Items where Author is "Ghosh, M"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 109.

Article

Ravikiran, K and Das, Goutam and Kumar, S and Singh, P K and Sivaprasad, K and Ghosh, M (2019) Narrow gap welding of low alloy and austenitic stainless steels using different Inconel alloys: comparison of microstructure and properties. Materials Research Express, 6(9) .

Ravikiran, K and Das, G and Kumar, S and Sivaprasad, K and Ghosh, M (2019) Evaluation of Microstructure at Interfaces of Welded Joint Between Low Alloy Steel and Stainless Steel. Metallurgical and Materials Transactions A (50(6)). pp. 2784-2797.

Sahu, B K and Tripathy, S and Ghosh, M and Das, Swapan K and Das, Goutam (2019) Investigation of Premature Failure of a Coal-Fired Boiler Superheater Tube. Journal of Failure Analysis and Prevention, 19(3) . pp. 792-801.

Ghosh, A and Sahu, M and Singh, P K and Kumar, S and Ghosh, M and Sagar, S P (2019) Assessment of Mechanical Properties for Dissimilar Metal Welds: A Nondestructive Approach. Journal of Materials Engineering And Performance, 28(2) . pp. 900-907.

Chandan, A.K. and Tripathy, S and Ghosh, M and Ghosh Chowdhury, S (2019) Evolution of Substructure of a Non-equiatomic FeMnCrCo High Entropy Alloy Deformed at Ambient Temperature. Metallurgical and Materials Transactions A . pp. 1-12.

Ravikiran, K and Das, Goutam and Kumar, Suranjit and Singh, PK and Shivaprasd, K and Ghosh, M (2019) Narrow gap welding of low alloy and austenitic stainless steels using different Inconel alloys: comparison of microstructure and properties. Materials Research Express, 6 (9) .

Barat, K and Ghosh, M and Sivaprasad, S and Kar, S K and Tarafder, S (2018) High-Temperature Low-Cycle Fatigue Behavior in HAYNES 282: Influence of Initial Microstructure. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, 49(10) (IF-1.985). pp. 5211-5226.

Santosh, R and Das, Goutam and Kumar, S and Singh, P K and Ghosh, M (2018) Experimental and Computational Investigation of Structural Integrity of Dissimilar Metal Weld Between Ferritic and Austenitic Steel. Metallurgical and Materials Transactions A, 49A(6) (IF-1.874). pp. 2099-2112.

Naseema, S and Gaurav, B and Ghosh, M and Das, Goutam and Srivastava, V C and Srinivas , Rao K and Gopalakrishna, K (2018) TEM Analysis of Precipitates in a Low Alloy Wear Resistant Steel and Correlating with its Corrosion Behaviour. Advanced Materials Research, 1148 (1148). pp. 75-81.

Pramanick, AK and Das, H and Reddy, GM and Ghosh, M and Nandy, S and Pal, TK (2018) Effect of Bainitic Microstructure on Ballistic Performance of Armour Steel Weld Metal Using Developed High Ni-Coated Electrode. Journal of Materials Engineering and Peformance .

Roy, Nilima and Bhardwaj, A and Kujur, A and Ghosh, M and Singh, R and Meena, L K and Das, Goutam and Chattoraj, I (2018) Effect of heterogeneities on pitting potential of line pipe steels: An adaptive neuro-fuzzy approach. Corrosion science, 133 (IF-5.245). pp. 327-335.

Husain, M M and Ghosh, M and Sarkar, R and Pal, T K and Prabhu, N (2018) Conventional and in situ tensile test of friction stir welded steel – Optimization of processing parameters. Materialwiss. Werkstofftech, 49 (IF-0.393). pp. 991-1005.

Dey, Sushmita and Roy, Rajat K and Ghosh, M and Mallick, A Basu and Mitra, A and Panda, A K (2017) Enhancement in magnetocaloric properties of NiMnGa alloy through stoichiometric tuned phase transformation and magneto-thermal transitions. Journal of Magnetism and Magnetic Materials, 439 (IF-2.630). pp. 305-311.

