLA 100 steel during continuous cooling. Scandinavian Journal Of Metallurgy, 30 (1). pp. 8-13.

Roy, Nilima and Ghosh, R N and Pandey, M C (2001) Modelling of interaction between creep and oxditaion behaviour for engineering materials. ISIJ International, 41 (8). pp. 915-921.

Chaudhuri, S and Roy, Nilima and Ghosh, R N (2000) Stress rupture ductility diagram - A diagnostic tool. ISIJ International, 40 (2). pp. 207-210.

Das, N and Pandey, M C and Ghosh, R N (1998) High temperature creep behaviour of single crystal superalloy. Material Science and Technology, 14 (5). pp. 429-434.

Chaudhuri, S and Ghosh, R N (1998) Some aspects of mechanisms and modelling of creep behaviour of 2.25Cr-1Mo steel. ISIJ International, 38 (8). pp. 881-887.

Roy, Nilima and Ghosh, R N (1997) Modelling effects of specimen size and shape on creep of metals and alloys. Scripta Materialia, 36 (12). pp. 1367-1372.

Chattoraj, I and Joarder, A and Bhattamishra, A K and Bhattacharya, D K and Ghosh, R N (1997) Crevice attack of a boiler steam drum. Canadian Metallurgical Quarterly, 36 (2). pp. 143-148.

Tarafder, Mita and Tarafder, S and Ranganath, V R and Ghosh, R N (1997) Finite element solutions for stress intensity factors in longitudinally cracked cylindrical components. International Journal of Pressure Vessels and Piping, 70 (2). pp. 127-133.

Chattopadhyay, Lalitha and Ghosh, R N (1996) Clip: Computer software for creep life prediction of engineering materials. Engineering Fracture Mechanics, 54 (1). pp. 71-73.

Ghosh, R N and Chaudhuri, S and Roy, Nilima and Chattopadhyay, Lalitha (1995) Creep life extension of high-temperature components under wall thinning conditions. Sadhana-Academy Proceedings in Engineering Sciences, 20 ( ). pp. 331-339.

Tarafder, Mita and Ranganath, V R and Tarafder, S and Ghosh, R N (1995) Fatigue life prediction software for engineering components. NML Technical Journal, 37 (2). pp. 43-52.

Ghosh, R N (1994) Modeling high-temperature creep of anisotropic material. Bulletin of Materials Science, 17 (7). pp. 1341-1350.

Ghosh, R N and Chaudhuri, S (1994) Creep strain prediction of 2-1/4-cr-1mo steel - a model-based approach. Bulletin of Materials Science, 17 (6). pp. 663-670.

Pan, L M and Ghosh, R N and MClean, M (1993) Extension of an anisotropic creep model to general high-temperature deformation of a single-crystal superalloy. Journal de Physique IV - Proceedings, 3 (C7). pp. 629-634.

Das, S K and Biswas, A and Ghosh, R N (1993) Volume fraction dependent particle coarsening in plain carbon steel. Acta Metallurgica et Materialia, 41 (3). pp. 777-781.

Chaudhuri, S and Roy, Nilima and Ghosh, R N (1993) Modelling high temperature creep of Cr---Mo steel. Acta Metallurgica et Materialia, 41 (1). pp. 273-278.

Ghosh, R N and Mclean, M (1992) High-temperature deformation in engineering alloys - modeling for strain or load control. Acta metallurgica et materialia, 40 (11). pp. 3075-3083.

Ghosh, R N and Curtis, R V and MClean, M (1990) Creep deformation of single-crystal superalloys - modeling the crystallographic anisotropy. Acta Metallurgicaet Materiala, 38 (10). pp. 1977-1992.

Lalitha, S and Chattopadhyay, S and Ghosh, R N (1990) Development of software on finite-element mesh generation (meshgen) for metallurgical applications. Engineering Fracture Mechanics, 36 (3). pp. 527-530.

Ghosh, R N and Mclean, M (1989) Modelling the orientation dependence of tertiary creep in single crystal superalloys. Scripta Metallurgica, 23 (8). pp. 1301-1306.

Ghosh, R N and Singh, R and Kumar, R (1985) An analysis of tertiary creep in Cr---1 Mo steel. Scripta Metallurgica, 19 (7). pp. 801-804.

Ghosh, R N and Singh, Raghubir and Kumar, Rajendra (1985) An analysis of tertiary creep in 2(1/4) Cr-1 Mo-steel. Scripta metallurgica, 19 (7). pp. 801-804.

Ghosh, R N and Mitra, A (1983) Computer simulation of high temperature creep recovery and work hardening rate measurement techniques. Metal Science, 17 (12). pp. 590-600.

Book or NML Publication

Sahu, J K and Swaminathan, J and Sivaprasad, S and Ray, Ajoy K and Tarafder, S and Chaudhuri, S and Ghosh, R N (2008) Use of expert system software for life monitoring of power plant components. In: Remaining Life Assessment of aged Components in Thermal Power Plants & Petrochemical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 169-181. ISBN 81-87053-73-1

Conference or Workshop Item

Guguloth, K and Swaminathan, J and Ghosh, R N (2014) Creep life predicition of P91 Steel from stress relaxation tests. In: ECCC Creep & Fracture 2014, May 5-7, 2014, Rome, Italy.

Swaminathan, J and Das, C R and Baral, Jayashree and Phaniraj, C and Ghosh, R N and Albert, S K and Bhaduri, A K (2014) Creep strength behavior of boron added P91 steel and its weld in the temperature range of 600–650 degree C. In: Energy Materials Conference proceedings 2014, November 4-6, 2014, Xi'an Shaanxi Provice, China.

