Items where Author is "Das, Arpan"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 42.

Das, Arpan (2018) Enigma of dislocation patterning due to slip in fatigued austenite. International Journal of Damage Mechanics, 27(2) (IF-1.783). pp. 218-237.

Das, Arpan (2017) Resurgence of texture in cyclically deformed austenite. Materials Characterization, 123 (IF 2.714). pp. 315-327.

Das, Arpan (2017) Grain boundary engineering: fatigue fracture. Philosophical Magazine, 97(11) (IF-1.505). pp. 867-916.

Das, Arpan (2016) Spatial Martensite. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 658 (IF-3.094). pp. 484-489.

Das, Arpan (2016) Contribution of deformation-induced martensite to fracture appearance of austenitic stainless steel. Materials Science and Technology, 32(13) (IF-1.180). pp. 1366-1373.

Das, Arpan (2016) Intervention of martensite variants on the spatial aspect of microvoids. Materials Research Express, 3(6) (IF-1.068).

Das, Arpan (2015) Crystallographic variant selection of martensite at high stress/strain. Philosophical Magazine, 95(20) (IF-1.427). pp. 2210-2227.

Das, Arpan (2015) Crystallographic variant selection of martensite during fatigue deformation. Philosophical Magazine, 95(8) (IF-1.427). pp. 844-860.

Das, Arpan (2015) Dislocation configurations through austenite grain misorientations. International Journal of Fatigue, 70 (IF-2.665). pp. 473-479.

Seth, P P and Das, Arpan and Bar, H N and Sivaprasad, S and Basu, A and Dutta, K (2015) Evolution of Dislocation Density During Tensile Deformation of BH220 Steel at Different Pre-strain Conditions. Journal of Materials Engineering and Performance, 24(7) (IF-0.998). pp. 2779-2783.

Das, Arpan (2014) Magnetic properties of cyclically deformed austenite. Journal of Magnetism and Magnetic Materials, 361 (IF-2.002). pp. 232-242.

Das, Arpan (2014) Slip System Activity During Cyclic Plasticity. Metallurgical and Materials Transactions A, 45 A (7) (IF-1.730). pp. 2927-2930.

Poddar, Palash and Das, Arpan and Sahoo, K L (2014) Dry Sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys. Metallurgical and Materials Transactions A , 45A(4) (IF-1.730). pp. 2270-2283.

Das, Arpan and Roy, Nilima and Ray, Ashok K (2014) Stress induced creep cavity. Materials Science and Engineering A, 598 (IF-2.409). pp. 28-33.

Poddar, Palash and Das, Arpan and Sahoo, K L (2014) Dry sliding wear characteristics of rheocast Mg–Sn based alloys. Materials & Design, 54 (IF-3.171). pp. 820-830.

Das, Arpan and Chowdhury, T and Tarafder, S (2014) Ductile fracture micro-mechanisms of high strength low alloy steels. Materials & Design, 54 (IF-3.171). pp. 1002-1009.

Dutta, Samik and Barat, K and Das, Arpan and Das, Swapan K and Shukla, A K and Roy, Himadri (2014) Characterization of micrographs and fractographs of Cu-strengthened HSLA steel using image texture analysis. Measurement, 47 (IF-1.526). pp. 130-144.

Selvam, S T and Chaudhuri, S and Das, Arpan and Dhara, S and Das, T P and Singh, U K (2013) Improving Productivity of Sinter Through Magnetic Segregation Chute at Sinter Plant, Bokaro Steel Plant, Bokaro Steel Plant. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Das, Arpan and Poddar, Palash (2013) Structure–wear-property correlation. Materials & Design, 47 (IF-2.913). pp. 557-565.

Das, Arpan (2013) Martensite–Void Interaction. Scripta Materialia, 68(7) (IF-2.821). pp. 514-517.

Palit Sagar, S and Metya, Avijit Kumar and Prakash, Amit and Das, Arpan (2013) Development of Methodology to Analyse the Amplitude of Ultrasonic Signal from Shell/Core Interface of ICDP Rolls. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Das, Arpan and Sivaprasad, S and Tarafder, Mita and Das, S K and Tarafder, S (2013) Estimation of Damage in high strength steels. Applied Soft Computing, 13(2) (IF-2.140). pp. 1033-1041.

Dutta, S and Das, Arpan and Barat, K and Roy, Himadri (2012) Automatic characterization of fracture surfaces of AISI 304LN stainless steel using image texture analysis. Measurement: Journal of the International Measurement Confederation, 45 (5). pp. 1140-1150.

Das, Arpan and Sivaprasad, S and Das, Swapan K and Tarafder, Mita and Tarafder, S (2012) Analysis of damage in high strength steels. In: 6th International Conference on Creep, Fatigue and Creep-Fatigue Interactions (CF-6), 22-25 Jan 2012, Mamallapuram, India.