Ghosh, M and Bansal, Gourav and Chandan, A and Shah, Minal and Tripathy, S and Murugaiyan, Premkumar and Sahoo, Biraj and Mukherjee, K and Srivastava, V C and Ghosh Chowdhury, S (2017) Functionally Driven Steels: A Review. Steel Tech, 12(1) (NonSCI). pp. 13-36.

Husain, M M and Sarkar, R and Pal, T K and Ghosh, M and Prabhu, N (2017) Quantification of Microtexture at Weld Nugget of Friction Stir-Welded Carbon Steel. Journal of Materials Engineering and Performance , 26(5) (IF-1.331). pp. 2047-2056.

Das, Anindya and Ghosh, M and Tarafder, S and Chakrabarti, D (2017) Micromechanisms of deformation in dual phase steels at high strain rates. Material Science and Engineering A Structural Materials Properties Microstructure and Processing, 680 (IF-3.094). pp. 249-258.

Nivas, R and Singh, P K and Das, Goutam and Das, S K and Kumar, S and Mahato, B and Sivaprasad, K and Ghosh, M (2017) A comparative study on microstructure and mechanical properties near interface for dissimilar materials during conventional V-groove and narrow gap welding. Journal of Manufacturing Processes, 25 (IF-2.322). pp. 274-283.

Nivas, R and Das, Goutam and Das, S K and Mahato, B and Kumar, Sanjay and Sivaprasad, K and Singh, P K and Ghosh, M (2017) Effect of Stress Relief Annealing on Microstructure & Mechanical Properties of Welded Joints Between Low Alloy Carbon Steel and Stainless Steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 48 A(1) (IF-1.874). pp. 230-245.

Pramanick, A K and Das, Goutam and Das, Swapan K and Ghosh, M (2017) Failure investigation of super heater tubes of coal fired power plant. Case Studies in Engineering Failure Analysis, 9 . pp. 17-26.

Santosh, R and Singh, P K and Das, Goutam and Korody, J and Das, S K and Kumar, S and Ghosh, M (2016) Effect of different parameters on uncertainty during evaluation of strength of dissimilar metal weld. Materialwissenschaft und Werkstofftechnik, 47(9) (IF-0.524). pp. 845-851.

Santosh, R and Das, Swapan K and Das, Goutam and Korody, J and Kumar, S and Singh, P K and Ghosh, M (2016) Three-Dimensional Thermomechanical Simulation and Experimental Validation on Failure of Dissimilar Material Welds. Metallurgical and Materials Transactions A, 47A(7) (IF-1.874). pp. 3511-3521.

Pramanick, Ajit Kumar and Das, H and Reddy, G M and Ghosh, M and Das, Goutam and Nandy, S and Pal, T K (2016) Development and design of microstructure based coated electrode for ballistic performance of shielded metal arc welded armour steel joints. Materials & Design, 103 (IF 4.364). pp. 52-62.

Dey, Sushmita and Singh, Satnam and Roy, Rajat K and Ghosh, M and Mitra, A and Panda, A K (2016) Influence of Mn incorporation for Ni on the magnetocaloric properties of rapidly solidified off-stoichiometric NiMnGa ribbons. Journal of Magnetism and Magnetic Materials, 397 (IF-2.630). pp. 342-346.

Husain, M M and Sarkar, R and Pal, T K and Prabhu, N and Ghosh, M (2015) Friction Stir Welding of Steel: Heat Input, Microstructure, and Mechanical Property Co-relation. Journal of Materials Engineering and Performance, 24 (IF-0.998). pp. 3673-3683.

Metya, Avijit Kr and Ghosh, M and Parida, N and Balasubramaniam, Krishnan (2015) Effect of tempering temperatures on nonlinear Lamb wave signal of modified 9Cr–1Mo steel. Materials Characterization, 107 . pp. 14-22.