Bose, S C and Roy, Nilima and Ghosh, R N (2009) Probabilistic creep life assessment of austenitic stainless steel. In: NMD - ATM 2009, November 14, 2009 to November 17, 2009, Science City Complex,Kolkata, India.

Chaudhuri, S and Roy, Nilima and Ghosh, R N (2008) Assessment of creep and rupture behavior of 2.25Cr-1Mo steel – A strain-based approach and its limitation. In: 5th International Conference on Creep, Fatigue and Creep-Fatigue Interaction, September 24-26, 2008, Kalpakkam.

Ghosh, R N and Das, S K and Mitra, A (2008) Damage assessment of process heater tube. In: UNSPECIFIED.

Ghosh, M and Kar, Abhijit and Ghosh, R N and Ray, Ajoy K (2008) A comparative study on the ageing behaviour of solder alloy-cu joint assemly using lead free solder and Sn-Pb eutectic solder alloy. In: The 3rd Asian Thermal Spray Conference (ATSC 2008), 2008, Singapore.

Kar, Abhijit and Ghosh, M and Ghosh, R N and Ray, Ajoy K (2007) Comparative study of tin lead and lead free solder joint interface. In: 2 nd International Conference on Recent Advances in Composite Materials (ICRACM-2007), February, 20-23, 2007, New Delhi.

Ghosh, R N (2003) Identification of Novelty in R&D. In: UNSPECIFIED.

Ghosh, R N (2002) Superalloy: Processing and Performance. In: Proceedings of the Indo-Malaysian Joint Workshop (WAM-2002), 12-13 March, 2002, National Metallurgical Laboratory, Jamshedpur.

Ghosh, R N (2001) Remaining Life Assessment of Engineering Components. In: UNSPECIFIED.

Ghosh, R N (2001) Remaining life assessment of engineering components. In: UNSPECIFIED.

Ghosh, R N (1997) Failure analysis: techniques and few case studies. In: UNSPECIFIED.

Ghosh, R N (1997) Structural and component integrity. In: UNSPECIFIED.

Ghosh, R N (1996) Creep life prediction of single crystal superalloys. In: Proceedings of the National Seminar on Computer Applications in Materials and Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Ghosh, R N (1995) Basic Principles of Physical Metallurgy. In: Experimental Techniques in Industrial Metallography [ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR), Jamshedpur.

Ghosh, R N (1995) Boiler Corrosion - Metallurgical Aspect. In: Proceedings of the National Workshop on Boiler Corrosion(NWBC-95), April 11-12, 1995, NML, Jamshedpur.

Ghosh, R N (1994) Physical Metallurgy of Steel - Basic Principles. In: Workshop on Heat Treatment & Surface Engineering of Iron & Steels (HTIS-94), May 11-13, 1994, NML, Jamshedpur.

Ghosh , R N (1990) Some Aspects of Modelling of the High Temperature Mechanical Behaviour of Nickel Base Superalloys. In: Workshop on Modelling of Metallurgical Processes, 23/01/1990, Jamshedepur.

Ghosh, R N (1957) Welding of Non-Ferrous Metals. In: UNSPECIFIED.

Project Reports

Roy, Nilima and Ghosh, R N and Dash, Byomkesh and Sivaprasad, S and Tarafder, S (2008) Software development for Critical Assessment of High Temperature Engineering components. Other (TMP). CSIR-NML, Jamshdpur. (Submitted)

Ghosh Chowdhury, S and Das, Goutam and Das, Swapan K and Sivaprasad, S and Singh, S R and Ghosh, R N (2007) Failure Analysis of LP turbine free standing blade. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Sahu, P and Singh, S R and Mahato, B and Ghosh Chowdhury, S and Ravi Kumar, B and Das, Swapan K and Ghosh, R N (2007) y-y' Lattice misfit and its influence on the microstru-cture of UDIMET 520 during the rejevenation heat treatment : an X-ray diffraction study. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Ghosh, R N (2007) NDE Centre for Infrastructure Asset Management. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted)

Bar, H N and Parida, N and Palit Sagar, S and Ghosh, R N (2007) Evaluation of Prototype Horton Sphere using Acoustic Emission. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Ghosh, R N and Vaish, A K and Singh, S R and Ghosh Chowdhury, S and Humane, M M and De, P K and Minj, R K and Kumar, B Ravi (2007) High Strength Formable Steels for Automobile Applications. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted)

Roy, Nilima and Ghosh, R N and Bose, S C and Swaminathan, J (2007) A Stochastic Model for Assessment of Creep damage. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

Rupa, P K P and Mishra, Suman K and Pathak, L C and Ghosh, R N (2007) Nanoindentation Studies of TiB2 films. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Palit Sagar, S and Ghosh Chowdhury, S and Ravi Kumar, B and De, P K and Parida, N and Ghosh, R N (2006) Crystallographic Texture determination in deformed materials by Ultrasonic Technique. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Sahu, J K and Singh, S R and Das, Samar and Sivaprasad, S and Tarafder, S and Ghosh, R N (2006) Deformation mechanism in a single phase austenitic and ferrito-austenitic stainless steel. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Jindal, Vikas and Srivastava, V C and Mishra, Suman K and Das, Goutam and Ghosh, R N (2006) Study of Structural Evaluation and Mechanical properties of IF Steel and Aluminium sheets processed by ARB process. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Srivastava, V C and Mishra, Suman K and Das, Goutam and Ghosh, R N (2006) Study of Structural Evaluation and Mechanical properties of IF Steel and Aluminium sheets processes by ARB process. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

This list was generated on Thu Dec 12 06:07:55 2019 IST.