Poddar, Palash and Das, Arpan and Sahoo, K L (2012) Effect of rare earth elements on tribological behaviour of magnesium alloys. Tribology: Materials, Surfaces & Interfaces, 6(4) . pp. 147-154.

Das, Arpan (2012) Phase transformation during tensile and low cycle fatigue deformation of AISI 304LN stainless steel. PhD thesis, Jadavpur University.

Das, Arpan and Tarafder, S and Chakraborti, P C (2011) Estimation of deformation induced martensite in austenitic stainless steels. Materials Science and Engineering A, 529 (1). pp. 9-20.

Das, Arpan and Chakraborti, P C and Tarafder, S and Bhadeshia, H K D H (2011) Analysis of deformation induced martensitic transformation in stainless steels. Materials Science and Technology, 27 (1). pp. 366-370.

Das, Arpan and Sivaprasad, S and Chakraborti, P C and Tarafder, S (2011) Connection between deformation-induced dislocation substructures and martensite formation in stainless steel. Philosophical Magazine Letters Online ISSN 1362-3036, 91 (10). pp. 664-675.

Das, Arpan and Sivaprasad, S and Chakraborti, P C and Tarafder, S (2011) Morphologies and characteristics of deformation induced martensite during low cycle fatigue behaviour of austenitic stainless steel. Materials Science and Engineering A, 528 (27). pp. 7909-7914.

Sivaprasad, S and Paul, Surajit Kumar and Das, Arpan and Narasaiah, N and Tarafder, S (2010) Cyclic plastic behaviour of primary heat transport piping materials: Influence of loading schemes on hysteresis loop. Materials Science and Engineering: A, 527 (26). pp. 6858-6869.

Sahu, Puspendu and Curtze, Sven and Das, Arpan and Mahato, B and Kuokkala, Veli Tapani and Ghosh Chowdhury, S (2010) Stability of austenite and quasi-adiabatic heating during high-strain-rate deformation of twinning-induced plasticity steels. Scripta Materialia, 62 (1). pp. 5-8.

Das, Arpan and Das, Swapan K and Tarafder, S (2009) Correlation of Fractographic Features with Mechanical Properties in Systematically Varied Microstructures of Cu-Strengthened High-Strength Low-Alloy Steel. Metallurgical and Materials Transactions A, 40 (13). pp. 3138-3146.

Das, Arpan and Tarafder, S (2009) Experimental investigation on martensitic transformation and fracture morphologies of austenitic stainless steel. International Journal of Plasticity, 25 (11). pp. 2222-2247.

Das, Arpan and Sivaprasad, S and Chakraborti, P C and Tarafder, S (2008) Correspondence of fracture surface features with mechanical properties in 304LN stainless steel. Materials Science and Engineering: A, 496 (1-2). pp. 98-105.

Das, Arpan and Tarafder, S (2008) Geometry of dimples and its correlation with mechanical properties in austenitic stainless steel. Scripta Materialia, 59 (9). pp. 1014-1017.

Das, Arpan and Das, S K and Sivaprasad, S and Tarafder, S (2008) Fracture-property correlation in copper-strengthened high-strength low-alloy steel. Scripta Materialia, 59 (7). pp. 681-683.

Das, Arpan and Sivaprasad, S and Ghosh, M and Chakraborti, P C and Tarafder, S (2008) Morphologies and characteristics of deformation induced martensite during tensile deformation of 304 LN stainless steel. Materials Science and Engineering A, 486 (1-2). pp. 283-286.

Ghosh Chowdhury, S and Kumar, P and Das, Arpan and Das, Swapan K and Mahato, B and De, P K (2008) Evolution of grain-boundary character distribution during iterative processing of an austenitic stainless steel. Philosophical Magazine Letters Online ISSN 1362-3036, 88 (6). pp. 407-414.

Ravi Kumar, B and Das, Swapan K and Mahato, B and Das, Arpan (2007) Effect of large strains on grain boundary character distribution in AISI 304L austenitic stainless steel. Materials Science and Engineering A, 454-455 . pp. 239-244.

Ray, Ashok K and Goswami, B and Singh, M P and Das, D K and Roy, Nilima and Ravi Kumar, B and Dash, Byomkesh and Ray, Ajoy K and Das, Goutam and Rupa, P K P and Parida, N and Das, Arpan and Swaminathan, J and Dwarakadasa, E S (2006) Characterization of bond coat in a thermal barrier coated superalloy used in combustor liners of aero engines. Materials Characterization, 57 (3). pp. 199-209.

Jindal, Vikas and Srivastava, V C and Das, Arpan and Ghosh, R N (2006) Reactive diffusion in the roll bonded iron–aluminum system. Materials Letters, 60 (13-14). pp. 1758-1761.

This list was generated on Thu Mar 28 21:12:50 2024 IST.