Ghosh, M and Santosh, R and Das, Swapan K and Das, Goutam and Mahato, B and Korody, J and Kumar, S and Singh, P K (2015) Effect of Structural Heterogeneity on In Situ Deformation of Dissimilar Weld Between Ferritic and Austenitic Steel. Metallurgical and Materials Transactions A, 46A (IF-1.730). pp. 3555-3568.

Bhattacharya, Soumya and Mishra, Swati and Gupta, P and Pranav, P and Ghosh, M and Pramanick, A K and Mishra, D P and Nayar, S (2015) Liquid phase collagen modified graphene that induces apoptosis. RSC Advances, 5(55) (IF-3.84). pp. 44447-44457.

Das, Tuhin and Saha, Rajib and Bera, Supriya and Dahmen, Kirsten and Ghosh, M and Haldar, A and Bleck, Wolfgang and Ghosh Chowdhury, S (2015) Effect of High Tensile Strain Rate on the Evolution of Microstructure in Fe-Mn-C-Al Twinning-Induced Plasticity (TWIP) Steel. Metallurgical and Materials Transactions A, 46A (1) (IF-1.730). pp. 6-11.

Bhattacharya, S and Sheikh, Lubna and Tiwari, V and Ghosh, M and Patel, J N and Patel, A B and Nayar, S (2014) Protein-Polymer Functionalized Aqueous Ferrofluids Showing High T2 Relaxivity. Journal of Biomedical Nanotechnology, 10(5) (IF-7.578). pp. 811-819.

Mandal, D and Ghosh, M and Pal, J and Ghosh Chowdhury, S and Das, Goutam and Das, Swapan K and Ghosh, Sukomal (2014) Evolution of microstructure and mechanical properties under different austempering holding time of cast Fe–1.5Si–1.5Mn–V steels. Materials & Design, 54 (IF-3.171). pp. 831-837.

Chakraborty, J and Maiti, Tias and Ghosh, M and Das, Goutam and Chandra, Sanjay (2014) Cementite dissolution in cold drawn pearlitic steel wires: role of dislocations. International Confrence on Residual Stresses 9 (ICRS9), 768-769 . pp. 304-312.

Singh, Satnam and Roy, R K and Mahato, B and Ghosh, M and Mitra, A and Panda , A K (2014) Effect of Al incorporation for Co on the gamma-beta phase boundary of rapidly solidified CoNiAl ferromagnetic shape memory alloys. Journal of Magnetism and Magnetic Materials, 368 (IF-2.002). pp. 379-383.

Ghosh, A and Sahoo, S and Ghosh, M and Ghosh, R N and Chakrabarti, D (2014) Effect of microstructural parameters, micro texture and matrix strain on the Charpy impact properties of low carbon HSLA steel containing MnS inclusions. Materials Science and Engineering A, 613 (IF-2.409). pp. 37-47.

Ghosh, A and Sahoo, S and Ghosh, M and Ghosh, R N and Chakrabarti, D (2014) Effect of microstructural parameters,micro texture and matrix strain on the Charpy impact properties of low carbon HSLA steel containing MnS inclusions. Materials Science and Engineering A, 613 (IF-2.409). pp. 37-47.

Ghosh, M and Gupta, R K and Husain, M M (2014) Friction Stir Welding of Stainless Steel to Al Alloy: Effect of Thermal Condition on Weld Nugget Microstructure. Metallurgical & Materials Transactions A, 45A (IF-1.730). pp. 854-863.

Ghosh, M and Barat, K and Das, Swapan K and Ravi Kumar, B and Pramanick, A K and Chakraborty, J and Das , Goutam and Hadas, S and Bharathy, S and Ray , S K (2014) Variation in Mechanical Properties and Heterogeneity in Microstructure of High-Strength Ferritic Steel During Mill Trial. Metallurgical Transaction A, 45A (IF-1.730). pp. 2719-2731.

Chakraborty, J and Ghosh, M and Ranjan, R and Das, Goutam and Das, D and Chandra, Sanjay (2013) X-ray diffraction and Mossbauer spectroscopy studies of cementite dissolution in cold-drawn pearlitic steel. Philosophical Magazine, 93(36) . pp. 4598-4616.

Ghosh, M and Kumar, Rajneesh and Husain, M M (2013) Friction Stir Welding of Stainless Steel to Al Alloy: Effect of Thermal Condition on Weld Nugget Microstructure. Metallurgical & Materials Transaction A (IF-1.738).

Ghosh, M and Husain, M M and Kumar, K and Kailas, S V (2013) Friction Stir-Welded Dissimilar Aluminum Alloys: Microstructure, Mechanical Properties, and Physical State. Journal of Materials Engineering and Performance , 22(12) (IF-0.915). pp. 3890-3901.

Singh, Satnam and Roy, P K and Ghosh, M and Mitra, A and Panda, A K (2013) Martensitic transformation and magneto-strain in melt spun NiMnGaAl Ferromagnetic Shape Memory Alloys. Intermetallics, 43 (IF-1.857). pp. 147-151.

Singh, Satnam and Roy, Rajat K and Ghosh, M and Manik, N B and Mitra, A and Panda, A K (2013) Modification in martensite morphology and magneto-strain through rapid solidification and heat treatment of NiMnGaAl alloy. Journal of Magnetism and Magnetic Materials, 343 (IF-1.826). pp. 169-172.

Husain, M M and Ghosh, M (2013) Inhibition of intermetallic formation during diffusion bonding of high-carbon steel. International Journal of Advanced Manufacturing Technology, 66 (9-12) . pp. 1871-1877.

Karmakar, A and Ghosh, M and Chakrabarti, D (2013) Cold-rolling and inter-critical annealing of low-carbon steel: Effect of initial microstructure and heating-rate. Materials Science & Engineering A, 564 (IF-2.108). pp. 389-399.

Singh, Raghuvir and Kumar, Mukesh and Ghosh, M and Das, Goutam and Singh, P K and Chattoraj, I (2013) Intergranular Corrosion Behavior of 304LN Stainless Steel Heat Treated at 623 K (350 degrees C). Metallurgical and Materials Transactions A-Physical Metallurgy and Materials and Materials Science, 44A (IF-1.627). pp. 173-187.

Singh, S and Roy, Rajat K and Ghosh, M and Mitra , A and Panda, A K (2012) Heat Treatment Induced Martensitic Accommodation and Adaptive Anisotropy in Melt Spun Ni55Mn22Ga23 (at.%) ribbons. Journal of Applied Physics, 112(10) .

Ray, Ajoy K and Sahu, Ranjan K and Rajinikanth, V and Bapari, H and Ghosh, M and Paul, Parimal (2012) Preparation and characterization of graphene and Ni-decorated graphene using flower petals as the precursor material. Carbon, 50 (11). pp. 4123-4129.

Palit Sagar, S and Miyasaka, C and Ghosh, M and Tittmann, B R (2012) NDE of friction stir welds of Al alloys using high-frequency acoustic microscopy. Non-destructive Testing and Evaluation, 27(4) (IF-0.827). pp. 375-389.

Ghosh, M and Kar, Abhijit and Kumar, K and Kailas, S V (2012) Structural characterisation of reaction zone for friction stir welded aluminium–stainless steel joint. Materials Technology, 27 (2). pp. 169-172.

Ghosh, M and Husain, M M and Gupta, R K (2012) Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Plain Carbon Steel. ISIJ International, 52 (3). pp. 477-482.

Das, Mousumi and Das, Goutam and Ghosh, M and Wegner, Matthias and Rajinikanth, V and Ghosh Chowdhury, S and Pal, T K (2012) Microstructures and mechanical properties of HPT processed 6063 Al alloy. Materials Science and Engineering A, 558 (IF-2.108). pp. 525-532.

Ghosh, M and Kumar, K and Mishra, R S (2012) Process Optimization for Friction-Stir-Welded Martensitic Steel. Metallurgical & Materials Transactions A, 43A . pp. 1966-1975.

Panda, A K and Singh, Satnam and Roy, Rajat K and Ghosh, M and Mitra, A (2011) Effect of Mn incorporation for Ni on the properties of melt spun off-stoichiometric compositions of NiMnGa alloys. Journal of Magnetism and Magnetic Materials, 323 (9). pp. 1161-1169.

Palit Sagar, S and Metya, Avijit Kumar and Ghosh, M and Sivaprasad, S (2011) Effect of microstructure on non-linear behavior of ultrasound during low cycle fatigue of pearlitic steels. Materials Science and Engineering A, 528 (6). pp. 2895-2898.

Ghosh, M and Kumar, K and Mishra, R S (2011) Friction stir lap welded advanced high strength steels: Microstructure and mechanical properties. Materials Science and Engineering A, 528 . pp. 8111-8119.

Ghosh, M and Kumar, K and Mishra, R S (2010) Analysis of microstructural evolution during friction stir welding of ultrahigh-strength steel. Scripta Materialia, 63 (8). pp. 851-854.

Roy, Rajat K and Ghosh, M and Panda, A K and Ghosh, R N and Mitra, A (2010) Development of rapidly solidified 6.5 wt% silicon steel for magnetic applications. Transactions of the Indian Institute of Metals, 63 (4). pp. 745-750.

Ghosh, M and Kumar, K and Kailas, S V and Ray, Ajoy K (2010) Optimization of friction stir welding parameters for dissimilar aluminum alloys. Materials & Design, 31 (6). pp. 3033-3037.

Ghosh, M and Gunjan, M K and Das, Swapan K and Kar, Abhijit and Ghosh, R N and Ray, Ajoy K (2010) Effect of Mn on Sn–Ag–Cu ternary lead free solder alloy–Cu assembly: a comparative study. Materials Science and Technology, 26 (5). pp. 610-614.

Ghosh, M and Kar, Abhijit and Das, Swapan K and Ray, Ajoy K (2009) Aging Characteristics of Sn-Ag Eutectic Solder Alloy with the Addition of Cu, In, and Mn. Metallurgical and Materials Transactions A, 40A . pp. 2369-2376.

Panda, A K and Mohanta, Ojaswini and Ghosh, M and Mitra, A (2009) Development of Nanostructured CoFe-Based Alloys for High Temperature Magnetic Applications. Journal Of Nanoscience And Nanotechnology, 9 (9). pp. 5600-5603.

Parmar, Kavita and Chaturvedi, Hema T and Akhtar, Md Wasi and Chakravarty, S and Das, S K and Pramanick, A K and Ghosh, M and Panda, A K and Bandopadhyay, N R and Bhattacharjee, S (2009) Characterization of cobalt precipitation tube synthesized through “silica garden” route. Materials Characterization, 60 (8). pp. 863-868.

Mohanta, Ojaswini and Ghosh, M and Mitra, A and Panda, A K (2009) Enhanced ferromagnetic ordering through nanocrystallization in cobalt incorporated FeSiBNb alloys. Journal Of Physics D-Applied Physics , 42 (6). 065007.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, S (2009) Effect of austempering treatment on microstructure and mechanical properties of high-Si steel. Journal of Materials Science, 44 (4). pp. 1069-1075.

Kar, Abhijit and Ghosh, M and Ray, Ashok K and Ray, Ajoy K (2008) Effect of interfacial thickness and residual stress on the mechanical property of the alumina–stainless steel braze joint interface. Materials Science and Engineering A, 498 (1-2). pp. 283-288.

Metya, Avijit Kumar and Ghosh, M and Parida, N and Palit Sagar, S (2008) Higher harmonic analysis of ultrasonic signal for ageing behaviour study of C-250 grade maraging steel. NDT & E International, 41 (6). pp. 484-489.

Panda, A K and Ghosh, M and Kumar, Arvind and Mitra, A (2008) Magnetic transitions and structure of a NiMnGa ferromagnetic shape memory alloy prepared by melt spinning technique. Journal of Magnetism and Magnetic Materials, 320 (17). pp. 116-120.

Das, Arpan and Sivaprasad, S and Ghosh, M and Chakraborti, P C and Tarafder, S (2008) Morphologies and characteristics of deformation induced martensite during tensile deformation of 304 LN stainless steel. Materials Science and Engineering A, 486 (1-2). pp. 283-286.

Venkateswarlu, K and Ghosh, M and Ray, Ajoy K and Xu, Cheng and Langdon, T G (2008) On the feasibility of using a continuous processing technique incorporating a limited strain imposed by ECAP. Materials Science and Engineering: A, 485 (1-2). pp. 476-480.

Sahoo, K L and Sahu, Rina and Ghosh, M and Chatterjee, S (2008) Studies on crystallization behaviour and mechanical properties of Al-Ni-La metallic glasses. Bulletin of Materials Science, 31 (3). pp. 433-439.

Metya, A and Ghosh, M and Parida, N and Palit Sagar, S (2008) Higher harmonic analysis of ultrasonic signal for ageing behaviour study of C-250 grade maraging steel. NDT & E International, 41 . pp. 484-489.

Kar, Abhijit and Ghosh, M and Ghosh, R N and Majumdar, Bhaskar S and Ray, Ajoy K (2008) Evolution of mechanical and electrical properties of tin–lead and lead free solder to copper joint interface. Materials Letters, 62 (1). pp. 151-154.

Panda, A K and Kumar, Arvind and Ghosh, M and Mitra, A (2008) Development of Ni-Mn-Ga-based ferromagnetic shape memory alloy by rapid solidification route. Journal of Magnetism and Magnetic Materials, 320 (20). pp. 730-733.

Mitra, A and Mohapatra, J N and Swaminathan, J and Ghosh, M and Panda, A K and Ghosh, R N (2007) Magnetic evaluation of creep in modified 9Cr–1Mo steel. Scripta Materialia, 57 (9). pp. 813-816.

Kar, Abhijit and Ghosh, M and Majumdar, Bhaskar S and Ghosh, R N and Ray, Ajoy K (2007) Interfacial microstructure, shear strength and electrical conductivity of Sn-3 center dot 5Ag-o center dot 5In/Cu lead free soldered joints. Materials Technology, 32 (3). pp. 161-165.

Rajinikanth, V and Jindal, Vikas and Akkimardi, V G and Ghosh, M and Venkateswarlu, K (2007) Transmission electron microscopy studies on the effect of strain on Al and Al–1% Sc alloy. Scripta Materialia, 57 (5). pp. 425-428.

Kar, Abhijit and Ghosh, M and Ray, Ajoy K and Ghosh, R N (2007) Effect of copper addition on the microstructure and mechanical properties of lead free solder alloy. Materials Science and Engineering A, 459 (1-2). pp. 69-74.

Ravi Kumar, B and Ghosh, M (2007) Surface and mid-plane texture evolution in austenite phase of cold rolled austenitic stainless steels. Materials Science and Engineering A, 457 (1-2). pp. 236-245.

Panda, A K and Mohanta, Ojaswini and Kumar, A and Ghosh, M and Mitra, A (2007) A Potential Co36Fe36Si4B20Nb4 nanocrystalline alloy for high temperature soft magnetic applications. Philosophical Magazine, 87 (11). pp. 1671-1682.

Panda, A K and Kumari, Seema and Chattoraj, I and Ghosh, M and Mitra, A (2007) Electron transport properties of Co71−xFexCr7Si8B14 (x=0, 2, 3.2, 4, 6,8 and 12 at%) amorphous alloys during devitrification. Journal of Magnetism and Magnetic Materials, 308 (1). pp. 65-70.

Kundu, Sukumar and Ghosh, M and Chatterjee, S (2006) Diffusion bonding of commercially pure titanium and 17-4 precipitation hardening stainless steel. Materials Science and Engineering A, 428 (1-2). pp. 18-23.

Kundu, Sukumar and Ghosh, M and Laik, A and Bhanumurthy, K and Kale, G B and Chatterjee, S (2005) Diffusion bonding of commercially pure titanium to 304 stainless steel using copper interlayer. Materials Science and Engineering A, 407 (1-2). pp. 154-160.

Ghosh, M and Chatterjee, S (2005) Effect of interface microstructure on the bond strength of the diffusion welded joints between titanium and stainless steel. Materials Characterization, 54 (4-5). pp. 327-337.

Ghosh, M and Das, Samar and Banarjee, P S and Chatterjee, S (2005) Variation in the reaction zone and its effects on the strength of diffusion bonded titanium–stainless steel couple. Materials Science and Engineering A, 390 (1-2). pp. 217-226.

Ghosh, M and Dutta, B K and Basumallick, A and Ghosh, S (2001) Preparation of copper-tin compacts by warm compaction route. Journal of Metallurgy and materials Science, 43 (2). pp. 119-125.

Venkatadri, A S and Ghosh, M and Ramaswamy, V and Tiwary, S K (1991) Pretreatment of hot metal with soda ash and with soda ash sodium-sulfate mixture. Ironmaking & Steelmaking, 18 (6). pp. 411-416.

Conference or Workshop Item

Ghosh, M and Kar, Abhijit and Kumar, K and Kailas, S V and Das, S K and Ray, Ajoy K (2011) Evaluation of interface microstructure for friction stir welded aluminium-stainless steel plate. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chakraborty, M and Ghosh, M and Das, S K and Mahato, B (2009) Synthesis and characterization of superparamagnetic Co & CoNi particles. In: TMS 2009 138th Annual Meeting & Exhibition - Supplemental Proceedings, Feb, 2009, TMS.

Ghosh, M and Kar, Abhijit and Ghosh, R N and Ray, Ajoy K (2008) A comparative study on the ageing behaviour of solder alloy-cu joint assemly using lead free solder and Sn-Pb eutectic solder alloy. In: The 3rd Asian Thermal Spray Conference (ATSC 2008), 2008, Singapore.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, Sukomal (2008) Influence of Austempering Temperature on Microstructure and Mechanical Properties of Cast Fe-Si-Mn-VSteel. In: 60 Annual Technical Meeting, November, 15-16, 2008, NML, Jamshedpur.

Kar, Abhijit and Ghosh, M and Ghosh, R N and Ray, Ajoy K (2007) Comparative study of tin lead and lead free solder joint interface. In: 2 nd International Conference on Recent Advances in Composite Materials (ICRACM-2007), February, 20-23, 2007, New Delhi.

Ray, Ajoy K and Kar, Abhijit and Ghosh, M (2007) Microstructural characterization of tin lead and lead free solder joint interface. In: Inter. Symp. on Advanced Materials and Processing, ISAMP-2007, 29-30 Oct. 2007, Basaveshwar Engineering College, Bagalkot..

Ghosh, M and Das, Swapan K and Singh, S R (2006) Investigation of caving-in incident of MIG 21 aircraft. In: National Conference on Failure Analysis – 2006, 22-23 Dec, 2006, Hyderabad.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, Sukomal (2006) Influence of Austempering Temperature on Microstructure and Mechanical Properties of Cast Fe-Si-Mn-VSteel. In: 60 Annual Technical Meeting, November, 14-16, 2006, NML, Jamshedpur.

Project Reports

Pramanick, A K and Gorai, S and Ghosh, M and Das, Goutam and Das, Swapan K (2014) Optimization of strength in V/N micro alloyed steel by varying vanadium content at fixed Nitrogen level. Collaborative (CLP). CSIR-NML, CSIR-NML, Jamshedpur. (Unpublished)

Bhattacharya, M and Sahu, Ranjan K and Ghosh, M and Das, S K and Mahato, B K and Goel, R P (2013) Chemical Synthesis of magnetic Co and CoNi nanoparticles and their characterization. Exploratory (OLP). CSIR -NML, Jamshedpur. (Submitted)

Ranjan, Maindra and Ghosh, M (2012) The Effect of Cooling Rates on Vanadium Microalloyed Steel. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Pramanick, A K and Ghosh, M and Das, Goutam and Das, Swapan K and Minj, R K and Ghosh Chowdhury, S (2012) Strengthening Mechanism of Nb and V Microalloyed Low C Steel Rebars and Slabs-Phase-II. Collaborative (CLP). CSIR-NML, www.nmlindia.org. (Unpublished)

Ghosh , M and Husain, M M and Das, Goutam and Das, S K and Upadhyay, A K and Singh, S R and Parida, N (2011) Metallurgical Analysis : Ground Incident to MIG-27 ML TS-615. Other (TMP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Ghosh, M and Husain, M M and Das, Goutam and Das, S K and Upadhyay, A K and Singh, S R and Parida, N (2011) Metallurgical Analysis:Flying Accident to Mig-27 ML TS - 579. Sponsored (SSP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Rajinikanth, V and Ray, Ajoy K and Das, Goutam and Ghosh, M and Das, Swapan K and De, P K (2008) Strain Hardening behavior of Al-Sc alloys. Exploratory (OLP). NML, Jamshedpur. (Submitted)

Panda, A K and Ghosh, M and Kumar, Arvind and Singh, S R and Mitra, A (2007) Development of Ferromagnetic Shape Memory Alloys by Rapid Solidification Route. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Sivaprasad, S and Ghosh, M and Das, Swapan K and Ghosh Chowdhury, S and Tarafder, S (2007) Evolution of Deformation-Induced Martensite during Fatigue Deformation of AISI 304LN Stainless Steel. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Ghosh, M and Singh, S R and Das, S K (2007) Metallurgical Analysis of the Damaged Wheel Hubs of AVRO HS-748 H-1517. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Ghosh, M and Singh, S R and Das, Swapan K (2007) Failure Investigation of Nose Jack Mounting Bracket of AVRO Aircraft H-1517. Other (TMP). CSIR-NML, Jamshedpur. (Submitted)

Rao, Ananda and Srikanth, S and Mehrotra, S P and Ravi Kumar, B and Alex, T C and Ghosh, M and Das, Swapan K (2007) Effect of Strain on Melting Point of Lead produced by Mechanical Milling. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Mandal, D and Ghosh, M and Pal, J and De, P K and Das, Goutam and Das, Swapan K and Ghosh Chowdhury, S and Lakra, B A and Ghosh, Sukomal (2006) Development of Cast Austempered Fe-Si-Mn-ME (Microalloying Elements) Steels. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

Singh, S R and Ghosh, M and Das, Swapan K (2006) Metallurgical Analysis of Copper Driving Band of GSH 30 MM HEI (INERT) Aircraft Ammunition of Russian Origin. Other (TMP). CSIR-NML, Jamshedpur. (Submitted)

Ghosh, M and Pramanick, A K and Ghosh Chowdhury, S and Singh, S R (2006) Phase Transformation in Secondary Reaction Zone (SRZ) in Polycrystalline Gas Turbine Blade made of Ni base Superalloy. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Kailath, A J and Panda, A K and Minz, R K and Das, Goutam and Ghosh, M and Kumar, A and Giri, A K and Mahato, B (2006) Synthesis and characterisation of Copper based bulk amorphous/nanophase alloys as melt spun ribbons. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

This list was generated on Tue Dec 10 16:35:22 2019 IST.